1. Uvod
The Meliconi AC 200 is a universal remote control designed for domestic air conditioners, offering broad compatibility with most brands. It provides control over essential functions and features a large, backlit screen for ease of use in various lighting conditions, including darkness. This manual will guide you through the proper setup, operation, and maintenance of your AC 200 remote control to ensure optimal performance.
Key features include a permanent memory that retains code settings, a built-in LED torch, and quick settings for both cooling and heating modes.
2. Podešavanje
2.1. Instalacija baterije
The Meliconi AC 200 requires two 1.5V AAA/LR03 alkaline batteries (not included). To install the batteries:
- Otvorite poklopac pretinca za baterije koji se nalazi na stražnjoj strani daljinskog upravljača.
- Insert two AAA batteries, ensuring correct polarity (+ and - terminals match the indicators inside the compartment).
- Čvrsto zatvorite poklopac odeljka za baterije.
2.2. Programiranje daljinskog upravljača
The AC 200 can be programmed to control your air conditioner using either an automatic search function or by manually entering a code. The remote control features permanent memory, so the code will not be lost when batteries are removed or replaced.
Funkcija automatskog pretraživanja:
- Ensure your air conditioner is powered on.
- Point the AC 200 remote control towards the air conditioner.
- Pritisnite i držite SET button until the code search indicator appears on the remote's display. The remote will begin transmitting codes.
- When your air conditioner responds (e.g., turns off, changes mode), immediately release the SET button. The code is now stored.
- Test all primary functions to ensure correct operation. If not all functions work, repeat the process to find an alternative code.
Manual Code Entry:
- Identify your air conditioner brand from the compatibility list provided in the manual or on the Meliconi website.
- Locate the corresponding code(s) for your brand.
- Pritisnite i držite SET button until the code entry mode is activated on the display.
- Use the temperature up/down buttons to enter the 3-digit code.
- Pritisnite OK or SET button to confirm the code.
- Test all primary functions. If not all functions work, try the next code listed for your brand.
For a complete and updated list of compatible brands and codes, please visit the official Meliconi webstranica: www.meliconi.com/ac200.
3. Operacija
3.1. Funkcije gumba
The Meliconi AC 200 remote control features clearly labeled buttons for intuitive operation:
- Power Button (Green): Turns the air conditioner On or Off.
- Dugme MODE: Ciklično se kreće kroz načine rada (npr. Hlađenje, Grijanje, Ventilator, Sušenje, Automatski).
- TEMP Buttons (Orange Up/Down Arrows): Podešava željenu temperaturu.
- Dugme za brzinu ventilatora: Podešava brzinu ventilatora (npr. Niska, Srednja, Visoka, Automatska).
- Swing Button: Controls the air deflector movement.
- TIME ON / TIME OFF Buttons: Sets the timer for automatic power-on or power-off.
- FAST COOL / FAST HEAT Buttons: Activates quick cooling or heating modes.
- LED Torch Button (Light Bulb Icon): Activates the built-in LED torch.
- C/F dugme: Toggles between Celsius and Fahrenheit temperature display.
- SET dugme: Used for programming the remote control.
3.2. Prikaz na ekranu
The large, backlit LCD screen displays current settings and status indicators:
- Prikaz temperature: Shows the set temperature in Celsius or Fahrenheit.
- Ikone načina rada: Indicates the current operating mode (e.g., snowflake for cool, sun for heat, fan icon for fan mode).
- Indikator brzine ventilatora: Displays the selected fan speed.
- Tajmer ON/OFF: Shows active timer settings.
- Indikator baterije: Alerts when batteries are low.
4. Održavanje
4.1. Zamjena baterije
When the battery indicator appears on the display or the remote's performance diminishes, replace the batteries. Follow the battery installation steps in Section 2.1. The permanent memory feature ensures that your programmed code will not be lost during battery replacement.
4.2. Čišćenje
Za čišćenje daljinskog upravljača:
- Obrišite površinu mekom, suhom krpom.
- Do not use abrasive cleaners, solvents, or chemical agents, as these can damage the remote's finish or internal components.
- Avoid exposing the remote to excessive moisture.
5. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Daljinski upravljač ne reaguje. | Slabe ili prazne baterije; nepravilna ugradnja baterija. | Zamijenite baterije novim AAA alkalnim baterijama, pazeći na ispravan polaritet. |
| Klima uređaj ne reaguje na komande. | Incorrect code programmed; remote not pointed at AC unit. | Ensure the remote is pointed directly at the air conditioner's receiver. Re-program the remote using the automatic search or manual code entry (Section 2.2). Try alternative codes for your brand. |
| Neke funkcije ne rade. | Code partially compatible; specific function not supported by AC model. | Try another code for your air conditioner brand. Some advanced functions may not be universally supported by all AC models. |
| Ekran je taman ili treperi. | Niske baterije. | Zamijenite baterije. |
6. Specifikacije
- Brand: Meliconi
- Naziv modela: AC 200
- Broj modela: 802102
- Dimenzije: 11 x 18.5 x 3 cm
- Težina: 120 grama
- baterije: 2 x AAA/LR03 (not included)
- Kompatibilni periferni uređaji: Klima uređaj
- Posebne karakteristike: Universal compatibility, Backlit screen, LED torch, Permanent memory
- Maksimalni domet: 10 metara
- Boja: Bijelo
7. Garancija i podrška
The Meliconi AC 200 Universal Air Conditioner Remote Control typically comes with a 2-year warranty from the date of purchase. For detailed warranty terms, conditions, and to register your product, please refer to the documentation included in the product packaging or visit the official Meliconi website.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Meliconi customer service through their official webweb-mjesto ili kontakt informacije navedene na pakovanju vašeg proizvoda.
