Uputstvo za upotrebu 3D štampača EasyThreed K3

1. Uvod

The EasyThreed K3 is a compact and user-friendly FDM (Fused Deposition Modeling) 3D printer designed for both beginners and experienced users. It features an integrated structure for easy assembly, a silent motherboard for quiet operation, and a magnetic heated build plate for improved print adhesion and easy model removal. This manual provides comprehensive instructions for setting up, operating, and maintaining your K3 3D printer to ensure optimal performance and longevity.

2. Sigurnosna uputstva

• Uvijek koristite štampač u dobro prozračenom prostoru.
• Držite štampač dalje od zapaljivih materijala i izvora toplote.
• Do not touch the hot nozzle or heated bed during operation. Allow components to cool before handling.
• Provjerite je li napajanje ispravno spojeno i uzemljeno.
• Keep children and pets away from the printer during operation.
• Unplug the printer from the power outlet before performing any maintenance or cleaning.

3. Sadržaj paketa

Upon unpacking your EasyThreed K3 3D printer, please verify that all the following components are included:

• EasyThreed K3 3D Printer (partially assembled)
• Adapter za napajanje
• USB kabel
• TF Card (with pre-loaded models and software)
• Filament (10M PLA sample)
• Tools for assembly and maintenance
• Korisnički priručnik (ovaj dokument)

4. Proizvod je gotovview

Familiarize yourself with the main components of your EasyThreed K3 3D printer.

Slika 4.1: Prednja strana view of the EasyThreed K3 3D Printer with a sample print. This image shows the overall design, including the print head, build plate, and control panel.

Figure 4.2: Dimensions of the EasyThreed K3 3D Printer. The image indicates a width of 290mm, depth of 340mm, and height of 330mm, with a build volume of 150x150x150mm.

5. Podešavanje

5.1 Montaža

The EasyThreed K3 comes with an integrated structure and is semi-assembled, making the setup process quick and straightforward. Follow the included visual guide or video instructions (if provided on the TF card) for detailed assembly steps. Typically, this involves attaching the gantry to the base and connecting a few cables.

5.2 Početno uključivanje

1. Connect the power adapter to the printer and a suitable power outlet.
2. Turn on the power switch, usually located at the back or side of the printer.
3. The printer's display (if available) should light up, indicating it is ready for operation.

5.3 Punjenje filamenta

1. Ensure the nozzle is heated to the appropriate temperature for PLA (180-230°C).
2. Insert the filament into the filament sensor (if present) and then into the extruder's intake hole.
3. Push the filament through until it exits the nozzle. You may need to manually extrude a small amount to ensure it flows smoothly and is free of air bubbles.

6. Uputstvo za upotrebu

6.1 Preparing a Model for Printing (Slicing)

Before printing, a 3D model (typically an STL file) needs to be converted into G-code, which the printer understands. This process is called "slicing" and is done using slicing software (e.g., Cura, PrusaSlicer). The included TF card may contain a compatible slicing software or a link to download it.

• Install the slicing software on your computer.
• Load your 3D model (.stl, .obj, etc.) into the software.
• Configure print settings such as layer height, infill density, print speed, and support structures. Refer to the software's documentation for detailed explanations of each setting.
• Slice the model to generate the G-code file.
• Sačuvajte G-kod file na TF karticu.

6.2 Početak štampanja

1. Insert the TF card containing the G-code file into the printer's TF card slot.
2. Navigate the printer's menu (using the control buttons) to select the desired G-code file.
3. Confirm your selection to start the print. The printer will begin heating the nozzle and build plate, then proceed with printing.

6.3 Povezivanje

The EasyThreed K3 supports printing via TF card and USB connection. For USB printing, connect the printer to your computer and use the slicing software's direct print function or a dedicated host software.

7. Održavanje

7.1 Redovno čišćenje

• Ploča za izradu: After each print, remove any residual filament or debris from the magnetic build plate. Clean with isopropyl alcohol if necessary to ensure good adhesion for future prints.
• mlaznica: Periodically clean the exterior of the nozzle with a brass brush while it is warm to remove any plastic buildup.
• Printer Frame: Wipe down the printer frame and rails with a soft, dry cloth to remove dust and filament particles.

7.2 Održavanje mlaznica

If you experience clogs or poor extrusion, the nozzle may need cleaning or replacement. Use the provided needle or a thin wire to clear any blockages while the nozzle is hot. For persistent issues, consider replacing the nozzle.

7.3 Skladištenje filamenta

Store filament in a cool, dry place, ideally in a sealed container with desiccant. PLA can absorb moisture from the air, leading to print quality issues like popping sounds during extrusion or brittle filament.

8. Otkrivanje problema

9. Specifikacije

10. Garancija i podrška

All EasyThreed 3D printers come with a 12-mjesečna garancija i doživotna tehnička podrška. If you encounter any issues or have questions regarding your K3 3D printer, please do not hesitate to contact the manufacturer's customer support. Refer to the product packaging or official webweb mjesto za kontakt detalje.