1. Uvod
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Prity K1 Optima Multi-fuel Wood Stove. Please read these instructions carefully before using the appliance to ensure proper function and to prevent potential hazards. This model is designed for heating residential premises using solid fuel such as wood or wood briquettes.
The Prity K1 Optima is a compact and efficient wood stove featuring a 2 mm thick steel sheet body and a 3-4 mm thick steel sheet top plate. Its combustion chamber is lined with refractory bricks for optimal heat retention and is equipped with heat-resistant ceramic glass. The stove includes a cast iron grate, wooden door handles, a front flap for air supply control, and an exhaust damper to regulate flame intensity. It comes in a matte black finish.
2. Sigurnosne informacije
UPOZORENJE: Nepravilna instalacija, podešavanje, izmjena, servisiranje ili održavanje mogu uzrokovati ozljede ili materijalnu štetu. Prije instalacije ili servisiranja ove opreme pažljivo pročitajte upute za instalaciju, upotrebu i održavanje.
- Always ensure adequate ventilation when the stove is in operation to prevent carbon monoxide buildup.
- Only use recommended fuel types (dry wood or wood briquettes). Do not burn trash, plastics, or treated wood, as this can release toxic fumes and damage the stove.
- Maintain minimum clearances from combustible materials as specified below:
- pozadi: 400 mm
- Left and Right Sides: 400 mm
- plafon: 600 mm
- Front (in the entire radiation area of the glass): 800 mm
- sprat: 0 mm (if non-combustible)
- Ensure the stove is installed on a stable, non-combustible surface.
- Regularly inspect and clean the chimney and flue pipe to prevent creosote buildup and chimney fires.
- Držite djecu i kućne ljubimce dalje od vrućih površina peći.
- Nikada ne ostavljajte zapaljenu peć bez nadzora.
- Ne skladištite zapaljive materijale u blizini peći.
3. Proizvod je gotovview
Ključne komponente:
- komora za sagorijevanje: Lined with refractory bricks for efficient heat storage and transfer.
- Ceramic Glass Door: Heat-resistant glass allowing view od vatre.
- Rešetka od lijevanog željeza: Supports fuel and allows ash to fall into the ash pan.
- Ash Pan: Collects ash for easy removal.
- Air Supply Control (Front Flap): Regulates the amount of primary air entering the combustion chamber.
- Auspuh Dampovaj: Controls the intensity of the flame and flue gas flow.
- Priključak dimovodne cijevi: Located at the top for connecting to a chimney system.
4. Postavljanje i instalacija
Installation of the Prity K1 Optima wood stove should be performed by a qualified professional in accordance with local building codes and regulations. Failure to do so may void your warranty and create a fire hazard.
Koraci instalacije:
- Odabir lokacije: Choose a location that adheres to the minimum clearances from combustible materials (refer to Section 2). The floor beneath the stove must be non-combustible or adequately protected.
- Priključak na dimnjak: Connect the stove to a suitable chimney system using a Ø 130 mm flue pipe. Ensure all connections are sealed properly to prevent smoke leakage. The chimney must be in good condition and capable of providing adequate draft.
- Niveliranje: Ensure the stove is level and stable on its intended surface.
- Prvi pregled: Before the first use, inspect the stove for any shipping damage or loose components. Ensure the door seals are intact and the air controls operate smoothly.
5. Uputstvo za upotrebu
5.1. Vrsta goriva
The Prity K1 Optima is designed to burn dry wood or wood briquettes. Using unseasoned wood or other materials can lead to inefficient burning, creosote buildup, and potential damage to the stove or chimney.
5.2. First Burn (Curing)
During the first few burns, the paint on the stove will cure, emitting an odor and possibly some smoke. Ensure the area is well-ventilated. Start with small fires and gradually increase the heat over several days to allow the paint to cure properly. Avoid very hot fires during this period.
5.3. Lighting the Stove
- Open the front air supply flap completely.
