HANMATEK CM10 Digitalni Clamp Korisnički priručnik za multimetar

1. Uvod

The HANMATEK CM10 is a stable, safe, and reliable 3 1/2 digit LCD display digital clamp multimeter designed for various electrical measurements. It is capable of accurately measuring AC/DC voltages, AC currents, resistances, diodes, and continuity. This device features an auto-ranging function, data hold, Max/Min value recording, automatic power-off, low battery indication, and a continuity buzzer, making it a versatile tool for both professional and home use.

2. Sigurnosne informacije

Please read and understand all safety information and operating instructions before using this meter. Failure to do so may result in electric shock, injury, or damage to the meter or equipment under test.

• Uvijek se uvjerite da je mjerač u ispravnoj funkciji i rasponu prije mjerenja.
• Ne primjenjivati ​​voltage ili struja koja prelazi maksimalne specificirane granice za brojilo.
• Exercise extreme caution when working with live circuits. Avoid contact with bare conductors or terminals.
• Ne koristite mjerač ako izgleda oštećeno ili ako su mjerni kabeli oštećeni.
• Odmah zamijenite baterije kada se pojavi indikator slabe baterije kako biste osigurali tačna očitavanja.
• Always disconnect the test leads from the circuit before changing the function switch.
• This meter is designed with double insulation and anti-burn overload protection. However, proper safety practices must always be followed.

3. Proizvod je gotovview

The HANMATEK CM10 Digital Clamp Multimeter features an ergonomic design with a large jaw opening for precise current detection. Below is a diagram illustrating the main components of the device.

Slika 3.1: Labeled components of the HANMATEK CM10 Digital Clamp Multimeter. Key parts include the AC current conversion clamp, pliers trigger, backlight and data save button, LCD display, COM port (public port), measurement signal input, induction probe for NCV test, range and function selection knob, maximum and minimum selection buttons, and function selection button.

Ključne karakteristike:

• Multifunkcionalno mjerenje: Mjere AC/DC Voltage, AC Current, Resistance, Diode, and Continuity.
• Automatsko rangiranje: Automatski bira odgovarajući opseg mjerenja.
• NCV (Non-Contact Voltage) Test: For detecting live wires without physical contact.
• Zadržavanje podataka: Freezes the displayed measurement value.
• Funkcija MAX/MIN: Records maximum and minimum readings.
• LCD ekran sa pozadinskim osvetljenjem: Ensures clear readability in dark environments.
• Automatsko isključivanje: Štedi bateriju nakon 15 minuta neaktivnosti.
• Indikator slabe baterije: Upozorenja kada je potrebno zamijeniti baterije.
• Zvučnik kontinuiteta: Audible indication for continuity tests.

4. Podešavanje

Before using your HANMATEK CM10 Digital Clamp Multimeter, you need to install the batteries.

4.1 Instalacija baterije

1. Pronađite poklopac odjeljka za baterije na stražnjoj strani mjerača.
2. Upotrijebite odvijač da otvorite odjeljak za baterije.
3. Umetnite dvije AAA baterije, pazeći na ispravan polaritet (+ i -).
4. Vratite poklopac odeljka za baterije i pričvrstite ga vijkom.

Slika 4.1: The HANMATEK CM10 Digital Clamp Multimeter package includes the meter, a carrying case, test leads, and two AAA batteries for operation.

5. Uputstvo za upotrebu

This section details how to use your HANMATEK CM10 for various measurements. Always ensure the meter is set to the appropriate function before connecting to a circuit.

Slika 5.1: The HANMATEK CM10 is widely used for various applications including air conditioning maintenance, household socket detection, car maintenance, and industrial electricity detection.

5.1 Mjerenje naizmjenične struje

1. Turn the rotary switch to the '200A~' or '20A~' range for AC current.
2. Press the pliers trigger to open the clamp vilica.
3. Enclose only one conductor of the circuit with the clamp vilica. Provjerite je li vilica potpuno zatvorena.
4. Očitajte vrijednost AC struje na LCD ekranu.

5.2 AC/DC Voltage Measurement

1. Insert the red test lead into the 'INPUT' jack and the black test lead into the 'COM' jack.
2. Turn the rotary switch to the 'V~' for AC voltage ili 'V=' za DC voltage.
3. Spojite mjerne kabele paralelno s krugom ili komponentom koju želite izmjeriti.
4. Pročitajte voltage vrijednost na LCD zaslonu.

Slika 5.2: Mjerenje DC voltage of a battery using the test leads.

5.3 Mjerenje otpora, diode i kontinuiteta

1. Insert the red test lead into the 'INPUT' jack and the black test lead into the 'COM' jack.
2. Okrenite rotacijski prekidač u položaj 'Ω'.
3. For Resistance: Connect the test leads across the component.
4. For Diode: Connect the red lead to the anode and the black lead to the cathode. The display will show the forward voltagpad e. Zamijenite mjesta provodnicima kako biste provjerili da li postoji otvoreni strujni krug.
5. For Continuity: Connect the test leads across the circuit. If the resistance is below approximately 50Ω, the buzzer will sound.

Slika 5.3: Using test leads to measure resistance or continuity on a circuit board.

5.4 NCV (Beskontaktni volumentage) Test

1. Okrenite rotacijski prekidač u položaj 'NCV'.
2. Move the top part of the meter (induction probe) close to the conductor or electrical outlet you want to test.
3. Ako je AC voltage is detected, the meter will emit an audible beep and the NCV indicator light will flash. The display will show 'EF'. The NCV measurement range is 90-1000V.

Slika 5.4: Performing a Non-Contact Voltage (NCV) test with the HANMATEK CM10.

5.5 Funkcija zadržavanja podataka

1. While taking a measurement, press the 'HOLD' button to freeze the current reading on the display.
2. Press the 'HOLD' button again to release the data hold and resume live measurements.

Slika 5.5: Activating the Data Hold function to retain a measurement reading.

5.6 Pozadinsko osvjetljenje ekrana

1. Press the backlight button (often combined with the 'HOLD' or 'MAX/MIN' button, or a dedicated light button) to turn on the display backlight.
2. This feature is useful for reading measurements in dimly lit environments.
3. Press the button again to turn off the backlight.

Slika 5.6: The backlit display ensures clear visibility of readings in low-light conditions.

6. Održavanje

Proper maintenance ensures the longevity and accuracy of your HANMATEK CM10 Digital Clamp Multimetar.

6.1 Čišćenje

• Obrišite c mjeračaasing s oglasomamp krpa i blagi deterdžent. Ne koristite abrazive ili otapala.
• Keep the test leads clean and free from dust or debris.

6.2 Zamjena baterije

• Kada se na ekranu pojavi indikator slabe baterije, zamijenite baterije kao što je opisano u Odjeljku 4.1.
• Remove batteries if the meter is not going to be used for an extended period to prevent leakage.

7. Otkrivanje problema

If you encounter issues with your HANMATEK CM10, refer to the following common problems and solutions:

8. Specifikacije

9. Garancija i podrška

The HANMATEK CM10 Digital Clamp Multimeter comes with a smart anti-burn thermistor, durable construction, and anti-burn overload protection, ensuring double insulation for user safety. HANMATEK provides lifetime technical support for this product. If you have any questions or require assistance, please contact HANMATEK customer service.