AZZA CSAZ-280B Spectra Black ATX Mid Tower Gaming kućište Korisnički priručnik

1. Proizvod je gotovview

The AZZA CSAZ-280B Spectra Black is an ATX Mid Tower gaming case designed to house various computer components. It features a tempered glass side panel and a steel right panel. This manual provides instructions for the proper installation and maintenance of your computer components within this case.

Slika 1.1: Naprijed lijevo view of the AZZA CSAZ-280B Spectra Black case, showcasing the tempered glass side panel and the front panel design with integrated RGB lighting.

Ključne karakteristike:

• Left Panel: Tempered glass with rubber mounts for secure installation.
• Right Panel: Solid steel panel.
• Motherboard Compatibility: Supports ATX, Micro-ATX, and ITX motherboards.
• Drive Bays: Up to three 2.5" drive bays and up to two 3.5" drive bays.
• Maximum CPU Cooler Height: Up to 170 mm.
• Maximum Video Card Length: Up to 290 mm.

2. Podešavanje i instalacija komponenti

Follow these steps for proper installation of your computer components into the AZZA CSAZ-280B case. Ensure the system is powered off and unplugged before beginning any installation.

2.1 Front I/O Panel Connections

The top panel of the case features various input/output ports and controls for convenient access.

Slika 2.1: Od vrha prema dolje view of the case's front I/O panel, indicating the Power button, LED control button, Audio jacks (Mic and Headphone), two USB 2.0 ports, and one USB 3.0 port.

• Dugme za napajanje: Press to power on or off the system.
• LED dugme: Controls the RGB lighting effects of the case.
• Audio priključci: Separate ports for microphone and headphones.
• USB 2.0 portovi: Two ports for connecting USB 2.0 devices.
• USB 3.0 port: One port for connecting USB 3.0 devices, offering faster data transfer speeds.

2.2 Instalacija pogona

The case supports both 3.5" HDDs and 2.5" SSDs. Refer to the images below for drive bay locations.

Slika 2.2: Unutrašnje view showing the lower drive cage, capable of holding one 3.5" HDD or one 2.5" SSD, and an additional dedicated 3.5" HDD bay.

Slika 2.3: Unutrašnje view showing two dedicated 2.5" SSD mounting brackets located behind the motherboard tray.

1. For 3.5" HDDs: Install drives into the designated 3.5" drive cage located at the bottom front of the case. Secure with screws.
2. For 2.5" SSDs: Install drives into the dedicated 2.5" mounting brackets behind the motherboard tray or in the lower drive cage. Secure with screws.

2.3 Instalacija grafičke kartice

Kućište podržava grafičke kartice dužine do 290 mm.

Slika 2.4: Unutrašnje view illustrating the maximum supported length for a video card, which is 290mm.

1. Uklonite potrebne poklopce PCI-E utora sa stražnje strane kućišta.
2. Carefully insert the graphics card into the PCI-E slot on your motherboard.
3. Pričvrstite grafičku karticu na kućište vijcima.

2.4 Ugradnja ventilatora i protok zraka

Proper fan placement ensures optimal cooling performance. The case supports various fan configurations:

• Prednji dio: Supports 3 x 120mm fans or 2 x 140mm fans.
• Vrh: Podržava 2 x 120 mm ventilatora.
• pozadi: Supports 1 x 120mm fan.

Slika 2.5: Unutrašnje view of the front panel, highlighting the mounting locations for up to three 120mm fans or two 140mm fans.

Slika 2.6: Unutrašnje view of the top panel, showing the mounting locations for up to two 120mm fans.

Slika 2.7: Unutrašnje view of the rear panel, indicating the mounting location for one 120mm fan.

1. Identify the desired fan mounting locations (front, top, rear).
2. Secure fans to the case using appropriate fan screws.
3. Spojite kablove za napajanje ventilatora na matičnu ploču ili kontroler ventilatora.

2.5 Instalacija napajanja

The power supply unit (PSU) mounts at the bottom of the case.

1. Slide the PSU into the designated compartment at the bottom rear of the case.
2. Pričvrstite napajanje na kućište pomoću vijaka sa stražnje strane.
3. Route power cables through the cable management cutouts to reach your components.

3. Uputstvo za upotrebu

3.1 Uključivanje/isključivanje napajanja

To power on your system, press the power button located on the top I/O panel. To power off, either shut down through your operating system or press and hold the power button for several seconds.

3.2 LED kontrola

Use the dedicated LED button on the top I/O panel to cycle through various lighting modes and colors for the integrated RGB elements of the case.

4. Održavanje

Redovno održavanje pomaže u osiguravanju optimalnih performansi i dugotrajnosti komponenti vašeg računara.

• Čišćenje prašine: Povremeno čistite filtere za prašinu i unutrašnje komponente komprimiranim zrakom. Prije čišćenja provjerite je li sistem isključen iz struje i iskopčan iz struje.
• Upravljanje kablovima: Ensure cables are neatly routed to prevent obstruction of airflow and to maintain a clean interior.
• Njega panela: Clean the tempered glass panel with a soft, lint-free cloth and a mild glass cleaner. Avoid abrasive materials.

5. Otkrivanje problema

Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti.

• Sistem se ne uključuje:
  • Verify all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected to the motherboard and components.
  • Provjerite je li prekidač za napajanje u položaju 'UKLJUČENO'.
  • Provjerite je li kabel dugmeta za napajanje na prednjoj ploči ispravno spojen na priključak na prednjoj ploči matične ploče.
• Fans Not Spinning / LEDs Not Lighting Up:
  • Confirm fan power cables are properly connected to the motherboard or fan controller.
  • Ensure LED cables are correctly connected to the motherboard's RGB header or the case's LED controller.
  • Press the LED button on the top I/O panel to cycle through modes or turn on the lighting.
• USB portovi ne rade:
  • Check that the USB 2.0 and USB 3.0 headers from the front panel are correctly plugged into the corresponding ports on your motherboard.
• Audio priključci ne rade:
  • Ensure the HD Audio cable from the front panel is securely connected to the HD Audio header on your motherboard.

6. Specifikacije

Detailed technical specifications for the AZZA CSAZ-280B Spectra Black case.

7. Garancija i podrška

7.1 Politika povrata

Ovaj proizvod podliježe politici povrata u roku od 30 dana za povrat novca ili zamjenu, u skladu s uvjetima prodavača.

7.2 Tehnička podrška

For technical assistance or inquiries regarding your AZZA product, please visit the official AZZA website or contact their customer support channels. You can find more information and contact details by visiting the AZZA Store on Amazon.