Scheppach HF60 Table Router Instruction Manual

1. Uvod

This instruction manual provides essential information for the safe and effective use of your Scheppach HF60 Table Router. Please read this manual thoroughly before operating the machine to ensure proper setup, operation, and maintenance. Retain this manual for future reference.

Slika 1: The Scheppach HF60 Table Router. This image displays the complete router unit with its blue base, grey table surface, and adjustable fences.

2. Opća sigurnosna uputstva

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury or damage to the machine.

• Sigurnost radnog područja: Radno područje održavajte čistim i dobro osvijetljenim. Nered ili tamna područja mogu uzrokovati nesreće. Ne koristite električne alate u eksplozivnim atmosferama, kao što je prisustvo zapaljivih tekućina, plinova ili prašine.
• električna sigurnost: Utikači električnih alata moraju odgovarati utičnici. Nikada ne modificirajte utikač ni na koji način. Izbjegavajte kontakt tijela sa uzemljenim površinama. Ne izlažite električne alate kiši ili vlazi.
• Lična sigurnost: Uvijek nosite zaštitu za oči, zaštitu za sluh i masku za prašinu. Obucite se prikladno; ne nosite široku odjeću ili nakit. Držite kosu, odjeću i rukavice dalje od pokretnih dijelova.
• Upotreba i njega alata: Ne forsirajte električni alat. Koristite odgovarajući električni alat za vašu primjenu. Isključite utikač iz izvora napajanja prije bilo kakvih podešavanja, promjene pribora ili skladištenja električnog alata.
• Održavanje: Održavajte električne alate. Provjerite ima li pomicanja ili vezivanja pokretnih dijelova, loma dijelova i svih drugih stanja koja mogu utjecati na rad električnog alata.

3. Components Overview

The Scheppach HF60 Table Router consists of several key components designed for precision woodworking:

• Router Unit: The main body housing the 1500W motor and spindle.
• Površina stola: A robust work surface for supporting materials during routing.
• Produživači stola: Extendable wings on both sides of the main table for increased work support.
• Podesive ograde: Guide the workpiece and ensure accurate cuts.
• Spindle Height Adjustment Mechanism: Allows precise control over the routing depth.
• Collet System: Accommodates router bits with 6mm, 8mm, and 12mm shank diameters.
• Prekidač: On/off control for the machine.
• Brojčanik za kontrolu brzine: Adjusts the spindle rotation speed.

4. Podešavanje

Pravilno podešavanje je ključno za siguran i precizan rad.

4.1 Raspakivanje i pregled

Carefully remove all components from the packaging. Inspect the machine for any signs of damage that may have occurred during transit. Report any damage to your supplier immediately.

4.2 Assembly of Table Extenders

The HF60 comes with table extenders that can be attached to both sides of the main table. Secure these extenders using the provided hardware to expand your working surface (total table size 610 x 360 mm).

Slika 2: The Scheppach HF60 Table Router in a workshop setting, demonstrating the practical table model with its extended work surface and fastening capabilities.

4.3 Mounting the Machine

For stability and safety, it is recommended to securely mount the table router to a workbench or a dedicated stand. Use appropriate fasteners to prevent movement during operation.

4.4 Priključivanje na napajanje

Ensure the power switch is in the 'OFF' position before plugging the machine into a 230V power outlet. Verify that the power supply matches the machine's requirements.

5. Operacija

Follow these steps for safe and effective operation of your Scheppach HF60 Table Router.

5.1 Installing Router Bits

1. Provjerite da li je mašina isključena iz izvora napajanja.
2. Select the appropriate collet (6mm, 8mm, or 12mm) for your router bit.
3. Umetnite steznu steznu u vreteno.
4. Insert the router bit into the collet, ensuring it is seated deeply enough to prevent slippage but not bottomed out.
5. Tighten the collet nut securely using the provided wrenches.

5.2 Spindle Height Adjustment

The spindle height can be adjusted from 0 to 40 mm to control the depth of cut.

Slika 3: Close-up view of the Scheppach HF60's spindle height adjustment mechanism, showing a workpiece being routed and the maximum routing depth of 40 mm.

Use the adjustment knob or crank to raise or lower the router bit to the desired height. Lock the adjustment mechanism once the desired height is set.

5.3 Regulacija promjenjive brzine

The HF60 features variable speed control from 11500 to 24000 rpm. Adjust the speed according to the material being routed and the type of router bit used. Lower speeds are generally suitable for larger diameter bits and harder materials, while higher speeds are for smaller bits and softer materials.

5.4 Adjusting Fences

The aluminum fences guide your workpiece. Adjust them to the desired position to control the width of the cut or to support the workpiece against the router bit.

5.5 Routing Applications

The Scheppach HF60 is suitable for various routing tasks, including:

• Rounding edges
• Košenje
• Flush trimming
• Grooving
• Profile rutiranje
• Spajanje

Slika 4: Vizualni eksamples of various routing applications possible with the Scheppach HF60, including rounding, chamfering, flush trimming, grooving, profile routing, and jointing.

5.6 Usisavanje prašine

The machine is designed for direct dust extraction to maintain a clean and safe working environment. Connect a suitable dust extraction system to the designated port.

6. Održavanje

Regular maintenance ensures the longevity and optimal performance of your table router.

• čišćenje: After each use, disconnect the power and clean the machine, especially the table surface, fences, and spindle area, from dust and wood chips. Use a brush or compressed air.
• podmazivanje: Periodically lubricate moving parts, such as the spindle height adjustment mechanism, with a suitable lubricant.
• inspekcija: Regularly inspect the power cord for damage. Check all fasteners for tightness. Ensure router bits are sharp and free from damage.
• Skladištenje: Store the machine in a dry, secure location, out of reach of children.

7. Otkrivanje problema

This section addresses common issues you might encounter with your table router.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Scheppach customer support or a qualified service technician.

8. Tehničke specifikacije

9. Garancija i podrška

For information regarding warranty coverage, technical support, or spare parts, please refer to the official Scheppach website or contact your local Scheppach dealer. Keep your purchase receipt as proof of purchase.