Sinotimer Digital Programmable Timer TM618N-2 User Manual

1. Proizvod je gotovview

The Sinotimer TM618N-2 is a versatile 7-day weekly digital programmable timer designed for automated control of electrical equipment. It allows users to set specific daily or weekly schedules for turning devices on and off, ensuring efficient energy management and convenience. This timer is suitable for a wide range of applications, including controlling lighting, heating, ventilation, and other electrical appliances.

Slika 1: Prednja strana view of the Sinotimer TM618N-2 Digital Timer, showing the display and control buttons.

2. Ključne karakteristike

• Sedmično programabilno: Allows up to 16 ON/OFF programs per day or week.
• Višenamjenski: Includes Clock display, Timer, Countdown, Automatic weekly time deviation correction, and Sleep mode.
• Veliki kapacitet: Podržava 16 Amp / 220 Volt AC loads.
• Wide Voltage Kompatibilnost: Operates with 220V, 230V, 240V AC.
• Ugrađena baterija: Zadržava postavke tokom isključivanjatages (Lithium battery type).
• Svestrane primjene: Ideal for controlling dryers, defrosting equipment, swimming pool pumps, gates, lighting, and more.

3. Specifikacije

4. Instalacija

Važna sigurnosna napomena: Installation should only be performed by a qualified electrician. Ensure power is disconnected before attempting any wiring.

1. Montaža: The TM618N-2 is designed for DIN rail mounting or screw mounting. Secure the timer in a suitable electrical enclosure.
2. Ožičenje: Refer to the wiring diagram on the back of the unit.
   

   Slika 2: Natrag view of the Sinotimer TM618N-2, showing input/output terminals and wiring diagram.

   • Input (Terminals 1 & 2): Connect your 200-250VAC power supply to these terminals.
   • Output (Terminals 3, 4, & 5):
     • Terminal 3: Common (COM)
     • Terminal 4: Normally Open (NO) - Connect your load here for switched power.
     • Terminal 5: Normally Closed (NC) - (Less commonly used for timer applications, but available).
3. Uključeno: Once wiring is complete and secure, restore power to the circuit. The timer display should illuminate.

Figure 3: Technical drawing showing the dimensions of the Sinotimer TM618N-2 timer.

5. Uputstvo za upotrebu

5.1. Funkcije gumba

• SAT: Koristi se za podešavanje trenutnog vremena i dana.
• PROG: Enters/exits programming mode for ON/OFF schedules.
• SEDMICA: Selects the day(s) of the week during time or program setting.
• SAT: Adjusts the hour during time or program setting.
• MIN: Adjusts the minute during time or program setting.
• PODSJEĆANJE: Recalls or cancels a program setting.
• PRIRUČNIK: Manually overrides the timer's current state (ON/AUTO/OFF).
• R (Resetovanje): Small button (requires a pointed object) to reset the timer to factory defaults.

5.2. Podešavanje trenutnog vremena i dana

1. Pritisnite i držite CLOCK dugme.
2. Dok drži CLOCK, pritisnite WEEK to set the current day (MO, TU, WE, TH, FR, SA, SU).
3. Dok drži CLOCK, pritisnite HOUR da podesite trenutni sat.
4. Dok drži CLOCK, pritisnite MIN za postavljanje trenutne minute.
5. Otpustite CLOCK tipku za spremanje postavki.

5.3. Programiranje rasporeda uključivanja/isključivanja

The timer supports up to 16 ON and 16 OFF programs. Each program can be set for a specific day or group of days.

1. Pritisnite PROG dugme jednom. Na ekranu će se prikazati "1 UKLJUČENO".
2. Pritisnite WEEK repeatedly to select the desired day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU; MO-FR; SA-SU; MO-SA; etc.).
3. Pritisnite HOUR da biste podesili željeni sat uključivanja.
4. Pritisnite MIN da biste podesili željeni minut UKLJUČIVANJA.
5. Pritisnite PROG ponovo. Na ekranu će se prikazati "1 ISKLJUČENO".
6. Repeat steps 2-4 to set the desired OFF time for the first program.
7. Pritisnite PROG to move to the next program ("2 ON", "2 OFF", etc.) and repeat the process for up to 16 programs.
8. Za izlazak iz moda programiranja i spremanje postavki, pritisnite CLOCK dugme.

5.4. Ručno prebacivanje

Pritisnite MANUAL dugme za ciklično prebacivanje između izlaznih režima:

• ON: Izlaz je stalno UKLJUČEN, ignorišući programe.
• AUTOMATSKI: Output follows the programmed schedules.
• ISKLJUČENO: Izlaz je stalno ISKLJUČEN, ignorišući programe.

Provjerite je li tajmer uključen AUTO mode for programmed operation.

5.5. Resetiranje tajmera

To clear all settings and return the timer to its factory default state, insert a pointed object (like a paperclip) into the small R (Reset) hole and press gently.

6. Održavanje

The Sinotimer TM618N-2 requires minimal maintenance.

• Uređaj održavajte čistim i bez prašine. Za čišćenje koristite meku, suhu krpu.
• Nemojte koristiti abrazivna sredstva za čišćenje ili rastvarače.
• Ensure the timer is installed in a dry environment, away from direct moisture or extreme temperatures.
• The internal battery is designed for long life and is not user-replaceable. If the display goes blank or settings are not retained after a power outage, the battery may need professional service.

7. Otkrivanje problema

8. Garancija i podrška

Za informacije o garanciji i tehničkoj podršci, molimo pogledajte dokumentaciju koja je priložena uz kupovinu ili se obratite prodavaču. Sačuvajte dokaz o kupovini za potrebe reklamacije.

Manufacturer: Sinotimer