Hantek HDP135V6 Programmable DC Power Supply User Manual

1. Proizvod je gotovview

The Hantek HDP135V6 is a single-channel programmable DC power supply designed for various electronic applications. It offers precise control over voltage and current output, with a maximum output of 35V and 6A. Key features include a clear 4-digit display, multiple protection mechanisms, and memory settings for frequently used configurations.

Slika 1.1: Front view of the Hantek HDP135V6 Programmable DC Power Supply, showing the display, control knobs, and output terminals.

Ključne karakteristike:

• Easy setup with two separate rapid adjustment knobs for voltage i struja.
• 4-digit display for voltage and current, with 10mV/1mA resolution.
• Selectable 230V/115V input voltage.
• Maximum output of 35V/6A.
• Standard 5~12V USB quick charge port.
• 10 save/recall memory settings (M1-M10).
• Comprehensive protection features: Over Current (OC), Over Voltage (OV), Overload, Overheat, and Short-circuit protection.
• Key lock function to prevent accidental changes.
• Output ON/OFF switch lock.
• Smart temperature-controlled cooling fan.
• Kompaktan i lagan dizajn za prenosivost.

2. Sigurnosna uputstva

To ensure safe operation and prevent damage to the device or connected equipment, please read and follow these safety instructions carefully.

• Izvor napajanja: Ensure the power supply is connected to a grounded AC outlet with the correct voltage. Verify the AC selector switch on the rear panel is set to the appropriate voltage (115V or 230V) for your region before connecting the power cord.
• ventilacija: Do not block the ventilation openings on the device. Ensure adequate airflow around the unit to prevent overheating.
• Okruženje: Operate the power supply in a dry, well-ventilated area, away from direct sunlight, high temperatures, humidity, and dust.
• Učitavanje veze: Always connect the load to the output terminals before turning on the output. Ensure the load is within the specified voltage and current limits of the power supply.
• Izlazni priključci: Do not touch the output terminals when the power supply is operating.
• Održavanje: Za sve servisne radove obratite se kvalifikovanom osoblju. Ne pokušavajte sami otvarati ili popravljati uređaj.
• Osigurač: Replace fuses only with the specified type and rating.

3. Podešavanje

3.1 Raspakivanje i pregled

Upon receiving your Hantek HDP135V6, carefully unpack the unit and inspect it for any signs of damage during transit. Retain the packaging materials for future transport or storage.

3.2 Priključak za napajanje

1. Locate the AC selector switch on the rear panel of the power supply.
2. Set the switch to the appropriate voltagza vašu regiju (115V ili 230V). Incorrect setting can cause damage to the unit.
3. Connect the provided AC power cord to the power input socket on the rear panel and then to a grounded AC outlet.

Slika 3.1: Pozadi view of the Hantek HDP135V6, highlighting the AC selector switch, power input, and cooling fan.

3.3 Kontrole i indikatori na prednjoj ploči

The front panel provides all necessary controls and displays for operating the power supply.

• Voltage Displej: Prikazuje postavljenu ili stvarnu izlaznu jačinu zvukatage.
• Trenutni prikaz: Prikazuje postavljenu ili stvarnu izlaznu struju.
• Voltage Dugme za podešavanje: Koristi se za podešavanje izlazne jačine zvukatage.
• Dugme za podešavanje struje: Koristi se za postavljanje ograničenja izlazne struje.
• M1-M10 Buttons: Memory buttons for saving and recalling settings.
• Dugme za uključivanje/isključivanje: Prebacuje/isključuje izlaznu snagu.
• Shift dugme: Used in combination with other buttons for advanced functions.
• Dugme za zaključavanje: Activates/deactivates the key lock function.
• Output Terminals (+, -, GND): Priključite opterećenje ovdje.
• Quick Charger USB Port: Provides 5~12V USB output.

4. Uputstvo za upotrebu

4.1 Osnovni rad

1. Ensure the power supply is properly connected to AC power.
2. Press the main power switch on the rear panel to turn on the unit. The display will illuminate.
3. Setting Voltage: Rotirajte Voltage Dugme za podešavanje za podešavanje željene izlazne jačine zvukatage.
4. Postavljanje ograničenja struje: Rotirajte Dugme za podešavanje struje to set the desired maximum output current. This acts as a current limit for your connected load.
5. Priključno opterećenje: Connect your device or circuit to the output terminals (Red for positive '+', Black for negative '-', Green for Ground 'GND').
6. Aktiviranje izlaza: Pritisnite ON/OFF button on the front panel to enable the output. The display will show the actual output voltage i struja.
7. Deactivating Output: Pritisnite ON/OFF ponovo pritisnite dugme da biste deaktivirali izlaz.

4.2 Memorijske funkcije (M1-M10)

The power supply allows you to save and recall up to 10 sets of voltage i trenutne postavke.

• Pohranjivanje postavki: Podesite željeni volumentage and current. Press and hold the Shift button, then press one of the M1-M10 tipke dok se na ekranu ne prikaže da je postavka sačuvana.
• Ponovno pozivanje postavki: Pritisnite željeno M1-M10 button to recall the saved voltage i trenutne postavke.

4.3 Funkcije zaštite

The HDP135V6 includes several protection features to safeguard the unit and connected devices:

• Zaštita od preopterećenja strujom (OCP): Automatically limits or shuts down output if current exceeds the set limit.
• Over Voltage zaštita (OVP): Isključuje izlaz ako je glasnoćatage prelazi unaprijed postavljenu granicu.
• Zaštita od preopterećenja: Štiti od prekomjerne potrošnje energije.
• Zaštita od pregrijavanja: Activates the cooling fan and may shut down if internal temperature is too high.
• Zaštita od kratkog spoja: Immediately cuts off output in case of a short circuit.

4.4 Funkcija zaključavanja tastera

To prevent accidental changes to settings during operation, you can activate the key lock function.

• Aktiviraj zaključavanje: Pritisnite Zaključaj button. A lock icon will appear on the display.
• Deaktiviraj zaključavanje: Pritisnite Zaključaj button again. The lock icon will disappear.

4.5 USB Quick Charge

The front panel features a USB port for quick charging compatible devices. This port provides a variable output from 5V to 12V, depending on the connected device's charging protocol.

5. Održavanje

5.1 Čišćenje

To clean the exterior of the power supply, use a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the unit is powered off and disconnected from the AC supply before cleaning.

5.2 Zamjena osigurača

If the power supply fails to power on, the fuse may need replacement. The fuse holder is located on the rear panel, integrated with the AC input socket.

1. Disconnect the power supply from the AC outlet.
2. Using a small flat-head screwdriver, gently pry open the fuse compartment within the AC input socket.
3. Remove the old fuse and replace it with a new fuse of the same type and rating (e.g., 5.0AT/250V for 110V/115V input, or 3.15AT/250V for 220V/230V input). Refer to the rating label on the rear panel.
4. Dobro zatvorite pretinac sa osiguračima.

6. Otkrivanje problema

If you encounter issues with your Hantek HDP135V6, refer to the following common problems and solutions:

7. Specifikacije

8. Garancija i podrška

8.1 Informacije o garanciji

Hantek products are typically covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or contact Hantek customer service for specific warranty terms and conditions.

8.2 Korisnička podrška

For technical assistance, troubleshooting, or service inquiries, please contact Hantek customer support. Contact information can usually be found on the manufacturer's official webweb-mjestu ili na ambalaži proizvoda.