Važne informacije o sigurnosti
Please read this instruction manual carefully before installing or operating your Brilliant Dody Outdoor Wall Light. Keep this manual for future reference. Improper installation or use can lead to electric shock, fire, or other hazards.
- Prije instalacije, održavanja ili zamjene sijalice provjerite je li napajanje isključeno.
- Instalaciju treba izvršiti kvalificirani električar ako niste sigurni u vezi električnih instalacija.
- This product is designed for outdoor use with an IP44 rating, providing protection against splashing water.
- Nemojte prekoračiti maksimalnu snagutage specificirano za sijalicu.
Sadržaj paketa
Prije početka instalacije provjerite da li su sve komponente prisutne:
- 1 x Brilliant Dody Outdoor Wall Light fixture
- Materijal za montažu (vijci, tiple za zid)
- Uputstvo za upotrebu
Napomena: The E27 bulb is not included and must be purchased separately.
Postavljanje i instalacija
- Pripremite prostor za instalaciju: Choose a suitable wall location for mounting. The recommended mounting height for optimal motion detection is 1.8 meters. Ensure the power supply to the installation area is switched off at the main circuit breaker.
- Označite tačke bušenja: Hold the light fixture against the wall at the desired mounting height. Mark the positions for the drilling holes using a pencil.
- Izbušite rupe: Izbušite rupe na označenim mjestima. Umetnite priložene tiple u izbušene rupe.
- Povežite ožičenje: Carefully connect the electrical wires from your mains supply to the terminal block inside the light fixture. Ensure correct polarity (Live, Neutral, Earth). If you are unsure, consult a qualified electrician.
- Montirajte uređaj: Secure the light fixture to the wall using the provided screws. Ensure it is firmly attached.
- Instalirajte žarulju: Insert an E27 bulb (max 20W, LED compatible) into the lamp holder. Ensure the bulb is securely screwed in.
Slika: Front view of the Brilliant Dody Outdoor Wall Light, showing its sleek black and white design. This image illustrates the overall appearance of the fixture before installation.
Image: Close-up of the top section of the Brilliant Dody Outdoor Wall Light, highlighting the white diffuser and black trim. This view helps in understanding the bulb housing area.
Uputstvo za upotrebu
The Brilliant Dody Outdoor Wall Light features an integrated motion detector for automatic operation. After installation, restore power to the fixture.
Motion Detector Settings:
The motion sensor has adjustable settings for 'TIME' and 'LUX'. These controls are typically located on the sensor unit itself.
Slika: Detaljna view of the motion sensor and its adjustment dials (TIME and LUX) on the Brilliant Dody Outdoor Wall Light. This image shows where to find and adjust the sensor settings.
- VRIJEME: This dial controls how long the light remains on after motion is detected and no further motion is sensed. Rotate the dial to increase or decrease the duration.
- LUX: This dial determines the ambient light level at which the sensor becomes active. Rotate towards the sun icon for the sensor to activate in brighter conditions (daytime), or towards the moon icon for it to activate only in darker conditions (nighttime).
Područje otkrivanja:
- Ugao detekcije: 120°
- Raspon detekcije: Up to 8 meters on both sides, with a maximum detection range of 10 meters.
- Optimalna visina montaže: 1.8 meters for best performance.
Održavanje
- čišćenje: To clean the fixture, ensure the power is off. Wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the stainless steel finish or plastic diffuser.
- Zamjena žarulje: Before replacing the bulb, ensure the power supply is disconnected. Allow the old bulb to cool down completely. Unscrew the old E27 bulb and replace it with a new E27 bulb (max 20W, LED compatible).
- inspekcija: Povremeno provjeravajte uređaj na bilo kakve znakove oštećenja, labavih spojeva ili istrošenosti.
Rješavanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Svjetlo se ne pali. | Nema napajanja. Neispravna sijalica. Incorrect LUX setting. | Proverite prekidač. Zamenite sijalicu. Adjust LUX dial towards the moon icon for darker conditions. |
| Svjetlo ostaje stalno uključeno. | Detektovano je stalno kretanje. Incorrect TIME setting. | Ensure no objects are constantly moving in the detection zone. Podesite brojčanik VREMENA na kraće trajanje. |
| Senzor pokreta ne detektuje. | Obstruction in detection path. Incorrect LUX setting. Sensor dirty. | Uklonite sve prepreke. Adjust LUX dial towards the sun icon for brighter conditions, or ensure it's not set too low for current ambient light. Clean the sensor lens gently. |
Specifikacije proizvoda
- Brand: Sjajno
- Broj modela: 1000134854
- ASIN: B0B11KYHSW
- Dimenzije (D x Š x V): 17 x 7.6 x 40 cm
- Težina: 490 grama
- Materijal: nerđajući čelik
- Materijal sjenila: Plastika
- Boja: Crna
- Vrsta žarulje: E27 (Sijalica nije uključena)
- Max Wattage: 20W (kompatibilno s LED diodama)
- Broj sijalica: \ t 1
- Izvor napajanja: Električni kabel
- Vrsta instalacije: Zidni nosač
- Posebna karakteristika: Detektor pokreta
- IP ocjena: IP44 (Zaštita od prskanja vode)
- Ugao detektora pokreta: 120°
- Domet detektora pokreta: Up to 8m (both sides), max 10m
- Optimalna visina montaže: 1.8m
Garancija i podrška
Information regarding specific warranty terms and customer support for Brilliant products may vary by region and retailer. Please refer to the documentation provided at the time of purchase or visit the official Brilliant webstranicu za detaljne informacije o garanciji i kontakte za podršku.
For technical assistance or inquiries, please contact Brilliant customer service through their official channels.
