Uputstvo za upotrebu mini 3D štampača Easythreed X1 FDM

1. Uvod

Thank you for choosing the Easythreed X1 FDM Mini 3D Printer. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new 3D printer. Designed for beginners, the X1 offers high printing accuracy and an upgraded extruder technology, making it an excellent entry-level device for various creative and educational projects.

Figure 1: Easythreed X1 FDM Mini 3D Printer

2. Sigurnosne informacije

Please read all safety warnings and instructions carefully before using the printer to prevent injury or damage to the device.

• Vruće površine: The print nozzle and heated bed can reach high temperatures. Do not touch these components during operation or immediately after printing. Allow them to cool completely before handling.
• Pokretni dijelovi: Keep hands, hair, and loose clothing away from moving parts during operation to avoid entanglement.
• električna sigurnost: Use only the provided power adapter. Do not operate the printer with damaged cables or plugs. Ensure the printer is placed on a stable, level surface away from water or flammable materials.
• ventilacija: Operate the printer in a well-ventilated area, especially when printing with certain filament types that may emit fumes.
• djeca: This 3D printer is suitable for children, but it must be operated under the direct supervision and guidance of parents or responsible adults.

3. Šta se nalazi u kutiji

Provjerite da li su sve komponente prisutne nakon raspakivanja:

• Easythreed X1 3D Printer Unit
• Adapter za napajanje
• TF Card (with pre-loaded Gcode files)
• Small amount of PLA Filament for testing
• Korisnički priručnik (ovaj dokument)

4. Podešavanje

Follow these steps for the initial setup of your Easythreed X1 3D Printer.

4.1 Raspakivanje i postavljanje

Carefully remove the printer from its packaging. Place the printer on a stable, flat, and level surface. Ensure there is enough space around the printer for proper ventilation and operation.

4.2 Komponenta je završenaview

Figure 2: Key Components of the X1 Printer

4.3 Priključak za napajanje

Connect the power adapter to the printer's power input port and then plug it into a wall outlet. The printer does not have a dedicated on/off switch; it powers on when plugged in.

4.4 Bed Leveling (Crucial Step)

Proper bed leveling is the most critical step for successful prints. Incorrect leveling can lead to print failures or damage to the magnetic plate.

1. Press the 'Home' button on the control panel. The print head will move to the home position.
2. Once the nozzle touches the magnetic plate, immediately disconnect the power. This prevents the nozzle from pressing too hard against the bed.
3. Manually move the print head to each of the four corners of the build plate.
4. Use a piece of A4 paper (standard printer paper) as a feeler gauge. Adjust the leveling screws under the build plate at each corner until the paper slides with slight resistance between the nozzle and the build plate. The paper should feel a slight drag, but not be gripped tightly.
5. Repeat this process for all four corners multiple times until the paper slides consistently with slight resistance at every point.

For visual guidance on bed leveling, please refer to the official Easythreed X1 3D Printer video:

4.5 Punjenje filamenta

The X1 printer supports 1.75mm PLA/TPU filament. PLA is recommended for beginners due to its ease of use and environmental friendliness.

Figure 3: Supported PLA/TPU Filament

1. Place the filament spool onto the designated spool holder.
2. Gently feed the filament into the small hole on the extruder assembly.
3. Press the "+" button on the control panel. The extruder will begin to pull the filament into the hotend. Continue holding until filament starts extruding from the nozzle.

5. Uputstvo za upotrebu

The Easythreed X1 is designed for simple operation, especially for beginners.

5.1 Preparing a Print (Gcode Files)

The printer reads Gcode files directly from the TF card. If you are a beginner and do not have 3D slicing software, you can use pre-sliced Gcode files or download them from online repositories.

1. Insert the TF card (containing your Gcode file) into the TF card slot on the control unit.
2. Provjerite da li je ploča za izradu čista i pravilno nivelisana.

5.2 Početak štampanja

Once the TF card is inserted and filament is loaded:

1. Press the 'Play' button on the control panel. The printer will begin heating the nozzle.
2. Once the nozzle reaches the target temperature (approx. 180°C for PLA), the printing process will automatically start.

5.3 Stopping a Print

To stop a print at any time, press the 'Play' button again. The printer will pause or stop the current operation.

5.4 Filament Replacement/Removal

To replace or remove filament:

1. Press the "-" button on the control panel. The extruder will reverse the filament.
2. Wait for a few moments until the filament is sufficiently retracted, then gently pull it out from the extruder.
3. To load new filament, follow the steps in Section 4.5.

5.5 Removing a Finished Print

The X1 features a flexible and removable magnetic build plate, making print removal easy.

Figure 4: Flexible Magnetic Build Plate

1. Allow the print and the build plate to cool down completely.
2. Carefully remove the magnetic build plate from the printer.
3. Gently flex the build plate to detach the printed object.

6. Održavanje

Redovno održavanje osigurava optimalne performanse i dugotrajnost vašeg 3D printera.

6.1 Čišćenje mlaznice

If the nozzle has excess filament or appears clogged, carefully remove it using appropriate tools (e.g., tweezers or a small brush) while the nozzle is heated. Do not touch the hot nozzle with bare hands.

Figure 5: High Precision Print Head

6.2 Cleaning the Build Plate

After removing prints, clean the magnetic build plate with a soft cloth and isopropyl alcohol to ensure good adhesion for subsequent prints.

6.3 Generalno čišćenje

Periodically wipe down the printer's frame and components to remove dust and filament debris. Avoid using abrasive cleaners or solvents.

7. Otkrivanje problema

Evo rješenja za uobičajene probleme s kojima se možete susresti:

8. Specifikacije

9. Garancija i podrška

All Easythreed printers come with a one-year warranty from the date of purchase. Additionally, lifetime technical support is provided for all Easythreed products.

If you encounter any issues with your product, including damage during shipping or operational problems, please contact Easythreed customer support for assistance or a free replacement.

For further support and resources, please visit the official Easythreed Store: Easythreed Store on Amazon