Uvod
The Keychron Q7 is a wired custom mechanical keyboard featuring a 70% layout, designed for versatility and performance. It supports QMK/VIA for extensive customization, includes hot-swappable Gateron G Pro Red switches, and is built with a double-gasket design for an enhanced typing experience. This manual provides instructions for setup, operation, maintenance, and troubleshooting.
Image: The Keychron Q7 Custom Mechanical Keyboard, showcasing its compact 70% layout and aluminum build.
Sadržaj paketa
Verify that all items listed below are included in your Keychron Q7 package:
Image: Diagram illustrating the Keychron Q7 keyboard and its accompanying accessories.
- tastatura: 1x Fully Assembled Keychron Q7 Keyboard (includes Aluminum Case, PCB, Steel Plate, Sound Absorbing Foam, Case Foam, 10 Gaskets (6 installed, 4 in box))
- Komponente: 5 sets x Stabilizers, 1 set x Double-Shot PBT Keycaps, 1 set x Gateron G Pro Switches
- Kablovi: 1x Type-C to Type-C Cable, 1x Type-A to Type-C Adapter
- Alati: 1x Switch Puller, 1x Keycap Puller, 1x Screwdriver, 1x Hex Key
Napomena: Sav alat se nalazi na dnu kutije.
Setup
1. Povezivanje tastature
- Pronađite USB-C priključak na stražnjoj strani Keychron Q7 tastature.
- Connect one end of the provided Type-C to Type-C cable to the keyboard.
- Connect the other end of the cable to your computer's USB-C port. If your computer only has USB-A ports, use the included Type-A to Type-C adapter.
- Vaš operativni sistem bi trebao automatski prepoznati tastaturu.
2. Switching Operating System Layout
The Keychron Q7 features a physical switch to toggle between Windows and macOS layouts. This ensures proper key mapping for your specific operating system.
Slika: Sa strane view of the Keychron Q7, showing the physical switch to select between Windows and macOS modes.
- Locate the switch on the side of the keyboard, near the USB-C port.
- Slide the switch to the 'Win' position for Windows/Linux systems.
- Slide the switch to the 'Mac' position for macOS systems.
Uputstvo za upotrebu
QMK and VIA Customization
The Keychron Q7 fully supports QMK and VIA open-source firmware, allowing for extensive customization of key assignments, macros, and backlighting. This functionality is compatible with Mac, Windows, and Linux operating systems.
- To customize your keyboard, download the Keychron Launcher Web App or the VIA software from the official Keychron website.
- The software provides a graphical interface to remap keys, create complex macros, and adjust RGB lighting effects.
- For detailed instructions on using QMK/VIA, refer to the documentation available on the Keychron support page or the QMK/VIA official webweb stranice.
Image: Keychron Launcher Web App interface for key remapping and macro programming.
Prekidači koji mogu da se menjaju tokom rada
The Q7 features a hot-swappable design, allowing you to change switches without soldering. It supports both 3-pin and 5-pin MX-style mechanical switches.
Image: Keyboard PCB with keycaps removed, showing hot-swappable switch sockets and various switch types.
- Uklanjanje prekidača: Use the included switch puller tool. Gently grip the switch from the top and bottom, then pull straight up with even pressure until the switch detaches from the PCB.
- Instaliranje prekidača: Align the pins of the new switch with the holes on the PCB. Ensure the switch is oriented correctly. Gently press the switch down until it clicks into place. Do not force the switch, as this can bend the pins.
Dvostruko obrađene PBT kapice za tipke
The Q7 comes with durable double-shot PBT keycaps. These keycaps are resistant to shine and wear, ensuring legends remain clear over time.
Image: Close-up of the keyboard's double-shot PBT keycaps.
South-Facing RGB Backlighting
The keyboard features south-facing RGB LEDs, which provide even backlighting and are ideal for compatibility with most custom keycap sets.
Image: Illuminated south-facing RGB switches on the Keychron Q7 keyboard.
Održavanje
Čišćenje tastature
- Prije čišćenja isključite tastaturu iz računara.
- Koristite meku krpu koja ne ostavlja dlačiceampOčistite tipke i kućište vodom ili blagim sredstvom za čišćenje. Izbjegavajte prekomjernu vlagu.
- Za čišćenje između tipki, koristite komprimirani zrak za uklanjanje prašine i ostataka.
- For deeper cleaning, you may remove keycaps using the included keycap puller. Clean the keycaps separately with water and mild soap, then ensure they are completely dry before reattaching.
Održavanje prekidača i tipki
- When removing or installing switches, apply gentle, even pressure to avoid bending switch pins or damaging the PCB sockets.
- Store spare switches and keycaps in a clean, dry place to prevent dust accumulation or damage.
Rješavanje problema
If you encounter issues with your Keychron Q7 keyboard, refer to the following common troubleshooting steps:
- Tastatura ne reaguje:
- Provjerite je li USB-C kabel sigurno povezan i s tastaturom i s računarom.
- Pokušajte povezati tastaturu s drugim USB priključkom na računaru.
- Verify that the operating system switch (Mac/Win) on the side of the keyboard is set correctly for your system.
- Testirajte tastaturu na drugom računaru kako biste isključili problem specifičan za računar.
- Ključevi se ne registruju:
- Carefully remove the keycap and switch for the non-functioning key using the provided tools.
- Pregledajte igle prekidača da li imaju savijanja ili oštećenja. Ako je moguće, pažljivo ispravite savijene igle pincetom.
- Reinsert the switch firmly into the PCB socket. If the issue persists, try swapping it with a known working switch.
- Problemi sa RGB osvetljenjem:
- Check the Keychron Launcher Web App or VIA software to ensure lighting settings are configured as desired.
- Ensure no software conflicts are interfering with the lighting control.
- Ažuriranje firmvera: Ako imate stalnih problema, provjerite službeni Keychron. website for any available firmware updates for the Q7 model. Follow the provided instructions carefully for firmware updates.
For further assistance, please visit the official Keychron support page.
Specifikacije
Slika: Eksplodirano view of the Keychron Q7 keyboard's internal components.
| Feature | Detalj |
|---|---|
| Model | Keychron Q7 |
| Layout | 70% Raspored |
| Povezivanje | Žični (USB-C) |
| Tip prekidača | Hot-swappable Gateron G Pro Red Switch |
| Operating Force (Gateron G Pro Red) | 45±15gf |
| Pre-travel (Gateron G Pro Red) | 2 ± 0.6 mm |
| Travel Distance (Gateron G Pro Red) | 4 ± 0.6 mm |
| Switch Behavior (Gateron G Pro Red) | Linearno |
| Pre-lubed (Gateron G Pro Red) | Da |
| Sound Level (Gateron G Pro Red) | Tiho |
| Kapice | Dvostruki PBT |
| Pozadinsko osvetljenje | RGB okrenut prema jugu |
| Materijal okvira | Aluminijum |
| Montažni stil | Double Gasket Design |
| Podrška za firmver | QMK/VIA programabilni |
| Kompatibilan OS | Mac, Windows, Linux |
| Dimenzije proizvoda | 13.44 x 4.76 x 1.33 inča |
| Težina artikla | 5.17 funte |
Image: Detailed specifications for the Gateron G Pro Red switches.
Garancija i podrška
Keychron products are designed for quality and durability. For information regarding warranty coverage, technical support, or to access additional resources such as firmware updates and software downloads, please visit the official Keychron website or their dedicated support pages.
Više informacija i kontaktiranje podrške možete pronaći putem Keychron Brand Store on Amazon.
