Maxxima 4 in. 5 CCT Ultra Thin Recessed LED Downlight Instruction Manual

Uvod

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Maxxima 4-inch 5 CCT Ultra Thin Recessed LED Downlight. Please read all instructions carefully before installation and retain this manual for future reference.

Slika: Front view of the Maxxima 4-inch 5 CCT Ultra Thin Recessed LED Downlight.

Sigurnosne informacije

To reduce the risk of fire, electric shock, or injury to persons, please observe the following safety precautions:

• Uvijek isključite napajanje na prekidaču prije početka instalacije ili bilo kakvog održavanja.
• Osigurajte da svi električni priključci budu u skladu s lokalnim propisima i uredbama, kao i s Nacionalnim električnim kodeksom (NEC).
• Ako niste sigurni u vezi ožičenja, obratite se kvalificiranom električaru.
• Ne instalirajte na mjestima gdje radna temperatura prelazi nazivnu temperaturu uređaja.
• Ovaj uređaj je pogodan za damp locations and is IC Rated, meaning it is safe for direct contact with insulation.
• Ne modificirajte uređaj niti ga koristite u druge svrhe osim za one za koje je namijenjen.

Sadržaj paketa

Prije početka instalacije provjerite da li su sve komponente prisutne:

• 1 x Maxxima 4 in. 5 CCT Ultra Thin Recessed LED Downlight
• 1 x Junction Box (J-Box) with integrated power supply
• Montažni hardver

Specifikacije

Postavljanje i instalacija

Slijedite ove korake za pravilnu instalaciju:

1. Isključite napajanje: Before starting any electrical work, ensure the power supply to the installation area is turned off at the circuit breaker.
2. Priprema otvora na plafonu: Cut a 4-inch diameter hole in the ceiling at the desired location. Ensure there are no obstructions such as joists or pipes.
3. Povežite ožičenje: Open the junction box cover. Connect the supply wires to the wires inside the junction box using the provided wire nuts:
   • Connect the black wire from the supply to the black wire of the J-Box.
   • Connect the white wire from the supply to the white wire of the J-Box.
   • Connect the ground wire from the supply to the green wire of the J-Box.
   Secure the junction box cover.

Image: The LED downlight connected to its junction box.
4. Odaberite temperaturu boje (CCT): Before inserting the light into the ceiling, locate the CCT selection switch on the side of the junction box. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch.


Slika: Krupni plan view of the CCT selection switch located on the side of the junction box.

5. Umetnite razvodnu kutiju: Place the wired junction box into the ceiling opening.
6. Ugradnja ugradne svjetiljke: Connect the downlight to the junction box via the male/female connector. Push the spring clips on the sides of the downlight upwards and insert the fixture into the ceiling hole. The clips will automatically secure the light in place.


Slika: Sa strane view of the downlight showing the tension spring clips used for installation.

7. Vrati snagu: Ponovo uključite struju na prekidaču.

Uputstvo za upotrebu

Odabir temperature boje

The Maxxima 4-inch LED Downlight features 5 CCT (Correlated Color Temperature) options, allowing you to customize the light output to your preference. The selection switch is located on the side of the junction box.

• 2700K: Soft White (Warm, inviting light)
• 3000K: Warm White (Slightly brighter, still warm)
• 3500K: Bright White (Neutral, balanced light)
• 4000K: Neutral White (Cooler, more energetic light)
• 5000K: Daylight (Brightest, closest to natural daylight)

To change the CCT, you must access the junction box. It is recommended to select your preferred CCT before final installation into the ceiling. If changing after installation, ensure power is off before accessing the J-Box.

Image: Visual representation of the five selectable color temperatures.

Funkcionalnost zatamnjivanja

This LED downlight is dimmable from 20% to 100% when used with a compatible LED dimmer switch. Ensure your dimmer switch is rated for LED lighting to prevent flickering or damage to the fixture.

Održavanje

The Maxxima LED Downlight requires minimal maintenance.

• čišćenje: Prije čišćenja provjerite je li napajanje isključeno. Obrišite uređaj mekom, suhom ili blago natopljenom krpom.amp krpom. Ne koristite abrazivna sredstva za čišćenje ili rastvarače, jer mogu oštetiti završnu obradu ili električne komponente.
• Nema dijelova koje može servisirati korisnik: LED izvor svjetlosti je integriran i nije zamjenjiv. Ne pokušavajte otvarati ili popravljati uređaj.

Rješavanje problema

If you encounter issues with your downlight, refer to the following table:

Garancija

This Maxxima LED Downlight is covered by a 3 godine garancije from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Maxxima customer support.

Korisnička podrška

For technical assistance, troubleshooting, or warranty inquiries, please contact Maxxima customer support. Refer to the product packaging or the official Maxxima webstranicu za ažurne kontakt informacije.

Please have your model number (MRL-S40905) and date of purchase available when contacting support.