Fanvil PA2S IP SIP Paging Gateway

1. Uvod

The Fanvil PA2S is an advanced IP SIP Paging Gateway designed for robust media streaming using standard IP/RTP/RTSP protocols. This versatile device integrates multiple functionalities including broadcast, recording, intercom, and security features, making it suitable for various deployment scenarios. Its compact design facilitates integration into diverse solutions.

2. Sigurnosne informacije

Please read these safety instructions carefully before using the Fanvil PA2S. Failure to follow these guidelines may result in electric shock, fire, or damage to the device.

• Napajanje: Use only the specified power adapter (12V-24V DC) or a compliant Power over Ethernet (PoE) source. Ensure the power source matches the device's requirements.
• Okruženje: Operate the device in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture. Avoid extreme temperatures.
• Rukovanje: Do not drop, disassemble, or attempt to repair the device yourself. Refer all servicing to qualified personnel.
• Kablovi: Ensure all cables are securely connected and not damaged. Do not route cables where they can be tripped over or damaged.

3. Sadržaj paketa

Provjerite da li se sve stavke nalaze u vašem paketu:

• Fanvil PA2S Unit
• Power Adapter (may vary by region/bundle, if not using PoE)
• Pribor za montažu (vijci, nosači)
• Vodič za brzu instalaciju (ovaj priručnik)

4. Proizvod je gotovview

The Fanvil PA2S features a compact design with various interfaces for connectivity and control.

4.1 Izgled uređaja

Slika 1: Front view of the Fanvil PA2S, showing various input/output terminals and power input.

Slika 2: Ugao view of the Fanvil PA2S, highlighting the network ports on the side.

4.2 Ključne karakteristike

• Emergency button interface for active calls.
• Adaptive 10/100 Mbps network port with built-in Power over Ethernet (PoE).
• NVR video recording support via standard RJ45 interface.
• Recording output with a 3.5 mm standard audio interface.
• Audio output port for connecting an expandable external active speaker.
• One switching signal input and output (built-in relay).
• Mono Channel Power Amplifier Output (10W~30W), adjustable based on input voltage.

5. Podešavanje

Follow these steps to set up your Fanvil PA2S:

1. Montaža: Secure the PA2S unit in your desired location using the provided mounting accessories. Ensure adequate ventilation.
2. Mrežna veza: Connect an Ethernet cable from your network switch or router to the RJ45 network port on the PA2S. If using PoE, this single cable will also provide power.
3. Priključak za napajanje (ako se ne koristi PoE): If PoE is not available, connect a 12V-24V DC power adapter to the power input port on the PA2S.
4. Audio izlaz: Connect external speakers to the "SPK LINE OUT" terminals or an active speaker to the 3.5mm audio output port.
5. Ulaz za mikrofon: Connect a microphone to the "MIC" terminals if required for intercom or recording.
6. Logic Input/Output: Connect external devices for security triggers or control via the "LOGIC IN/OUT" terminals as per your system design.
7. Konfiguracija: Pristupite uređaju web interface via its IP address (refer to your network's DHCP server or use a network scanner to find it) to configure SIP accounts, paging zones, and other settings.

6. Uputstvo za upotrebu

The Fanvil PA2S operates as a SIP endpoint, integrating with your existing IP PBX or SIP server to provide various communication and security functions.

• Paging/Broadcast: Initiate a page or broadcast by dialing the configured extension of the PA2S from a SIP phone. The audio will be streamed to connected speakers.
• interfon: Utilize the microphone input and speaker output for two-way audio communication when configured as an intercom endpoint.
• Snimanje: The device supports recording output via its 3.5mm interface, allowing integration with external recording systems.
• Sigurnosne funkcije: The logic input/output and emergency button interface enable integration with security systems for trigger events and active calls.
• Kontrola jačine zvuka: Adjust output volume through the device's web interface or connected SIP phone controls, if supported.

7. Održavanje

Regular maintenance ensures optimal performance and longevity of your Fanvil PA2S.

• čišćenje: Za čišćenje vanjske strane uređaja koristite meku, suhu krpu. Ne koristite tekuća sredstva za čišćenje ili aerosole.
• Ažuriranja firmvera: Povremeno provjeravajte službene podatke Fanvila. webStranica za ažuriranja firmvera. Ažuriranje firmvera može poboljšati performanse, dodati nove funkcije i ispraviti greške. Pažljivo slijedite upute koje ste dobili uz ažuriranje firmvera.
• Provjere okoliša: Ensure the operating environment remains within recommended temperature and humidity ranges.

8. Otkrivanje problema

If you encounter issues with your Fanvil PA2S, refer to the following common problems and solutions:

9. Specifikacije

10. Garancija i podrška

For warranty information, technical support, or service inquiries regarding your Fanvil PA2S, please contact Fanvil customer support directly or visit their official webSačuvajte račun kao dokaz o kupovini.

Fanvil Official Webstranica: www.fanvil.com