Klarstein Monumenta Extractor Hood User Manual

1. Važne informacije o sigurnosti

Please read this manual carefully before installing and operating your Klarstein Monumenta extractor hood. Keep these instructions for future reference.

• Osigurajte napajanje voltage odgovara natpisnoj pločici na uređaju.
• Ne dozvolite djeci da koriste uređaj.
• Uvijek isključite uređaj iz napajanja prije čišćenja ili održavanja.
• Nemojte flambirati ispod kuhinjske nape.
• Osigurajte odgovarajuću ventilaciju u prostoriji kada se kuhinjska napa koristi istovremeno s plinskim ili drugim uređajima na gorivo.
• Izduvni vazduh se ne sme ispuštati u dimnjak koji se koristi za odvođenje dimova iz uređaja koji sagorevaju gas ili druga goriva.
• Redovno čišćenje filtera za masnoću je neophodno kako bi se spriječila opasnost od požara.

2. Proizvod je gotovview

The Klarstein Monumenta is a wall-mounted extractor hood designed to efficiently remove cooking fumes and odors from your kitchen. It features a sleek stainless steel design, LED lighting, and a 5-button control panel.

Figure 1: Klarstein Monumenta extractor hood in a kitchen environment.

The hood can operate in two modes:

• Exhaust Air Mode: Fumes are extracted and discharged outside through a ventilation duct.
• Recirculating Air Mode: Fumes are filtered through activated charcoal filters and the purified air is returned to the kitchen.

3. Postavljanje i instalacija

This section provides general guidance for installing your extractor hood. For detailed steps, refer to the included multilingual user manual and consult a qualified installer if necessary.

3.1 Raspakivanje i komponente

Carefully unpack the appliance and check for any damage. Ensure all components are present:

• 1 x Cooker Hood Unit
• 1 x Grease Filter (pre-installed or separate)
• 2 x Activated Carbon Filters (for recirculation mode)
• Mounting Hardware (screws, wall plugs, brackets)
• Višejezični korisnički priručnik

Figure 2: Components including grease filter and activated carbon filters.

3.2 Montiranje nape

The Klarstein Monumenta is a wall-mounted canopy hood. Ensure the wall is strong enough to support the weight of the hood (approx. 12.5 kg / 27.5 lbs). Maintain the recommended distance between the cooking surface and the bottom of the hood as specified in local building codes and the detailed manual.

• Mark drilling points on the wall according to the provided template.
• Izbušite rupe i umetnite zidne čepove.
• Secure the mounting bracket(s) to the wall.
• Carefully lift and attach the hood to the bracket(s).
• Connect the exhaust ducting (for exhaust air mode) or install activated carbon filters (for recirculation mode).
• Priključite napajanje.

Slika 3: Dimenzije proizvoda za planiranje instalacije.

4. Uputstvo za upotrebu

The Klarstein Monumenta extractor hood features a user-friendly 5-button control panel located on the front.

Figure 4: Control panel and LED lighting.

4.1 Funkcije kontrolne table

Kontrolna ploča obično sadrži dugmad za:

• Uključivanje/isključivanje: To switch the hood on or off.
• Odabir brzine ventilatora: Three distinct power levels (1, 2, 3) are available to adjust the extraction rate according to your cooking needs.
• Svjetlo UKLJUČENO/ISKLJUČENO: To control the integrated LED lighting (2 x 1.5 watts) for illuminating your cooking area.

It is recommended to switch on the extractor hood a few minutes before you start cooking and leave it running for a few minutes after you finish to ensure all fumes and odors are effectively removed.

5. Održavanje

Regular maintenance ensures optimal performance and extends the lifespan of your extractor hood. Always disconnect the power supply before performing any maintenance.

5.1 Čišćenje filtera za masnoću

The aluminum grease filter should be cleaned regularly (approximately every 2-4 weeks, depending on usage) to prevent grease buildup and maintain extraction efficiency. The central front flap can be opened for easy access.

• Uklonite filter za masnoću odvrtanjemasing its latches.
• Wash the filter by hand in hot soapy water or in a dishwasher using a mild detergent.
• Prije ponovne ugradnje provjerite je li filter potpuno suh.

5.2 Replacing Activated Carbon Filters (Recirculation Mode)

If your hood is operating in recirculation mode, the activated carbon filters need to be replaced periodically (typically every 3-6 months, depending on usage) as they cannot be washed. Used filters lose their odor-absorbing capacity.

• Uklonite filter za masnoću da biste pristupili filterima s aktivnim ugljem.
• Twist or unlatch the old carbon filters to remove them.
• Install new activated carbon filters, ensuring they are securely in place.
• Matching replacement activated charcoal filters are available under item number 10030727.

5.3 Čišćenje eksterijera

Očistite vanjštinu od nehrđajućeg čelika mekom krpom i neabrazivnim sredstvom za čišćenje posebno namijenjenim za nehrđajući čelik. Izbjegavajte jake hemikalije ili abrazivne spužve koje bi mogle ogrebati površinu.

6. Otkrivanje problema

If you encounter issues with your extractor hood, refer to the following common troubleshooting steps:

Ako problem i dalje postoji nakon isprobavanja ovih rješenja, obratite se Klarstein korisničkoj podršci.

7. Specifikacije

8. Garancija i podrška

For warranty information, technical support, or service requests, please refer to the warranty card included with your product or contact Klarstein customer service directly. Ensure you have your model number (10039395) and purchase details available when contacting support.

Additional resources, including FAQs and further product documentation, may be available on the official Klarstein website.