STABILA LD220 Laserski alat za mjerenje udaljenosti Uputstvo za upotrebu

1. Proizvod je gotovview

The STABILA LD220 is a compact and easy-to-use laser distance measuring tool designed for quick and accurate measurements. It features an impact-resistant housing with a shock-absorbent STABILA soft grip casing, ensuring durability in various working conditions. The large digits on the display facilitate easy reading of measurements.

Ključne karakteristike:

• Compact, easy-to-use laser.
• 4 basic measuring functions: length, area, volume, and continuous measurement.
• Calculates measuring results quickly.
• Large digits for easy readability.
• Impact-resistant housing with shock-absorbent STABILA soft grip casing.

Slika 1.1: Prednja strana view of the STABILA LD220 laser distance measuring tool, showcasing svojim kompaktnim dizajnom i ekranom.

2. Getting Started

2.1 Sadržaj paketa

Uvjerite se da su sve komponente prisutne:

• STABILA LD220 Laser Distance Measuring Tool
• Batteries (Alkaline, LR03/AAA type)

2.2 Instalacija baterije

The STABILA LD220 requires two AAA alkaline batteries for operation. Follow these steps to install them:

1. Pronađite poklopac odjeljka za bateriju na stražnjoj strani uređaja.
2. Pomaknite poklopac prema dolje ili u smjeru koji pokazuje strelica da biste ga otvorili.
3. Insert two AAA alkaline batteries, ensuring the correct polarity (+ and -) as marked inside the compartment.
4. Zatvorite poklopac odjeljka za baterije tako što ćete ga vratiti na mjesto dok ne klikne sigurno.

Figure 2.1: The STABILA LD220 device shown alongside two AAA batteries, indicating the power source.

Slika 2.2: Krupni plan view of the two AAA alkaline batteries, which power the device.

2.3 Uključivanje/isključivanje

Da biste uključili uređaj, pritisnite Power/Clear (C) dugme. Za isključivanje, pritisnite i držite Power/Clear (C) button for a few seconds, or the device will automatically shut off after a period of inactivity to conserve battery life.

3. Uputstvo za upotrebu

The STABILA LD220 offers four primary measuring functions. Familiarize yourself with the buttons:

• Measurement Button (Green, with three arrows): Initiates a measurement or activates continuous measurement.
• Function Button (FUNC): Cycles through different measurement modes (Length, Area, Volume, Continuous).
• Power/Clear Button (C): Powers the device on/off, clears the last measurement, or exits a function.

Slika 3.1: Detaljan view of the STABILA LD220's control panel, highlighting the measurement, function, and power/clear buttons.

3.1 Mjerenje dužine

This is the default mode for single distance measurements.

1. Uvjerite se da je uređaj uključen.
2. Usmjerite laserski snop prema ciljanoj površini.
3. Pritisnite Taster za merenje once. The measured distance will appear on the display.

3.2 Kontinuirano mjerenje (praćenje)

This mode allows for dynamic measurement, displaying real-time distance as you move the device.

1. Pritisnite FUNC button until the continuous measurement icon (often a series of horizontal lines or a tracking symbol) appears on the display.
2. Pritisnite Taster za merenje za početak kontinuiranog mjerenja.
3. Move the device slowly towards or away from the target. The display will update the distance continuously.
4. Pritisnite Taster za merenje ponovo ili C button to stop continuous measurement.

3.3 Mjerenje površine

To calculate the area of a rectangular space (Length x Width).

1. Pritisnite FUNC button until the area measurement icon (a square or rectangle) appears.
2. Measure the first side (e.g., length) by pointing the laser and pressing the Taster za merenje.
3. Measure the second side (e.g., width) by pointing the laser and pressing the Taster za merenje opet.
4. Uređaj će automatski izračunati i prikazati površinu.

3.4 Mjerenje zapremine

To calculate the volume of a rectangular space (Length x Width x Height).

1. Pritisnite FUNC button until the volume measurement icon (a cube or rectangular prism) appears.
2. Measure the first side (e.g., length) by pointing the laser and pressing the Taster za merenje.
3. Measure the second side (e.g., width) by pointing the laser and pressing the Taster za merenje.
4. Measure the third side (e.g., height) by pointing the laser and pressing the Taster za merenje.
5. Uređaj će automatski izračunati i prikazati jačinu zvuka.

Figure 3.2: The product packaging illustrating the various measuring functions, including length, area, volume, and tracking.

4. Njega i održavanje

Proper care and maintenance will extend the life of your STABILA LD220.

• čišćenje: Koristite meku, damp cloth to clean the device. Do not use harsh chemicals, abrasive cleaners, or solvents. Ensure the laser lens and display are kept clean for accurate readings.
• Skladištenje: Store the device in a dry, cool place, away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries to prevent leakage.
• Rukovanje: Although the device has an impact-resistant housing, avoid dropping it or subjecting it to severe shocks.
• Održavanje baterije: Zamijenite baterije kada se na ekranu pojavi indikator slabe baterije. Odložite istrošene baterije u skladu s lokalnim propisima.

5. Otkrivanje problema

If you encounter issues with your STABILA LD220, refer to the following common problems and solutions:

6. Tehničke specifikacije

Detailed specifications for the STABILA LD220 Laser Distance Measuring Tool:

Slika 6.1: Pozadi view of the STABILA LD220, displaying the product label with model number, power requirements, and laser class information.

7. Garancija i podrška

For information regarding product warranty, returns, or technical support, please refer to the documentation included with your purchase or visit the official Stabila webstranica. Specifični uslovi garancije mogu se razlikovati u zavisnosti od regije i prodavca.