RAM Mounts X-Grip Tether RAM-TETHER1U Universal Instruction Manual

Uvod

The RAM Mounts X-Grip Tether RAM-TETHER1U is designed to provide enhanced security for your smartphone when used with RAM X-Grip phone holders. Constructed from high-strength elastomeric rubber, this tether fits securely around the corners of your phone, offering additional peace of mind in demanding environments. It is compatible with standard (UN7), large size (UN10), and wireless charging (UN12) RAM X-Grip phone holders.

Sigurnosne informacije

• Always ensure the tether is correctly installed and securely holding your device before operation.
• Regularly inspect the tether for any signs of wear, tear, or damage. Replace immediately if any damage is observed.
• Avoid overstretching the tether beyond its intended limits, as this may compromise its integrity.
• Ne ometajte svoje view or interfere with vehicle controls when mounting your device.

Postavljanje i instalacija

Follow these steps to properly install the RAM Mounts X-Grip Tether with your X-Grip phone holder:

1. Prepare the X-Grip Holder: Ensure your RAM X-Grip phone holder is already securely mounted to your desired surface (e.g., vehicle dashboard, motorcycle handlebars).
2. Postavite telefon: Place your smartphone into the RAM X-Grip holder, ensuring it is centered and held firmly by the X-Grip arms.
3. Attach the Tether:
   • Stretch one loop of the elastomeric tether over a corner of your phone.
   • Carefully stretch the opposite loop of the tether over the diagonally opposite corner of your phone.
   • Repeat this process for the remaining two corners, ensuring the tether is snug around all four corners of your device.
4. Provjera sigurnosti: Gently tug on the phone to confirm that both the X-Grip arms and the tether are holding the device firmly in place. The tether should not interfere with screen functionality or button access.

For a visual guide on the X-Grip system and tether, please refer to the video below:

Uputstvo za upotrebu

Once installed, the RAM Mounts X-Grip Tether operates in conjunction with your RAM X-Grip holder to maintain device stability. No further operational steps are required beyond ensuring proper installation before each use.

• The tether provides an additional layer of security, especially during high-vibration activities or in open-cockpit environments.
• To remove your phone, gently stretch the tether loops off the corners of your device, then release the X-Grip arms.

Održavanje

• čišćenje: Clean the tether with mild soap and water. Avoid harsh chemicals or abrasive materials that could degrade the elastomeric rubber.
• inspekcija: Periodically inspect the tether for any signs of cracking, stretching, or other damage. The integrity of the rubber is crucial for its function.
• Skladištenje: When not in use, store the tether in a cool, dry place away from direct sunlight to prolong its lifespan.

Rješavanje problema

If you encounter issues with your RAM Mounts X-Grip Tether, consider the following:

• Tether feels loose: Ensure the tether is stretched over all four corners of your phone and that the phone is properly seated in the X-Grip holder. The tether is designed to fit snugly.
• Difficulty stretching the tether: The elastomeric material requires some force to stretch. If it is excessively difficult, ensure your phone size is within the compatible range for your X-Grip holder (UN7, UN10, or UN12).
• Tether shows signs of wear: Replace the tether immediately if you notice any cracks, tears, or significant stretching, as its protective capability may be compromised.

Specifikacije

Informacije o garanciji

For detailed warranty information regarding your RAM Mounts X-Grip Tether, please refer to the official RAM Mounts webweb-mjesto ili direktno kontaktirajte njihovu korisničku podršku. Uslovi garancije mogu se razlikovati.

Podrška

Ako vam je potrebna dodatna pomoć ili imate pitanja koja nisu obuhvaćena ovim priručnikom, posjetite RAM MOUNTS Store on Amazon or the official RAM Mounts webstranica za resurse korisničke podrške.