Rockville BASS Blaster 12 800W kućni audio subwoofer - uputstvo za upotrebu

Uvod

The Rockville BASS Blaster 12 is a powerful 800W peak (400W RMS) powered subwoofer designed to enhance your home theater, music, and gaming experiences with deep, impactful bass. Featuring a 12-inch high-grade woofer with a Y30 magnet and foam surround, it delivers clear, low-frequency audio. This manual provides detailed instructions for setting up, operating, and maintaining your subwoofer.

Karakteristike

• Deep, Powerful Bass: 800W peak / 400W RMS power and a 12-inch high-grade woofer with Y30 magnet and foam surround deliver rich low frequencies for movies, music, and gaming.
• Prilagodljiv zvuk: Adjustable crossover control and phase switch (0°/180°) let you fine-tune bass to match your system.
• Sound-Activated LED: Built-in LED lighting pulsates to music, movie effects, or games, with an on/off switch for control.
• Izdržljiva konstrukcija: MDF enclosure with vinyl leather finish, detachable foam grill, and fire-resistant poly cotton filling reduce distortion and enhance longevity.
• Jednostavna integracija: RCA and speaker-level inputs/outputs for flexible setup; compact design (17.2" x 16" x 16.4"); compatible with 110-240V power.

Sadržaj paketa

• Rockville BASS Blaster 12 Powered Subwoofer
• Standard IEC Power Cable
• Garantni list proizvoda

Product Overview

Front View

Kontrole i priključci na zadnjoj ploči

• Prekidač: Uključuje ili isključuje subwoofer.
• Kontrola jačine zvuka: Podešava ukupni izlazni nivo subwoofera.
• Frequency Control (LPF): A low-pass filter adjustable from 50Hz to 150Hz. This allows you to set the upper frequency limit for the subwoofer, ensuring it only plays the desired low-end frequencies.
• Fazni prekidač (0°/180°): Adjusts the phase of the subwoofer to ensure it is in sync with other speakers in your audio system, preventing cancellation or muddy bass.
• Auto On/Off Switch: When set to 'Auto', the subwoofer will go into standby mode when no audio signal is detected and power on automatically when a signal is present. When set to 'On', the subwoofer remains powered on.
• RCA Line In/Out: RCA inputs for connecting to a receiver, studio interface, or gaming console. RCA outputs allow you to pass the audio signal to other components in your setup.
• High Level Input/Output: Speaker-level inputs for connecting directly from speaker wire, useful if your receiver lacks RCA outputs. High-level outputs allow you to daisy-chain to other passive speakers.
• LED On/Off Switch: Controls the sound-activated LED lighting feature on the front of the subwoofer.

Postavljanje i instalacija

Before connecting, ensure all audio equipment is powered off. Refer to the following video for a detailed setup guide:

RCA Line Level Connection

1. Connect an RCA cable from the subwoofer output (often labeled 'Sub Out' or 'LFE Out') of your receiver or audio source to the RCA Line In (L/R) on the BASS Blaster 12.
2. If your source has separate Left and Right RCA outputs for the subwoofer, connect both. If it has a single LFE output, connect it to the 'L' input on the subwoofer.
3. If you wish to pass the signal to another device, connect RCA cables from the Line Out (L/R) on the subwoofer to the inputs of the next device.

Povezivanje nivoa zvučnika

1. Connect speaker wires from the speaker outputs of your amplifier/receiver to the High Level Input (L+/L-, R+/R-) terminals on the BASS Blaster 12. Ensure correct polarity (+ to + and - to -).
2. Connect your main passive speakers from the High Level Output (L+/L-, R+/R-) terminals on the BASS Blaster 12. This allows the subwoofer to receive the full range signal and then pass the filtered signal to your main speakers.

Uputstvo za upotrebu

Once connected, you can power on your BASS Blaster 12 and adjust its settings for optimal performance.

Uključivanje/isključivanje

1. Okrenite Prekidač za napajanje to the 'On' position. The power indicator LED will illuminate.
2. Alternatively, set the Prekidač za automatsko uključivanje/isključivanje to 'Auto'. The subwoofer will enter standby mode when no signal is present and automatically power on when an audio signal is detected.

Podešavanje postavki zvuka

1. Volumen: Rotirajte Kontrola jačine zvuka knob to increase or decrease the subwoofer's output level. Start with a low volume and gradually increase it to match your main speakers.
2. Frequency (LPF): Podesite Kontrola frekvencije knob to set the upper limit of frequencies the subwoofer will reproduce. This should be set to blend seamlessly with your main speakers. A common starting point is around 80-100Hz.
3. faza: Koristite Fazni prekidač (0°/180°) to ensure the subwoofer's output is in phase with your main speakers. Experiment with both settings to find the one that produces the most impactful and coherent bass.

LED rasvjeta

The BASS Blaster 12 features sound-activated LED lighting. Use the LED prekidač za uključivanje/isključivanje on the rear panel to enable or disable this feature.

Za sveobuhvatan krajview of the subwoofer's features and operation, please watch this video:

Razmatranje plasmana

The placement of your subwoofer can significantly impact its performance. Consider the following:

• Ugaoni položaj: Placing the subwoofer in a corner can maximize its output and impact, but may sometimes lead to boomy or exaggerated bass.
• Near Main Speakers: Placing the subwoofer close to your main speakers can help create a more seamless blend between the subwoofer and the main speakers, improving overall sound coherence.
• Eksperimentiranje: The ideal placement often depends on your room's acoustics. Experiment with different locations to find the best balance of bass response and integration with your system.

Specifikacije

Rješavanje problema

If you encounter issues with your Rockville BASS Blaster 12, refer to the following common solutions:

• Nema zvuka:
  • Ensure the subwoofer is powered on and the power LED is illuminated.
  • Check all audio connections (RCA or speaker level) are secure and correctly connected.
  • Verify the volume control on the subwoofer is not set to minimum.
  • If using 'Auto On/Off', ensure an audio signal is being sent to the subwoofer.
• izobličeni zvuk:
  • Reduce the volume level on the subwoofer and/or your audio source.
  • Adjust the Frequency (LPF) control to ensure the subwoofer is not attempting to reproduce frequencies too high for its design.
  • Provjerite ima li labavih spojeva ili oštećenih kablova.
• pregrijavanje:
  • Ensure adequate ventilation around the subwoofer. Do not block any vents.
  • Reduce prolonged high-volume usage.

Održavanje

To ensure the longevity and optimal performance of your BASS Blaster 12 subwoofer, follow these maintenance guidelines:

• čišćenje: Za čišćenje vanjske strane subwoofera koristite meku, suhu krpu. Izbjegavajte upotrebu abrazivnih sredstava za čišćenje ili rastvarača.
• ventilacija: Provjerite da ventilacijski otvori subwoofera nisu blokirani kako biste omogućili pravilan protok zraka i spriječili pregrijavanje.
• Skladištenje: Ako subwoofer skladištite duži period, čuvajte ga na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.

Garancija i podrška

For warranty information or technical assistance, please refer to your product warranty card included in the package. You can also visit the official Rockville support webweb-stranicu ili kontaktirajte korisničku službu:

• Online podrška: rockvillesupport.com/bass-blaster-12
• Služba za korisnike: 1-646-758-0144 (Open 24/7)
• Podrška putem e-pošte: sales@rockvilleaudio.com