1. Važne informacije o sigurnosti
Please read this manual thoroughly before installation and operation. Keep this manual in a safe place for future reference.
- This device is designed to detect both smoke and carbon monoxide.
- Installation should be performed by a qualified electrician if you are not familiar with electrical wiring.
- Do not paint the device. Paint can clog the openings and interfere with sensor operation.
- Testirajte alarm svake sedmice kako biste osigurali ispravan rad.
- Replace the 9V backup battery annually, or when the low battery warning sounds.
2. Proizvod je gotovview
The X-Sense XP04 is a hardwired combination smoke and carbon monoxide detector designed for comprehensive home safety. It features advanced photoelectric smoke and electrochemical CO sensors for accurate detection.
This detector is AC powered and includes a replaceable 9V battery backup, ensuring continuous monitoring even during power outages. It can be interconnected with up to 18 compatible X-Sense hardwired alarms, providing full coverage throughout your home.
Product Overview Video
Ovaj video pruža vizuelni pregledview of the X-Sense XP04 Hardwired Combination Detector, demonstrating its features and components.
3. Postavljanje i instalacija
The X-Sense XP04 detector is designed for easy installation. All necessary mounting hardware is included.
Koraci instalacije:
- Pripremite mjesto za montažu: Ensure the power is off at the circuit breaker before beginning installation. Select a location in accordance with local codes and the provided guidelines.
- Instalirajte nosač za montažu: Secure the mounting bracket to the ceiling or wall using the provided screws and anchor plugs.
- Povežite ožičenje: Connect the AC hardwired cables (black, white, red) to your household wiring. The red wire is for interconnection with other compatible alarms.
- Install Battery Backup: Insert the 9V backup battery into the battery compartment.
- Attach Detector: Poravnajte detektor s nosačem za montažu i okrenite ga u smjeru kazaljke na satu dok se sigurno ne zaključa na svoje mjesto.
- Vrati snagu: Turn on the power at the circuit breaker. The detector will perform a self-test.
Interconnection for Full Coverage
This detector supports interconnection with up to 18 X-Sense 2-in-1 hardwired alarms. When one interconnected alarm is triggered, all connected alarms will sound simultaneously, providing early warning throughout your home.
4. Uputstvo za upotrebu
Status LED indikatora:
- Zelena LED: Označava normalan rad i napajanje izmjeničnom strujom.
- Žuta LED dioda: Označava kvar ili slabo stanje baterije.
- Crveni LED: Indicates an alarm (smoke or carbon monoxide detected).
Testiranje alarma:
Press and hold the 'Test/Silence' button located on the center of the detector. The alarm will sound, and the LED indicator will flash. Release the button to stop the test. Test the alarm weekly.
Utišavanje alarma:
In case of a non-emergency alarm (e.g., cooking fumes), press the 'Test/Silence' button to temporarily silence the alarm. The alarm will automatically reset after a few minutes if the air clears. If the hazard persists, the alarm will reactivate.
5. Održavanje
Zamjena baterije:
The 9V backup battery should be replaced annually. When the battery is low, the detector will chirp and the yellow LED will flash. To replace the battery:
- Okrenite detektor u smjeru suprotnom od kazaljke na satu da biste ga uklonili iz nosača za montažu.
- Otvorite odeljak za baterije.
- Remove the old 9V battery and insert a new one, ensuring correct polarity.
- Close the battery compartment and reattach the detector to the mounting bracket by twisting clockwise.
- Testirajte alarm nakon zamjene baterije.
čišćenje:
Clean your detector at least once a month to remove dust and debris. Use a soft brush or a vacuum cleaner with a soft brush attachment to clean the vents and cover. Do not use water, cleaners, or solvents.
6. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Alarm chirps periodically (Yellow LED flashes) | Niska baterija | Replace the 9V backup battery. |
| Alarm sounds without apparent smoke/CO | Dust, high humidity, cooking fumes, or chemical vapors | Clean the detector, ventilate the area, or relocate if false alarms persist due to environmental factors. |
| Alarm se ne oglašava tokom testa | No power, faulty battery, or device malfunction | Check AC power, replace battery, or contact customer support if issues persist. |
| Red LED flashes, but no alarm sound | Faulty speaker or internal malfunction | Obratite se korisničkoj podršci za pomoć. |
7. Specifikacije
- Brand: X-Sense
- Model: XP04
- Izvor napajanja: AC (Hardwired) with 9V Battery Backup
- Dimenzije proizvoda: 5.5"D x 5.5"Š x 1.5"H
- Težina artikla: 4.58 funte (otprilike 2.08 kg)
- Jačina alarma: 85 dB na 10 stopa
- Tip senzora: Fotoelektrični (dim), elektrohemijski (ugljen-monoksid)
- Materijal: Polikarbonat
- interkonekcija: Up to 18 compatible X-Sense hardwired units
- Životni vijek: Do 10 godina
- Uključene komponente: 1 × User Manual, 2 × Screws and Anchor Plugs, 1 × 9 V Backup Battery, 1 × AC Hardwired Cable, 1 × Smoke and Carbon Monoxide Alarm XP04 (per unit in pack)
8. Garancija i podrška
X-Sense provides the following support for your XP04 detector:
- Garancija povrata novca: 60 dana
- Garancija kvaliteta: 5 godine
- tehnička podrška: Životni vijek
For technical assistance, warranty claims, or further information, please visit the official X-Sense webstranice ili kontaktirajte njihov odjel za korisničku podršku.
