CAT DX56U 7-1/4'' kružna pila s kablom Uputstvo za upotrebu

1. Sigurnosne informacije

Always observe basic safety precautions when using power tools to reduce the risk of fire, electric shock, and personal injury. Read and understand all instructions before operating this circular saw.

Opća sigurnosna upozorenja za električni alat:

• Sigurnost radnog područja: Radno područje održavajte čistim i dobro osvijetljenim. Nered ili tamna područja mogu uzrokovati nesreće. Ne koristite električne alate u eksplozivnim atmosferama, kao što je prisustvo zapaljivih tekućina, plinova ili prašine.
• električna sigurnost: Utikači električnih alata moraju odgovarati utičnici. Nikada ne mijenjajte utikač ni na koji način. Izbjegavajte kontakt tijela sa uzemljenim površinama kao što su cijevi, radijatori, šporeti i frižideri.
• Lična sigurnost: Always wear eye protection. Use hearing protection when operating the saw. Dress properly; avoid loose clothing or jewelry. Secure long hair.
• Upotreba i njega alata: Ne forsirajte električni alat. Koristite odgovarajući električni alat za vašu primjenu. Isključite utikač iz izvora napajanja prije bilo kakvih podešavanja, promjene pribora ili skladištenja električnog alata.

Circular Saw Specific Safety Warnings:

• Keep Hands Away: Držite ruke dalje od područja rezanja i oštrice. Držite drugu ruku na pomoćnoj ručki ili kućištu motora. Ako obje ruke drže testeru, sečivo ih ne može rezati.
• Do Not Reach Under Workpiece: Do not reach underneath the workpiece when the blade is rotating.
• Adjust Depth and Bevel: Podesite dubinu rezanja debljini radnog komada. Ispod radnog predmeta trebalo bi da bude vidljivo manje od celog zuba sečiva.
• Never Hold Workpiece in Hand: Nikada ne držite radni predmet u rukama ili preko noge dok sečete. Pričvrstite radni komad na stabilnu platformu.
• Check Lower Guard: Before each use, check the lower guard for proper closing. Do not operate the saw if the lower guard does not move freely and close instantly.
• Izbjegavajte povratni udar: Kickback is a sudden reaction to a pinched, bound, or misaligned saw blade. Always maintain a firm grip on the saw with both hands and position your body and arm to resist kickback forces.

2. Proizvod je gotovview

The CAT DX56U 7-1/4'' Corded Circular Saw is designed for efficient and precise cutting of wood materials. It features a powerful motor and user-friendly adjustments for various cutting tasks.

Slika 1: Prednja strana view of the CAT DX56U 7-1/4'' Corded Circular Saw, highlighting its blade, guard, and handle.

Ključne karakteristike:

• Powerful 15A motor delivering 6,000 RPM for tough materials.
• Lock-on switch for continuous operation.
• Electric blade brake for quick blade stops and enhanced safety.
• Spindle lock for efficient blade changes.
• Integrated dust blower function to maintain a clear line of sight during cutting.
• Swiveling ball joint cord connection for improved mobility and prolonged cord life.
• Lightweight magnesium base plate and guard for durability.
• Extra long, 10-foot power cord.

3. Podešavanje

3.1 Raspakivanje

Carefully remove the circular saw and all accessories from the packaging. Inspect the tool for any damage that may have occurred during shipping. Retain the packaging for future storage or transport.

3.2 Ugradnja i uklanjanje oštrice

1. Provjerite je li pila isključena iz izvora napajanja.
2. Pritisnite i držite dugme za zaključavanje vretena kako biste spriječili okretanje oštrice.
3. Use the provided hex key to loosen the blade arbor nut by turning it counter-clockwise.
4. Lift the lower blade guard and remove the outer washer and old blade.
5. Place the new 7-1/4" blade onto the arbor, ensuring the teeth are pointing in the direction of rotation indicated by the arrow on the saw.
6. Replace the outer washer and tighten the arbor nut securely with the hex key by turning it clockwise while holding the spindle lock button.

3.3 Podešavanje dubine rezanja

The cutting depth should be set so that the blade extends approximately 1/8 inch (3 mm) below the workpiece. This minimizes kickback and provides a cleaner cut.

1. Isključite pilu.
2. Otpustite polugu za podešavanje dubine koja se nalazi sa strane pile.
3. Raise or lower the saw base plate until the desired blade depth is achieved.
4. Čvrsto zategnite polugu za podešavanje dubine.

