Tectake luksuzna dizajnerska kancelarijska stolica - uputstvo za upotrebu

1. Uvod

Thank you for choosing the tectake Luxurious Design Office Chair. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new office chair. Please read these instructions carefully before use and retain them for future reference.

Front view of the tectake office chair in white faux leather, showcasing its design and comfortable appearance.

2. Sigurnosna uputstva

• Prije sastavljanja provjerite jesu li sve komponente prisutne i neoštećene. Ne koristite ako bilo koji dio nedostaje ili je slomljen.
• Sastavite stolicu na mekoj, čistoj površini kako biste spriječili ogrebotine.
• Ne stojte na stolici. Koristite je samo za sjedenje.
• Do not exceed the maximum weight capacity (information not provided, assume standard office chair limits, e.g., 120 kg / 265 lbs).
• Držite djecu i kućne ljubimce podalje tokom sastavljanja. Mali dijelovi mogu predstavljati opasnost od gušenja.
• Redovno provjeravajte sve vijke i spojeve kako biste bili sigurni da su čvrsto zategnuti.

3. Sadržaj paketa

Molimo Vas da provjerite da li su sve sljedeće komponente uključene u Vaš paket:

• Naslon za leđa (1)
• Sjedalo (1)
• Nasloni za ruke (2)
• Gas Lift Cylinder (1)
• Star Base (1)
• Kotači (5)
• Mechanism Plate (1)
• Paket hardvera (vijci, podloške, imbus ključ)
• Uputstvo za upotrebu (1)

4. Postavljanje (Upute za montažu)

Follow these steps to assemble your tectake office chair:

1. Pričvrstite kotačiće na bazu: Insert the five casters into the holes at the end of each leg of the star base. Push firmly until they click into place.
2. Umetnite plinski lift: Postavite cilindar za podizanje plina u središnji otvor zvjezdaste baze.
3. Pričvrstite ploču mehanizma na sjedište: Align the mechanism plate with the pre-drilled holes on the underside of the seat. Ensure the front of the mechanism plate faces the front of the seat. Secure with screws from the hardware pack.
4. Attach Armrests to Seat and Backrest: Attach the armrests to the sides of the seat using the provided screws. Then, attach the backrest to the armrests and the seat, securing all connections with screws. Do not overtighten until all screws are in place.
5. Spojite sklop sjedišta na plinski lift: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring the tapered end of the gas lift fits securely into the mechanism plate.

5. Uputstvo za upotrebu

Your tectake office chair is designed for comfort and adjustability. Familiarize yourself with its functions:

5.1. Podešavanje visine

To adjust the chair's height, pull the lever located under the right side of the seat upwards. While holding the lever, either stand up to raise the chair or sit down to lower it. Release the lever at your desired height to lock it in place.

5.2. Funkcija nagiba

The chair features a tilt mechanism for reclining. Pull the same lever outwards to enable the tilt function, allowing the chair to rock back and forth. Push the lever inwards to lock the chair in an upright position.

Close-up of the chair's adjustment lever for height and tilt, and a detail of the smooth-rolling casters.

6. Održavanje

Proper care will extend the life of your office chair:

• čišćenje: For the faux leather and plastic parts, wipe with a soft, damp cloth. Use a mild soap solution if necessary, then wipe dry. Avoid harsh chemicals or abrasive cleaners.
• inspekcija: Periodically check all screws and bolts to ensure they are tight. Retighten if loose.
• Kotačići: Keep the casters clean and free of debris (hair, dust) to ensure smooth rolling.

Close-up of the armrest material, showing the faux leather texture and stitching, highlighting the quality of the upholstery.

7. Otkrivanje problema

Ako imate problema sa stolicom, pogledajte sljedeće uobičajene probleme i rješenja:

• Stolica se ne podešava po visini: Provjerite je li poluga plinskog podizača potpuno aktivirana. Ako problem i dalje postoji, možda je potrebno zamijeniti cilindar plinskog podizača.
• Stolica se ljulja: Check all assembly screws and ensure they are securely tightened. Make sure the gas lift is properly seated in the base and mechanism plate.
• Kotačići se ne kotrljaju glatko: Inspect casters for trapped debris (hair, lint) and clean them. Ensure they are fully inserted into the base.
• Škripavi zvukovi: Apply a small amount of silicone lubricant to moving parts or connections if squeaking occurs.

8. Specifikacije

Key technical details for the tectake Luxurious Design Office Chair:

Diagram illustrating the key dimensions of the office chair for reference.

9. Garancija i podrška

For warranty information or technical support, please contact tectake customer service through their official webweb-mjesto ili prodavača gdje ste kupili proizvod. Sačuvajte račun kao dokaz o kupovini.