Dasqua 1804-1055 2-u-1 laserski mjerni instrument - uputstvo za upotrebu

1. Uvod

This manual provides comprehensive instructions for the safe and effective use of your Dasqua 1804-1055 2-in-1 Laser Tape Measure. This device combines a traditional 5-meter tape measure with a 30-meter laser distance meter, featuring an OLED display for clear readings and USB charging capability. Please read this manual thoroughly before operating the device and retain it for future reference.

2. Sigurnosne informacije

UPOZORENJE: This product contains a Class 2 laser. Improper use can result in hazardous radiation exposure. Always adhere to the following safety guidelines:

• Ne gledajte direktno u laserski snop.
• Ne usmjeravajte lasersku zraku na ljude ili životinje.
• Izbjegavajte usmjeravanje laserskog snopa prema reflektirajućim površinama, jer reflektirani snopovi također mogu biti opasni.
• Do not disassemble or modify the device. Unauthorized modifications can lead to laser radiation exposure.
• Držite uređaj van domašaja djece.
• Koristite samo onako kako je opisano u ovom priručniku.
• Do not operate the device in explosive atmospheres or near flammable liquids or gases.

3. Proizvod je gotovview

3.1 Komponente i kontrole

Familiarize yourself with the main components and control buttons of your Dasqua 2-in-1 Laser Tape Measure.

Image: Diagram showing the Dasqua 1804-1055 device with labels for the OLED display, laser emission point, USB charging port, tape measure, lock button, and control buttons.

• OLED zaslon: Shows measurements, battery status, and operating modes.
• Merna traka: Traditional retractable steel tape for short-distance measurements (5m).
• Laser Emission Point: Where the laser beam exits the device.
• USB priključak za punjenje: Za punjenje interne baterije.
• Dugme za zaključavanje: Secures the tape measure in position.

3.2 kontrolna dugmeta

Slika: Krupni plan view of the control panel on the Dasqua 1804-1055, showing the FUNC/UNITS, +/-, DIST, and CLEAR/OFF buttons.

• FUNC/UNITS: Press to cycle through measurement functions (e.g., single, continuous) or to change measurement units (meters, feet, inches).
• +/-: Used for adding or subtracting measurements. Also used to set the measurement reference point (front or rear of the device).
• UDALJENOST: Activates the laser for measurement. Press once to turn on the laser, press again to take a measurement.
• CLEAR/OFF: Press once to clear the current measurement. Press and hold to power off the device.

4. Podešavanje

4.1 Punjenje uređaja

The Dasqua 1804-1055 is equipped with a built-in Li-ion 3.7V rechargeable battery. Before first use, ensure the device is fully charged.

Slika: Sa strane view of the Dasqua 1804-1055 showing the micro-USB charging port.

1. Pronađite USB priključak za punjenje sa strane uređaja.
2. Connect the provided USB cable to the device and to a standard USB power adapter (not included) or a computer USB port.
3. The OLED display will indicate charging status.
4. Nakon što se potpuno napuni, isključite USB kabel.

A full charge provides approximately 2000 measurements.

4.2 Uključivanje/isključivanje

• Za uključivanje: Pritisnite DIST dugme ili CLEAR/OFF dugme.
• Za isključivanje: Pritisnite i držite CLEAR/OFF button for a few seconds. The device will also automatically power off after 90 seconds of inactivity to conserve battery. The laser itself turns off after 30 seconds of inactivity.

5. Uputstvo za upotrebu

5.1 Using the Tape Measure

The integrated 5-meter tape measure functions like a standard tape measure.

Slika: Krupni plan view of the 2.5cm wide tape measure extending from the Dasqua 1804-1055 device, showing metric markings.

1. Pull the tape blade out to the desired length.
2. To lock the tape in place, slide the lock button forward.
3. To retract the tape, slide the lock button backward and gently guide the tape back into the housing.

5.2 Using the Laser Measure

The laser measure provides quick and accurate digital distance measurements up to 30 meters.

Image: The Dasqua 1804-1055 device with a visible red laser beam extending from its front, indicating active laser measurement.

Jednostruko mjerenje udaljenosti

1. Uključite uređaj.
2. Point the laser emission point towards the target.
3. Pritisnite DIST button once to activate the laser. A red laser dot will appear on the target.
4. Pritisnite DIST button again to take the measurement. The distance will be displayed on the OLED screen.

Kontinuirano mjerenje (praćenje)

1. Uključite uređaj.
2. Pritisnite FUNKCIJE/JEDINICE button until the continuous measurement icon (often a moving line or similar) appears on the display.
3. Pritisnite DIST button once to start continuous measurement. The display will update in real-time as you move the device.
4. Pritisnite DIST button again to stop continuous measurement and hold the last reading.

Promjena mjernih jedinica

To switch between meters (m), feet (ft), and inches (in):

• Pritisnite FUNKCIJE/JEDINICE pritiskajte dugme dok se ne prikaže željena jedinica.

Postavljanje referentne tačke mjerenja

The device can measure from its front edge or its rear edge. This is typically indicated by an icon on the display.

• Pritisnite +/- button to toggle between front-edge and rear-edge measurement reference.

Addition and Subtraction of Measurements

The device supports basic arithmetic operations for measurements.

1. Take the first measurement using the DIST dugme.
2. Pritisnite +/- button once for addition (+) or twice for subtraction (-). The corresponding symbol will appear on the display.
3. Take the second measurement. The result of the operation will be displayed.
4. To clear the calculation, press CLEAR/OFF.

6. Održavanje

• čišćenje: Koristite meku, damp krpu za čišćenje uređaja. Ne koristite abrazivna sredstva za čišćenje, rastvarače niti uranjajte uređaj u vodu.
• Skladištenje: Uređaj čuvajte na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
• baterija: Redovno punite bateriju, čak i ako se uređaj ne koristi često, kako biste održali njeno zdravlje.
• Laserska sočiva: Keep the laser emission and reception lenses clean for accurate measurements. Use a soft cloth, similar to cleaning camera lenses.

7. Otkrivanje problema

8. Specifikacije

Detailed technical specifications for the Dasqua 1804-1055 2-in-1 Laser Tape Measure.

Image: Detailed diagram of the Dasqua 1804-1055 with a list of technical specifications including measurement range, accuracy, laser class, operating conditions, and battery life.

9. Garancija i podrška

Dasqua products are manufactured under strict quality control. This product is inspected and approved for sale by Dasqua quality control centers.

Image: The Dasqua 1804-1055 device alongside a "Warranty Letter" and an instruction manual, indicating product quality assurance.

Dasqua takes responsibility for the quality of the product, providing a 1-year warranty against defects. Parts found to be defective may be repaired or replaced at Dasqua's sole discretion. This warranty does not apply to any product which has been subject to misuse, abuse, improper application, or which has been altered or repaired by unauthorized personnel.

For warranty claims or technical support, please contact your authorized Dasqua dealer or visit the official Dasqua webstranica za kontakt informacije.