Touch TCH-23104

TOUCH TCH-23104 Uputstvo za upotrebu za klizače za fioke sa sporim zatvaranjem, montirane ispod nje

1. Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your TOUCH TCH-23104 Undermount Soft-Close Drawer Slides. These slides are designed for concealed installation beneath the drawer, offering a clean aesthetic and smooth, silent operation. Each pair supports up to 75 lbs and features a 3D adjustable lock device for precise drawer alignment.

TOUCH Undermount Soft-Close Drawer Slides and components

Slika 1.1: Gotovoview of TOUCH Undermount Soft-Close Drawer Slides and included components.

2. Šta se nalazi u kutiji

Molimo Vas da provjerite da li su sve komponente prisutne prije početka instalacije:

  • Undermount Drawer Slides (5 pairs for a 5-pack)
  • Lock Devices (10 units for a 5-pack)
  • Vijci za montažu (različite veličine)
  • Uputstvo za upotrebu (ovaj dokument)
Contents of the TOUCH Undermount Drawer Slides package

Image 2.1: Visual representation of the package contents, including slides, lock devices, screws, and manual.

3. Specifikacije

  • Broj modela: TCH-23104
  • Vrsta montaže: Undermount
  • dužina: 21 inča (533 mm)
  • Kapacitet težine: 75 funte
  • Materijal: Alloy Steel (Galvanized finish)
  • Karakteristike: Self-Soft Close, 3D Adjustable Lock Device
  • Kompatibilnost: Fits 1/2" to 5/8" drawer side panel thickness

For detailed dimensions and mounting hole distances, refer to the table below:

Table of specifications for TOUCH drawer slides, including lengths, extension, cabinet depth, and mounting hole distances

Image 3.1: Detailed specifications table for various slide lengths, including cabinet depth and mounting hole measurements.

4. Postavljanje i instalacija

4.1. Razmatranja prije instalacije

Accurate measurements are crucial for optimal performance. Please review sljedeće:

  • Drawer Width: The inside drawer width must equal the cabinet opening width minus 1-5/8 inches (41.3mm) for proper alignment and function.
  • Drawer Side Panel Thickness: These slides are compatible with drawer side panels between 1/2 inch (12.7mm) and 5/8 inch (15.9mm) thick.
  • Vrsta ormara: For face frame cabinet applications, rear mounting sockets are required and sold separately. They are not required for frameless cabinets.
Diagram showing critical drawer and cabinet dimensions for undermount slide installation

Image 4.1: Important dimensional guidelines for drawer and cabinet preparation, including clearances and side panel thickness.

Illustration of face frame and frameless cabinet applications for drawer slides

Image 4.2: Comparison of face frame and frameless cabinet types, indicating when rear mounting sockets are necessary.

4.2. Koraci instalacije

  1. Pripremite kabinet: Ensure the cabinet opening is clean and clear. Mark the desired height for the drawer slides inside the cabinet.
  2. Install Cabinet Slides: Attach the cabinet portion of the slides to the cabinet sides using the provided screws. It is recommended to pre-drill pilot holes to prevent screw stripping. Initially, secure with one screw at the front, leaving the rear loose for adjustment.
  3. Prepare the Drawer: Attach the lock devices to the underside of the drawer box, ensuring they are correctly oriented.
  4. Umetnite ladicu: Carefully align the drawer with the cabinet slides and push it in until the lock devices engage with the slides.
  5. Prilagodite i osigurajte: With the drawer inserted, test its movement. Adjust the position of the cabinet slides as needed to achieve smooth operation. Once optimal movement is achieved, fully secure all screws, including the rear mounting points.
  6. Fine-Tune with 3D Adjustment: Use the 3D adjustable lock device (refer to Section 5.2) to make minor adjustments to the drawer front's height, tilt, and side-to-side alignment.

5. Operating the Drawer Slides

5.1. Soft-Close Functionality

The TOUCH TCH-23104 drawer slides feature an integrated soft-close mechanism. This system ensures that the drawer closes gently and silently, preventing slamming and extending the lifespan of your cabinetry. Simply push the drawer towards the closed position, and the mechanism will engage to complete the closing action smoothly.

5.2. 3D Adjustable Lock Device

The 3D adjustable lock device allows for precise alignment of the drawer front after installation. This mechanism provides adjustments for height, front panel tilt, and left-to-right positioning, ensuring a perfect fit and consistent gaps between drawer fronts.

