Priručnici+

ZIOCOM BH045B

ZIOCOM 2-in-1 Wireless Bluetooth Transmitter/Receiver User Manual

Model: BH045B

1. Proizvod je gotovview

The ZIOCOM 2-in-1 Wireless Bluetooth Transmitter/Receiver is a versatile audio adapter designed to enhance your audio experience by adding Bluetooth capabilities to non-Bluetooth devices. It functions as both a transmitter (TX mode) to send audio from your TV, PC, or MP3 player to Bluetooth headphones or speakers, and a receiver (RX mode) to stream audio from your smartphone or tablet to wired speakers, car stereos, or home sound systems. Featuring Bluetooth 5.0 and aptX Low Latency technology, it ensures high-quality audio with minimal delay.

ZIOCOM 2-in-1 Wireless Bluetooth Transmitter/Receiver with included cables

Figure 1: ZIOCOM 2-in-1 Wireless Bluetooth Transmitter/Receiver and accessories.

Sadržaj paketa:

  • ZIOCOM 2-in-1 Bluetooth Transmitter/Receiver (BH045B)
  • 3.5 mm audio kabl
  • Audio kabel RCA do 3.5 mm
  • USB kabl za punjenje
  • Uputstvo za upotrebu
Contents of the ZIOCOM 2-in-1 Bluetooth Transmitter/Receiver package

Figure 2: Package contents including the device, various cables, and user manual.

2. Raspored i kontrole uređaja

Diagram showing the layout of the ZIOCOM Bluetooth adapter with labeled ports and buttons.

Figure 3: Device layout with key components labeled.

  • Višenamjensko dugme: Power On/Off, Play/Pause, Answer/End/Reject Calls, Redial.
  • Volume Up/Previous Song Button: Increase volume, navigate to previous track.
  • Volume Down/Next Song Button: Decrease volume, navigate to next track.
  • Gumb za uparivanje: Pokreće Bluetooth način uparivanja.
  • Prekidač TX/RX: Prebacuje se između načina rada odašiljača i prijemnika.
  • Indikatorsko svjetlo: Prikazuje status uređaja (uparivanje, povezano, punjenje).
  • Ugrađeni mikrofon: For hands-free calling in RX mode.
  • Tip-C priključak za punjenje: Za punjenje interne baterije.
  • AUX priključak: 3.5mm audio input/output.

3. Podešavanje i punjenje

Početno punjenje:

Before first use, fully charge the device. Connect the supplied USB charging cable to the Type-C charging port on the adapter and the other end to a USB power source (e.g., computer USB port, USB wall adapter). The indicator light will show charging status and turn off when fully charged. A full charge takes approximately 2 hours.

ZIOCOM Bluetooth adapter charging while connected to a TV

Figure 4: The device can be used while charging, providing extended playtime.

Uključivanje/isključivanje:

  • Uključeno: Press and hold the Multifunction Button for 3 seconds until the indicator light turns on.
  • Iskljuciti: Press and hold the Multifunction Button for 3 seconds until the indicator light turns off.

4. Načini rada

The ZIOCOM adapter supports two primary operating modes: Transmitter (TX) and Receiver (RX). Use the TX/RX prekidač on the side of the device to select the desired mode.

Diagram illustrating TX and RX modes of the ZIOCOM Bluetooth adapter

Slika 5: Gotovoview of Transmitter (TX) and Receiver (RX) modes.

4.1. Režim predajnika (TX)

In TX mode, the adapter transmits audio from non-Bluetooth devices (e.g., TV, PC, MP3 player) to Bluetooth-enabled headphones or speakers.

Setup for TX Mode:

  1. Prebacite uređaj na TX mode using the TX/RX switch.
  2. Connect the ZIOCOM adapter to your audio source (TV, PC, MP3 player) using the 3.5mm audio cable or the RCA to 3.5mm audio cable. Plug the 3.5mm end into the adapter's AUX port and the other end into the audio output port of your source device.
  3. Power on the adapter. It will automatically enter pairing mode, indicated by a rapidly flashing blue light.
  4. Postavite Bluetooth slušalice ili zvučnik u način rada za uparivanje.
  5. The adapter will automatically search for and connect to nearby Bluetooth devices. Once connected, the indicator light will turn solid blue.
Person watching TV with ZIOCOM Bluetooth adapter connected, indicating low latency audio

Figure 6: Enjoying low latency audio from TV in TX mode. (Note: Your receiving device must also support aptX Low Latency for optimal performance.)

Dual-Link in TX Mode:

The adapter can connect to two Bluetooth headphones/speakers simultaneously in TX mode.

  1. Connect the first Bluetooth device as described above.
  2. Once the first device is connected, press the Dugme za uparivanje on the ZIOCOM adapter. The indicator light will flash rapidly again.
  3. Put the second Bluetooth headphone/speaker into pairing mode.
  4. The adapter will connect to the second device. Both devices will now receive audio simultaneously.
Couple watching TV with two Bluetooth headphones connected via ZIOCOM adapter

Figure 7: Dual-link feature allowing two Bluetooth headphones to connect to a TV.

4.2. Prijemni (RX) način rada

In RX mode, the adapter receives audio from Bluetooth-enabled devices (e.g., smartphones, tablets) and plays it through wired speakers, car stereos, or home sound systems.

Setup for RX Mode:

  1. Prebacite uređaj na RX mode using the TX/RX switch.
  2. Connect the ZIOCOM adapter to your wired audio system (speakers, car stereo) using the 3.5mm audio cable or the RCA to 3.5mm audio cable. Plug the 3.5mm end into the adapter's AUX port and the other end into the audio input port of your wired system.
  3. Power on the adapter. It will automatically enter pairing mode, indicated by a rapidly flashing blue light.
  4. Na pametnom telefonu ili tabletu omogućite Bluetooth i potražite