Byron DBY-23442 Kinetic Wireless Doorbell Kit User Manual

1. Uvod

This manual provides instructions for the Byron DBY-23442 Kinetic Wireless Doorbell Kit. This innovative doorbell operates without batteries, utilizing kinetic energy from the push button. It offers a wireless range of up to 100 meters and features 16 selectable melodies. The product casing is constructed from 100% recycled materials, and its packaging is plastic-free, reflecting an eco-conscious design.

2. Sadržaj paketa

Before proceeding with installation, please ensure all components are present:

• 1x Byron DBY-23442 Wireless Doorbell Receiver (Plug-in Chime)
• 1x Byron Kinetic Wireless Push Button
• 1x Adhesive Mounting Pad for Push Button
• 1x Korisnički priručnik (ovaj dokument)

Slika 1: Prednja strana view of the Byron DBY-23442 doorbell receiver (left) and kinetic push button (right).

3. Sigurnosne informacije

• Prije upotrebe pažljivo pročitajte sva uputstva.
• Do not expose the receiver to moisture or extreme temperatures.
• Ensure the plug-in receiver is connected to a standard, properly grounded electrical outlet.
• Ne pokušavajte sami otvarati ili popravljati uređaj. Za sve servisne radove obratite se kvalifikovanom osoblju.
• Držite uređaj podalje od djece.

4. Podešavanje

4.1. Mounting the Kinetic Push Button

1. Select a suitable location for the push button, typically near your entrance. Ensure the surface is clean, dry, and smooth.
2. Peel off the protective film from one side of the adhesive mounting pad and firmly attach it to the back of the kinetic push button.
3. Peel off the protective film from the other side of the adhesive pad and press the push button firmly onto the desired surface for at least 30 seconds. Alternatively, the push button can be mounted using screws (not included) through the designated holes if preferred for a more permanent fixture.

Slika 2: Bočni profesionalacfile of the doorbell receiver and push button, showing their compact design.

4.2. Plugging in the Wireless Doorbell Receiver

Insert the doorbell receiver into a standard electrical wall socket within the 100-meter range of the push button. The receiver will power on automatically.

Slika 3: Pozadi view of the doorbell receiver (left) showing the plug, and the push button (right) showing its back panel.

4.3. Initial Pairing (if necessary)

The doorbell kit is typically pre-paired from the factory. If the doorbell does not ring when the push button is pressed, follow these steps to pair:

1. Press and hold the melody selection button on the receiver for approximately 5 seconds until an indicator light flashes or a short sound is heard, indicating pairing mode.
2. Within 10 seconds, press the kinetic push button. The receiver should then ring, confirming successful pairing.
3. Ako uparivanje ne uspije, ponovite postupak.

5. Uputstvo za upotrebu

5.1. Promjena melodija

The receiver offers 16 different melodies. To cycle through the available melodies, press the 'Melody Selection' button (often marked with a musical note symbol) on the receiver. Stop pressing when you hear your desired melody.

5.2. Podešavanje jačine zvuka

To adjust the volume level, press the 'Volume Control' button (often marked with speaker symbols) on the receiver. Multiple volume levels are available, including a silent mode with visual indication.

Slika 4: Detaljan prednji dio view of the receiver, showing the volume control (left) and melody selection (right) buttons, and the mute indicator (bottom).

5.3. Visual Indication

In addition to audible chimes, the receiver features a visual indicator (e.g., an LED light) that flashes when the doorbell is pressed, providing an alert for those with hearing impairments or when the volume is set to silent.

6. Održavanje

6.1. Čišćenje

Wipe the doorbell receiver and push button with a soft, dry cloth. Do not use abrasive cleaners or solvents.

6.2. Razmatranja životne sredine

The product is designed with recycled materials. Please dispose of the product responsibly at the end of its life cycle according to local regulations.

7. Otkrivanje problema

Problem: Doorbell does not ring.

• Rješenje: Ensure the receiver is properly plugged into a live electrical outlet.
• Rješenje: Check if the push button is pressed firmly and correctly.
• Rješenje: Verify that the receiver is within the 100-meter wireless range of the push button and that there are no significant obstructions (e.g., thick walls, metal structures) that could interfere with the signal.
• Rješenje: Re-pair the push button with the receiver as described in the 'Setup' section.
• Rješenje: Check the volume setting on the receiver; it might be set to silent.

Problem: Doorbell rings intermittently or has poor range.

• Rješenje: Reduce the distance between the push button and the receiver.
• Rješenje: Relocate the receiver to a more central position or away from potential sources of interference (e.g., large metal objects, other wireless devices).

8. Specifikacije

• Broj modela: DBY-23442
• Brand: Byron
• Power Source (Receiver): AC Plug-in
• Power Source (Push Button): Kinetic Energy (Battery-free)
• Bežični domet: Do 100 metara (na otvorenom prostoru)
• melodije: 16 se bira
• Nivoi glasnoće: Multiple, including silent mode
• Dimenzije (prijemnik): Približno 7.5 x 9.5 x 15 cm
• Težina: Otprilike 100 grama
• Materijal: Casing made from 100% recycled materials
• Porijeklo: Kina

9. Garancija i podrška

For warranty information, please refer to the documentation provided at the point of purchase or contact your retailer. For technical support or further assistance, please visit the official Byron webstranice ili kontaktirajte njihov odjel za korisničku podršku.