FLIPSKY dvostruki električni regulator brzine FSESC6.7 Korisnički priručnik

1. Uvod

This manual provides essential information for the proper installation, operation, and maintenance of your FLIPSKY Dual Electric Speed Controller FSESC6.7. This controller is designed for electric skateboards, e-bikes, scooters, robots, and similar applications, offering precise motor control and robust protection features. Please read this manual thoroughly before use to ensure optimal performance and safety.

2. Značajke proizvoda

• Višestruki načini upravljanja: Supports Current, Dutycycle, Speed, and Position control modes for versatile application.
• Advanced Firmware: Utilizes the latest firmware version, offering rich control interface and sensor support.
• Balancing Car Functionality: Supports balancing car applications by connecting an IMU module via the IIC interface. Compatible IMU modules include MPU9250, MPU9150, MPU6050, LSM6DS3, and BMI160.
• Robust Power Handling: Features a continuous current of 140A and an instantaneous current of 400A.
• Wide Voltage Raspon: Operates within a voltage range of 14V-60V (4-13S cells), safely supporting 4S to 12S battery configurations. Note: Voltage spikes must not exceed 60V.
• Kompaktan dizajn: Dimensions of 79.8mm x 66.8mm x 17.8mm make it suitable for various installations.

3. Specifikacije

Note: It is recommended to keep firmware 5.2 from factory shipment. New firmware upgrades may potentially damage the ESC.

4. Podešavanje i ožičenje

Proper wiring is crucial for the safe and effective operation of the FLIPSKY Dual Electric Speed Controller. Refer to the diagrams below for connection details.

Slika 4.1: Top view of the FLIPSKY Dual Electric Speed Controller FSESC6.7, showing the main board, capacitors, and connected motor and power wires. This image provides a general overview of the component layout.

Slika 4.2: Dno view of the FLIPSKY Dual Electric Speed Controller FSESC6.7, illustrating the integrated aluminum anodized heat sink designed for efficient thermal management.

Slika 4.3: Physical dimensions of the FLIPSKY Dual Electric Speed Controller FSESC6.7, indicating a length of 79.8mm, a width of 66.8mm, and a height of 17.8mm. These measurements are important for installation planning.

4.1. Veza je završenaview

The controller features various ports for power, motor connections, and communication with external devices. Ensure all connections are secure and correctly oriented.

Slika 4.4: Comprehensive wiring diagram illustrating the connection points for the battery, two motors, and a receiver. Numbered labels correspond to specific ports on the ESC.

Slika 4.5: Detailed pinout diagram for the various communication and sensor ports on the FSESC6.7. This includes pin assignments for SWD (1, 6), COMM (2, 7), CAN (3, 8), USB (4, 9), and SENSE (5, 10) interfaces.

4.2. Connection Points

• Povezivanje baterije: Connect your battery pack (4-13S, 14V-60V) to the main power cables (14AWG with XT90 connector). Ensure correct polarity.
• Priključci motora: Connect the two motors to the designated motor wire outputs (12AWG).
• Veza sa prijemnikom: Connect your PPM receiver to the appropriate input port for control signals.
• USB port: Use the USB port for configuration and firmware updates (if applicable).
• CAN sabirnica: For multi-ESC setups or communication with other CAN-enabled devices.
• UART, SPI, IIC: These ports support various sensors and communication protocols, including IMU modules for balancing applications.

5. Uputstvo za upotrebu

The FLIPSKY FSESC6.7 offers flexible control options and is programmable to suit various motor types and application requirements.

5.1. Kontrolni režimi

The controller supports four primary control modes:

• Trenutna kontrola: Regulates the motor current.
• Dutycycle Control: Controls the motor speed based on the PWM duty cycle.
• Kontrola brzine: Maintains a desired motor RPM.
• Position Control: Controls the motor to a specific angular position.

5.2. Firmver i konfiguracija

The ESC is programmable, allowing for customization of parameters. It is strongly recommended to maintain the factory-shipped firmware version 5.2. Upgrading to newer firmware versions carries a risk of damaging the ESC. Consult official FLIPSKY resources for any firmware-related guidance.

6. Održavanje

To ensure the longevity and reliable performance of your FLIPSKY Dual Electric Speed Controller, follow these general maintenance guidelines:

• Održavajte čistim i suvim: Regularly inspect the ESC for dust, dirt, or moisture. Clean with a soft, dry brush or compressed air. Avoid exposure to water or high humidity.
• Pregledajte veze: Periodically check all wiring connections for looseness, corrosion, or damage. Secure any loose connections.
• Upravljanje toplinom: Ensure adequate airflow around the heat sink, especially during operation. Avoid obstructing the heat sink.
• Izbjegnite fizička oštećenja: Protect the ESC from impacts or excessive vibrations.

7. Otkrivanje problema

The FLIPSKY FSESC6.7 incorporates several protection functions to safeguard the unit and connected components. Understanding these can help in diagnosing issues.

7.1. Funkcije zaštite

• Low Voltage Zaštita: Activates if the battery voltage drops below a safe threshold, preventing over-discharge.
• Visok voltage Zaštita: Engages if the input voltage exceeds the maximum limit (60V), protecting against over-voltage.
• Zaštita od prekomjerne struje: Limits current flow to prevent damage from excessive load.
• Temperature Abnormality Protection: Monitors internal temperature and reduces power or shuts down if temperatures become critical.
• MOSFETs Over-Temperature Protection: Specifically protects the MOSFETs from overheating.

7.2. General Troubleshooting Steps

• Nema napajanja: Check battery connections, battery charge level, and main power switch.
• Motor ne reaguje: Verify motor connections, sensor connections (if applicable), and receiver signal. Check ESC configuration for correct motor type and control mode.
• Intermitentni rad: Inspect all wiring for loose connections or damage. Check for signs of overheating.
• Error Codes/LED Indicators: Refer to the FLIPSKY software documentation for specific error codes or LED blink patterns, if available.

8. Informacije o garanciji

The FLIPSKY Dual Electric Speed Controller FSESC6.7 comes with a warranty period of 2 months or more. Please retain your proof of purchase for warranty claims. The warranty typically covers manufacturing defects but may not cover damage resulting from improper installation, misuse, unauthorized modifications, or firmware upgrades not explicitly recommended by the manufacturer.

9. Podrška

For technical assistance, product inquiries, or warranty support, please contact FLIPSKY customer service. Our support team is available to help resolve any issues you may encounter with your product.

Kontakt informacije: Please refer to the official FLIPSKY webnajnovije kontakt podatke potražite na web stranici ili u dokumentaciji o kupovini.