- Stavite zgužvani papir ili potpale na rešetku od lijevanog željeza.
- Place a small amount of kindling (small, dry wood pieces) on top of the paper/firelighters.
- Zapalite papir/potpaljivače.
- Once the kindling is burning well, add larger pieces of dry wood.
- Zatvorite vrata komore za sagorevanje.
5.4. Air Control and Flame Intensity
- Front Air Supply Flap: This controls the primary air for combustion. Opening it increases the burn rate and heat output, while closing it reduces them. For starting a fire, keep it fully open. Once the fire is established, adjust it to achieve the desired burn rate.
- Auspuh Dampovaj: This mechanism regulates the flow of flue gases and can be used to fine-tune the flame intensity. Adjust it carefully to optimize combustion and heat output.
5.5. Točenje goriva
When the fire dies down and only embers remain, carefully open the door, add more dry wood, and then close the door. Adjust the air controls as needed to re-establish the fire.
6. Održavanje
Regular maintenance ensures the longevity and safe operation of your Prity K1 Optima wood stove.
6.1. Uklanjanje pepela
Empty the ash pan regularly, ideally before each use or when it is full. Ensure the ashes are completely cold before disposing of them in a non-combustible container.
6.2. Cleaning the Ceramic Glass
Clean the ceramic glass when the stove is cold. Use a damp cloth and a non-abrasive glass cleaner specifically designed for wood stove glass. Avoid harsh chemicals or abrasive pads that can scratch the glass.
6.3. Chimney and Flue Pipe Cleaning
Have your chimney and flue pipe inspected and cleaned by a certified chimney sweep at least once a year, or more frequently if you burn the stove heavily. This prevents creosote buildup, which can lead to chimney fires.
6.4. Opšti pregled
Periodically check the door seals for wear and tear. Replace them if they are cracked or hardened to maintain airtightness and efficiency. Inspect all components for any signs of damage or corrosion.
7. Otkrivanje problema
Evo nekih uobičajenih problema i njihovih potencijalnih rješenja:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Dim ulazi u sobu | Poor chimney draft, blocked flue, door opened too quickly, wet wood. | Check for chimney blockages. Ensure flue is clear. Open door slowly. Use dry, seasoned wood. |
| Niska toplotna snaga | Insufficient air supply, wet wood, small fire. | Open air supply flap more. Use dry wood. Build a larger fire with appropriate fuel. |
| Prekomjerna stopa sagorijevanja | Previše dovoda zraka, neispravno zaptivanje vrata. | Close air supply flap partially. Check and replace door seals if necessary. |
| Staklo brzo pocrni | Wet wood, insufficient air wash, low burning temperature. | Use dry wood. Ensure adequate air supply. Burn at a higher temperature for a period to clean the glass. |
8. Specifikacije
The following table details the technical specifications for the Prity K1 Optima Multi-fuel Wood Stove:
| Feature | Specifikacija |
|---|---|
| Brand | Prity |
| Model | K1 Optima |
| Ukupne dimenzije (Š x D x V) | 390 x 390 x 760 mm |
| Dimenzije komore za sagorijevanje (Š x D x V) | 310 x 320 x 460 mm |
| Težina | 60 kg |
| Nominal Heating Power | 8 kW |
| Efikasnost | 75-80% |
| Prečnik dimovodne cevi | Ø 130 mm |
| Heating Area (approx.) | 45.5 m² |
| Heating Capacity (approx.) | 123 m³ |
| Standardi | EN 13240:2001 i EN 13299:2001 |
| Materijal | Steel construction, refractory bricks, ceramic glass, cast iron |
| Vrsta goriva | Drvo |
| Boja | Mat crna |
| Energetska klasa | A (based on energy label for K1 series) |
9. Garancija i podrška
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Spare parts availability information is currently unavailable through standard product specifications.
Kontakt proizvođača:
Proizvođač: Prity 95 LTD
For technical support or inquiries, please contact your authorized Prity dealer or the point of purchase.
