Uputstvo za upotrebu 3D štampača Artillery Hornet

1. Uvod

Thank you for choosing the Artillery Hornet 3D Printer. This manual provides essential information for the safe and efficient operation of your new 3D printer. Please read this manual thoroughly before operating the device to ensure proper setup, usage, and maintenance. The Artillery Hornet is designed for ease of use, featuring a highly integrated structure and 95% pre-assembly for quick setup.

Figure 1.1: The Artillery Hornet 3D Printer, showcasing its compact and integrated design.

2. Sigurnosna uputstva

Uvijek se pridržavajte sljedećih sigurnosnih smjernica kako biste spriječili ozljede ili oštećenje pisača:

• Napajanje: Use only the specified power adapter. Ensure the power outlet is properly grounded.
• Radno okruženje: Operate the printer in a well-ventilated area, away from flammable materials, direct sunlight, and excessive humidity. Maintain a stable room temperature.
• Vruće površine: The print nozzle and print bed can reach high temperatures. Avoid touching these components during operation or immediately after use. Allow them to cool down completely before handling.
• Pokretni dijelovi: Keep hands, hair, and loose clothing away from moving parts during operation to prevent entanglement.
• Rukovanje filamentom: Store filament in a dry place to prevent moisture absorption, which can affect print quality.
• Djeca i kućni ljubimci: Držite štampač van dohvata djece i kućnih ljubimaca. Potreban je nadzor odraslih ako su djeca prisutna.
• Isključivanje u nuždi: Familiarize yourself with the location of the power switch for quick shutdown in case of an emergency.

3. Sadržaj paketa

Upon unpacking, please verify that all components are present and undamaged. Due to the 95% pre-assembled design, the number of loose parts is minimal.

• Artillery Hornet 3D Printer (Main Unit)
• Power Cable
• Filament Holder
• USB kabel
• Tool Kit (e.g., wrenches, screwdrivers, nozzle cleaning needle)
• Sample Filament
• SD Card / USB Drive (with software and test models)
• Korisnički priručnik (ovaj dokument)

4. Podešavanje

The Artillery Hornet is designed for quick assembly, with 95% of the printer pre-assembled. Follow these steps to complete the setup:

1. Raspakivanje: Pažljivo izvadite štampač i svu dodatnu opremu iz ambalaže. Sačuvajte ambalažu za budući transport ili skladištenje.
2. Base and Gantry Assembly: The main gantry structure is largely pre-assembled. Attach the gantry to the base unit using the provided screws. Ensure it is securely fastened.
   

   Slika 4.1: Prednja strana view of the printer, showing the integrated base and gantry structure.

3. Povezivanje kablova: Connect the hotend and motor cables to their respective ports. Ensure all connections are firm and correct. Refer to the labels on the cables and ports.
   

   Figure 4.2: Detail of the hotend and extruder, showing cable connections.
4. Instalirajte držač filamenta: Mount the filament holder onto the designated slot on the printer.
5. Priključak za napajanje: Connect the power cable to the printer's power input and then to a grounded electrical outlet. Ensure the power switch is in the OFF position before connecting.
   

   Slika 4.3: Pozadi view of the printer base, highlighting the power input and switch.

6. Leveling the Print Bed: The Artillery Hornet features a tempered glass print bed. While often pre-leveled, it's crucial to verify and adjust if necessary for optimal first layer adhesion.
   • Uključite štampač.
   • Navigate to the "Leveling" or "Prepare" menu on the LCD screen.
   • Move the nozzle to each corner of the print bed and adjust the leveling knobs underneath the bed until a piece of paper (standard printer paper) can slide with slight friction between the nozzle and the bed.
   • Repeat for all four corners and the center until consistent.

5. Uputstvo za upotrebu

5.1. Software Installation (Slicer)

To prepare 3D models for printing, you will need a slicer software. Popular options include Cura, PrusaSlicer, or Simplify3D. An SD card or USB drive with a recommended slicer profile might be included with your printer. Install the software on your computer and configure it for the Artillery Hornet.

• Install the slicer software from the provided SD card or download the latest version online.
• Add a new printer and select "Artillery Hornet" if available, or configure a custom FDM printer with the following build volume: 220 x 220 x 250 mm.
• Import the recommended printer profile (if provided) or configure basic settings like nozzle diameter (0.4mm), filament diameter (1.75mm), and retraction settings.

5.2. Punjenje filamenta

Follow these steps to load filament into your printer:

1. Postavite kalem s filamentom na držač filamenta.
2. Preheat the nozzle to the recommended temperature for your filament type (e.g., 200-210°C for PLA). You can do this via the printer's LCD menu (Prepare > Preheat PLA/ABS).
3. Umetnite filament u ulazni otvor ekstrudera.
4. Gently push the filament until it engages with the extruder gears.
5. Use the "Extrude" or "Load Filament" option from the printer's menu to feed the filament through the hotend until molten plastic comes out of the nozzle. This purges any old filament and ensures a smooth flow.

5.3. Početak štampanja

Once your model is sliced and filament is loaded, you can start printing:

1. Save the sliced G-code file to an SD card or USB drive.
2. Insert the SD card/USB drive into the printer's slot.
3. Navigate to the "Print from SD" or "Print" menu on the LCD screen.
4. Select your G-code file sa liste.
5. The printer will begin heating the bed and nozzle, then start the print. Monitor the first layer to ensure proper adhesion.

6. Održavanje

Regular maintenance ensures the longevity and optimal performance of your Artillery Hornet 3D Printer:

• Očistite podlogu za štampanje: After each print, allow the bed to cool and carefully remove the printed object. Clean the glass bed with isopropyl alcohol to remove any residue, ensuring good adhesion for future prints.
• Očistite mlaznicu: Periodically clean the exterior of the nozzle with a brass brush to remove any accumulated plastic. If the nozzle is clogged, use the provided cleaning needle to clear the obstruction while the nozzle is hot.
• Podmažite pokretne dijelove: Apply a small amount of lithium grease or similar lubricant to the Z-axis lead screw and smooth rods every few months to ensure smooth movement.
• Provjerite pojaseve: Ensure the X and Y axis belts are properly tensioned. They should be taut but not overly tight. Adjust if necessary.
• Pregledajte kablove: Regularly check all cables for wear, fraying, or loose connections.
• Ažuriranja firmvera: Provjerite službenu artiljeriju website for any available firmware updates. Follow the instructions carefully if updating.

7. Otkrivanje problema

Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti i njihovim mogućim rješenjima.

8. Specifikacije

Key technical specifications for the Artillery Hornet 3D Printer:

9. Garancija i podrška

For warranty information, technical support, or spare parts inquiries, please refer to the official Artillery webweb-mjesto ili kontaktirajte prodavača. Sačuvajte račun kao dokaz o kupovini.

Online resursi:

• Artillery Official Website (for product information, drivers, and firmware)
• Product Page on Amazon.com.be