3.4 Podešavanje ugla kosine

Pila može praviti zakošene rezove do 45 stepeni.

1. Isključite pilu.
2. Loosen the bevel adjustment lever at the front of the saw.
3. Tilt the base plate to the desired angle, aligning the indicator with the angle scale.
4. Čvrsto zategnite polugu za podešavanje nagiba.

3.5 Pričvršćivanje paralelne vodilice

The parallel guide assists in making straight cuts parallel to the edge of the workpiece.

1. Slide the parallel guide into the slots on the front of the saw base plate.
2. Podesite vodilicu na željenu širinu rezanja.
3. Tighten the thumbscrew to secure the guide in place.

Image 2: The circular saw positioned on a wooden workbench, ready for use, with a user preparing the workpiece.

4. Uputstvo za upotrebu

4.1 Uključivanje i isključivanje

1. Uključite pilu u odgovarajuću utičnicu.
2. Da biste pokrenuli pilu, pritisnite okidač.
3. For continuous operation, press the lock-on button while the trigger is depressed. Release the trigger to engage the lock-on feature.
4. To stop the saw from continuous operation, depress the trigger fully and then release it. The electric brake will stop the blade quickly.

4.2 Pravljenje reza

1. Uvjerite se da je radni komad sigurno prikljamped i stabilan.
2. Position the front of the saw base plate flat on the workpiece, with the blade clear of the material.
3. Pokrenite pilu i pustite da list dostigne punu brzinu prije početka rezanja.
4. Slowly push the saw forward through the workpiece, maintaining a steady, even pressure. Do not force the saw.
5. Keep both hands firmly on the saw handles during the entire cutting process.
6. Nakon što je rez završen, otpustite okidač i pričekajte da se list pile potpuno zaustavi prije nego što ga podignete s radnog komada.

Image 3: The circular saw in operation, cutting through a wooden board, with sawdust visible.

4.3 Integrated Dust Blower

The integrated dust blower directs air towards the cutting line, helping to keep it clear of sawdust for improved visibility during operation.

5. Održavanje

Redovno održavanje osigurava dugotrajnost i siguran rad vaše kružne pile. Uvijek isključite alat iz struje prije bilo kakvog održavanja.

5.1 Čišćenje

• After each use, clean the saw with a soft, dry cloth.
• Use compressed air to clear dust from the motor vents and blade guard area.
• Ne koristite jake kemikalije ili abrazivna sredstva za čišćenje.

5.2 Pregled lopatica

• Redovno provjeravajte oštricu da li je oštrica oštra, ima li pukotina ili nedostajućih zuba. Odmah zamijenite tupe ili oštećene oštrice.
• Ensure the blade is clean and free of resin buildup, which can affect cutting performance.

5.3 Power Cord Care

• Inspect the power cord for cuts, fraying, or damage before each use.
• Do not use the saw if the cord is damaged.
• Avoid wrapping the cord tightly around the tool, as this can cause damage.

6. Otkrivanje problema

Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti pri korištenju kružne pile.

• Pila se ne pokreće: Check if the saw is properly plugged into a working outlet. Ensure the power cord is not damaged.
• Blade stalls during cut: The blade may be dull, or you might be forcing the saw too hard. Reduce feed pressure, or replace the blade. Ensure the cutting depth is correctly set.
• Prekomjerne vibracije ili buka: Check if the blade is securely installed and not damaged. Ensure all fasteners are tight.
• Netačni rezovi: Verify that the depth and bevel adjustments are securely locked. Ensure the workpiece is stable and the parallel guide (if used) is correctly set.

Ako problemi potraju, obratite se korisničkoj podršci ili kvalificiranom servisnom tehničaru.

7. Specifikacije

Technical specifications for the CAT DX56U 7-1/4'' Corded Circular Saw.

8. Garancija i podrška

This CAT DX56U 7-1/4'' Corded Circular Saw comes with a 3-Year Limited Manufacturer's Warranty. This warranty covers defects in materials and workmanship under normal use.

Garancijski zahtjevi:

For warranty service or technical support, please refer to the contact information provided in your product packaging or visit the official CAT Tools webSačuvajte dokaz o kupovini radi provjere garancije.

Planovi zaštite:

Prošireni planovi zaštite mogu se kupiti zasebno. Ovi planovi nude dodatnu pokrivenost pored standardne garancije proizvođača.

• Dvogodišnji plan zaštite
• Dvogodišnji plan zaštite