Genmitsu CFL55P Compressed Spot Laser Module Instruction Manual

1. Sigurnosne informacije

This Genmitsu CFL55P Laser Module is a Class 4 laser product. Improper use can result in serious injury. Always adhere to the following safety precautions:

• Nosite zaštitu za oči: Always wear appropriate laser safety goggles (OD 6+) when operating the laser module. The laser shield included with the module provides some protection but is not a substitute for proper safety goggles.
• Izbjegavajte direktno izlaganje: Nikada ne gledajte direktno u laserski snop ili u njegove refleksije.
• Work in a Ventilated Area: Laser engraving and cutting can produce smoke and fumes. Ensure adequate ventilation or use a fume extractor.
• Protivpožarna sigurnost: Keep a fire extinguisher or water nearby. Do not leave the laser unattended during operation.
• Djeca i kućni ljubimci: Držite djecu i kućne ljubimce podalje od radnog područja.
• Pravilno podešavanje: Ensure the laser module is securely mounted and all connections are correct before operation.

2. Proizvod je gotovview

The Genmitsu CFL55P is a 5.5W compressed spot laser module designed for precision engraving and cutting. It features a fine 0.1mm x 0.1mm laser spot, an integrated air assist nozzle, and a fixed focus design for consistent performance. The module is equipped with an integrated laser shield for enhanced safety.

Figure 2.1: Genmitsu CFL55P Laser Module with Air Assist Nozzle and control board.

Ključne karakteristike:

• Compressed Spot: 0.1mm x 0.1mm focal spot for improved power and accuracy.
• Mlaznica za pomoć pri zraku: Light-weight aluminum nozzle for enhanced engraving speed, quality, and optics protection.
• Fixed Focus Design: Simplifies operation and ensures consistent results.
• UV Laser Shield: Filters laser radiation to prevent accidental exposure.
• Produženi životni vijek: Upgraded heat dissipation for prolonged operation.

Figure 2.2: Diagram highlighting the key features of the CFL55P laser module.

3. Kompatibilnost

The Genmitsu CFL55P Laser Module is compatible with the following Genmitsu CNC milling machines:

• Genmitsu 3018-PRO
• Genmitsu 3018-PROVer
• Genmitsu 3018-PROVer V2
• Genmitsu 3020-PRO MAX
• Genmitsu PROVerXL 6050 Plus
• Genmitsu PROVerXL 4x4
• Genmitsu PROVerXL 2x2

Figure 3.1: Compatible Genmitsu CNC machines.

4. Postavljanje i instalacija

Follow these steps to install your Genmitsu CFL55P Laser Module onto a compatible CNC machine. Specific steps may vary slightly depending on your CNC model.

4.1 Raspakivanje i pregled

• Pažljivo raspakujte sve komponente.
• Verify that all parts are present and undamaged. Refer to the packing list for your specific kit.

Figure 4.1: Typical contents of a Genmitsu laser module kit.

4.2 Removing the Original Spindle/Router

Before installing the laser module, the existing spindle or router on your CNC machine must be removed.

1. Disconnect power from the CNC machine.
2. Carefully unmount and remove the spindle/router from its bracket. Store it safely.

4.3 Installing the Laser Module

1. Attach the laser module to the designated mounting bracket on your CNC machine. Ensure it is securely fastened with the provided screws.
2. Connect the laser module's wiring to the control board according to your CNC machine's specific instructions. Typically, this involves connecting the laser power cable and signal cable.

4.4 Podešavanje žižne daljine

The CFL55P features a fixed focus distance of 30mm. To achieve optimal results, ensure the distance between the laser module's lens and the material surface is approximately 30mm. Use a focal length gauge or a small block of material of known height to set this distance.

Figure 4.2: Illustration of the precise 0.1mm x 0.1mm laser spot.

5. Uputstvo za upotrebu

Once installed, the Genmitsu CFL55P laser module can be used for various engraving and cutting tasks on compatible materials.

5.1 Software and Settings

The laser module is typically controlled using CNC software such as LightBurn or LaserGRBL. Refer to your CNC machine's documentation and the software's user manual for detailed instructions on creating and executing laser jobs.

• Ispitivanje materijala: Always perform small test cuts or engravings on scrap material to determine optimal power and speed settings for your specific material.
• Zračna pomoć: Ensure the air assist system is connected and operational during cutting and engraving to improve cut quality, reduce charring, and protect the laser lens from debris.

Figure 5.1: The integrated air assist nozzle.

5.2 dokample Applications

The CFL55P is capable of cutting 4mm plywood in a single pass and can engrave various materials with high detail.

6. Održavanje

Redovno održavanje osigurava optimalne performanse i produžava vijek trajanja vašeg laserskog modula.

• Očistite sočivo: Periodically inspect and clean the laser lens using a lint-free cloth and lens cleaning solution. The air assist nozzle helps keep the lens clean during operation.
• Provjerite veze: Provjerite da su svi električni priključci sigurni i bez oštećenja.
• Rasipanje topline: The module's upgraded heat dissipation system is designed for long operation. Ensure the cooling fins are free from dust and debris to maintain efficient cooling.

7. Otkrivanje problema

Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti.

7.1 Installation Issues

• Difficulty Mounting: Ensure you have the correct mounting bracket for your specific CNC model. Refer to the installation videos and your CNC manual.
• Wiring Problems: Double-check all wiring connections against the provided diagrams for your CNC machine. Incorrect wiring can prevent the laser from functioning.

7.2 Operation Issues

• Laser ne radi/slab izlaz:
  • Verify power supply and connections.
  • Check software settings (power, speed).
  • Ensure the focal length is correctly set to 30mm.
  • Inspect the laser lens for dirt or damage.
• Loš kvalitet graviranja/rezanja:
  • Adjust power, speed, and passes in your software.
  • Ensure the air assist is active and providing sufficient airflow.
  • Verify material type and consistency.
  • Check for proper focal length.
• Software Communication Errors (e.g., M4/M5 commands): Ensure your CNC firmware and control software are correctly configured for laser operation. Consult the software documentation or Genmitsu support.

8. Specifikacije

9. Garancija i podrška

For warranty information, technical support, or to report missing parts, please contact Genmitsu customer service or visit the official Genmitsu website. Ensure you have your product model number (CFL55P) and purchase details available when contacting support.

Službeno Webstranica: www.sainsmart.com