RoadCam 720p Mirror Camera

Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Yada RoadCam 720p Mirror Camera. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize its features. This device is designed to provide a clear view of the road and record driving events.

Šta je uključeno

Prije nego što nastavite s instalacijom, provjerite da li se u vašem paketu nalaze sve dolje navedene komponente:

• RoadCam Mirror Camera
• Montažni komplet
• 4GB MicroSD kartica
• 12V/24V adapter za napajanje
• Uputstvo za upotrebu (ovaj dokument)

Figure 1: Included components of the Yada RoadCam 720p Mirror Camera. This image displays the mirror camera unit, a 12V/24V power adapter with a USB cable, and two rubber mounting straps.

Postavljanje i instalacija

1. Montaža kamere:

   The RoadCam is designed to clip over your existing rearview mirror. Use the included rubber straps from the mounting kit to secure the camera firmly to your vehicle's rearview mirror. Ensure the camera lens is unobstructed and facing forward, providing a clear view puta ispred nas.

   

   Figure 2: The RoadCam 720p Mirror Camera mounted in a vehicle, demonstrating its position over the existing rearview mirror and the integrated display.

2. Umetanje MicroSD kartice:

   Locate the MicroSD card slot on the camera unit. Gently insert the provided 4GB MicroSD card into the slot until it clicks into place. Ensure the card is inserted with the correct orientation. This card will store all recorded video footage.

   

   Slika 3: Pozadi view of the RoadCam unit, highlighting the camera lens and the location of the MicroSD card slot on the back.

3. Povezivanje napajanja:

   Connect the 12V/24V power adapter to the camera's power input port. Plug the other end of the adapter into your vehicle's cigarette lighter socket. The camera will typically power on automatically when the vehicle's ignition is turned on.

Uputstvo za upotrebu

The RoadCam features a 2.4" LCD screen and intuitive buttons for easy operation.

Slika 4: Prednja strana view of the RoadCam 720p Mirror Camera, displaying the integrated 2.4" LCD screen and the control buttons located at the bottom edge.

Funkcije dugmadi:

• Dugme za napajanje (⏻): Press and hold to turn the device on or off. A short press may toggle the display on/off during recording.
• Dugme za meni (M): Access the settings menu. Press again to navigate through menu options.
• Dugmad gore/dolje (▲ / ▼): Krećite se kroz opcije menija ili podešavajte postavke.
• Dugme OK: Confirm selections in the menu or start/stop recording (if not in menu).

Ključne karakteristike:

• Snimanje u petlji:

  The camera continuously records video in short segments (e.g., 1, 3, or 5 minutes). When the MicroSD card is full, the oldest unlocked files are automatically overwritten by new recordings. This ensures continuous recording without manual deletion of old files.

• Tehnologija G-senzora:

  The built-in G-Sensor detects sudden impacts or rapid acceleration/deceleration. When such an event is detected, the current video segment is automatically locked and protected from being overwritten by loop recording. This preserves critical footage u slučaju nesreće.

• Park & Record Mode:

  This mode allows the camera to monitor your vehicle even when parked. If the G-Sensor detects a collision or significant vibration while the vehicle is off, the camera will automatically power on and record a short video segment, then power off. This feature requires a continuous power supply to the camera (e.g., hardwiring kit, sold separately, or a continuously powered cigarette lighter socket).

• 2.4" LCD ekran:

  The integrated screen provides real-time viewing of the camera's feed, allowing for proper alignment during installation and instant playback of recorded videos. It also displays important information such as time, date, and recording status.

Održavanje

• Čišćenje kamere:

  Use a soft, dry cloth to clean the camera lens and the LCD screen. Avoid using abrasive cleaners or solvents, as they may damage the surfaces. Ensure the lens is clean for optimal video quality.

• Upravljanje microSD karticom:

  Periodically format the MicroSD card (e.g., once a month) using the camera's menu option to ensure optimal performance and prevent data corruption. Back up any important video files to a computer before formatting. Replace the MicroSD card if you experience frequent recording errors or data loss.

• Ažuriranja firmvera:

  Provjerite proizvođača website (Yada) for any available firmware updates. Firmware updates can improve performance, add new features, or fix bugs. Follow the instructions provided with the firmware update carefully.

Rješavanje problema

Specifikacije

Garancija i podrška

For warranty information and technical support, please refer to the official Yada webweb-mjesto ili direktno kontaktirajte njihovu korisničku službu. Sačuvajte račun kao dokaz o kupovini za bilo kakve reklamacije u vezi s garancijom.

Za dalju pomoć posjetite: www.yada.com