Diagram illustrating the features of the 3D adjustable lock device and soft-closing mechanism

Slika 5.1: Krupni plan view of the 3D lock device, highlighting height, tilt, and lateral adjustment points, along with the soft-closing mechanism.

View of an installed drawer with undermount slides and lock devices visible

Image 5.2: An installed drawer demonstrating the concealed nature of the undermount slides.

6. Održavanje

The TOUCH TCH-23104 drawer slides are designed for durability and require minimal maintenance. To ensure continued smooth operation:

  • čišćenje: Periodically wipe down the visible parts of the slides with a clean, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.
  • podmazivanje: The slides are pre-lubricated and generally do not require additional lubrication. If movement becomes stiff over time, a small amount of silicone-based lubricant can be applied to the moving parts, avoiding excessive application.
  • inspekcija: Occasionally check all mounting screws to ensure they are tight. Re-tighten if necessary.

7. Otkrivanje problema

  • Drawer does not close smoothly or jams:
    • Check for obstructions in the slide mechanism or drawer path.
    • Verify that the drawer and cabinet slides are properly aligned. Use the 3D adjustable lock device for fine-tuning.
    • Ensure all mounting screws are securely fastened. Loose screws can cause misalignment.
  • Soft-close mechanism is not engaging:
    • Confirm that the drawer is fully engaging with the soft-close mechanism at the end of its travel. Adjust alignment if needed.
    • Check for any debris obstructing the soft-close piston.
  • Screws stripping during installation:
    • Always pre-drill pilot holes before driving screws into wood. The pilot hole should be slightly smaller than the screw's diameter.
    • Use appropriate screwdriver bits and apply steady pressure.
  • Drawer front is not level or flush:
    • Utilize the 3D adjustable lock device to correct height, tilt, and side-to-side positioning of the drawer front.
  • Plastic components (e.g., rear mounts) breaking:
    • Ensure the drawer is not overloaded beyond the 75 lb capacity.
    • Verify correct installation and alignment to prevent undue stress on plastic parts.
    • Contact customer support for replacement parts if necessary.

8. Garancija i podrška

For any questions, suggestions, or assistance with your TOUCH Undermount Drawer Slides, please contact TOUCH Cabinets Hardware customer support. We are committed to providing high-quality products and support to ensure your satisfaction.

Proizvođač: TOUCH Cabinets Hardware

Kontakt: Refer to your purchase documentation or the seller's information for direct contact methods.

Povezani dokumenti - TCH-23104

Preview Vadania VF1245 Klizači za ladice na guranje - Uputstvo i specifikacije
Sveobuhvatni vodič za Vadania VF1245 klizne ladice koje se otvaraju pritiskom, uključujući detaljne specifikacije, karakteristike proizvoda, upute za ugradnju i savjete za odabir veličine. Saznajte više o materijalu, nosivosti, dimenzijama i pravilnoj ugradnji.
Preview Fusion Climb 1015 EN 12277 UIAA pojas: Uputstvo za upotrebu i sigurnosni vodič
Sveobuhvatni korisnički priručnik i sigurnosni vodič za Fusion Climb 1015 EN 12277 UIAA pojaseve. Uključuje upute, upozorenja, upute za njegu, održavanje i specifikacije proizvoda.
Preview Bertazzoni REF24BMBPNB 24-Inch Integrated Refrigerator Freezer - Specifications & Features
Detailed information on the Bertazzoni REF24BMBPNB, a 24-inch integrated panel-ready refrigerator and freezer with a bottom mount design, featuring Energy Star certification, No-Frost system, and precise temperature control for optimal food preservation.
Preview GeekTale K02 Smart Lock korisnički priručnik
Sveobuhvatno korisničko uputstvo za GeekTale K02 pametnu bravu, koje obuhvata instalaciju, funkcije, integraciju aplikacija i rješavanje problema. Saznajte kako postaviti pametnu bravu za poboljšanu sigurnost doma.
Preview Rulart D Series Deadbolt Electronic Intelligent Lock User Manual
Comprehensive user manual for the Rulart D Series Deadbolt Electronic Intelligent Lock (Model D8), detailing product features, installation, setup, technical specifications, and remote operation via the Tuyasmart app.
Preview EPIC SYSTEMS ES-303G Brava za staklena vrata s automatskim prepoznavanjem - Korisnički priručnik
Sveobuhvatno korisničko uputstvo za pametnu bravu na vratima EPIC SYSTEMS ES-303G, koje obuhvata instalaciju, registraciju PIN-a i RFID kartice, načine rada, sigurnosne funkcije, funkcije alarma i tehničke specifikacije.