Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of your Herdio 6.5-inch Bluetooth Ceiling Speakers with In-Wall Amplifier. This system is designed to deliver high-fidelity audio for various indoor environments, including home theaters, bathrooms, living rooms, kitchens, and offices. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
Sadržaj paketa
Provjerite da li se u vašem paketu nalaze sve dolje navedene stavke:
- 1x Wall Mount Bluetooth Amplifier
- 1x AC adapter
- 2x Screws
- 2x 6.5-inch In-Ceiling Speakers
- 2x Speaker Wires
- 2x User Manuals (one for amplifier, one for speakers)
Setup
This section guides you through the physical installation and wiring of your Herdio ceiling speaker system.
1. Ampinstalacija podizača
U zidu amplifier is designed for flush mounting in a standard wall plate size. Ensure you have appropriate wiring access before proceeding.
- Pripremite zid: Use the provided template (if applicable) to mark and cut an opening in the wall for the amplifier.
- Povežite kabl za napajanje: Connect the 12V DC power cable to the designated two-pin connector on the back of the ampmodul za podizanje.
- Spojite audio kabel: Connect the audio cable to the three-pin connector on the back of the ampmodul za podizanje.
- Sigurno Ampdizalica: Umetnite amplifier module into the wall opening and secure it using the provided screws.
- Pričvrstite prednju ploču: Place the decorative faceplate over the installed amplifier and secure it.
2. Instalacija zvučnika
The ceiling speakers are designed for flush mounting. Ensure you have appropriate ceiling space and wiring access.
- Izrez oznake: Use the provided cutout template to mark the desired location for each speaker in the ceiling.
- Otvaranje rezanja: Carefully cut the circular opening in the ceiling according to the marked template. The cutout diameter is approximately 8.07 inches (20.5 cm).
- Uklonite rešetku: Gently remove the magnetic grille from the front of each speaker.
- Povežite žice zvučnika: Connect the speaker wires to the spring-loaded terminals on the back of each speaker. Ensure correct polarity: red wire to positive (+) terminal, black wire to negative (-) terminal.
- Umetni zvučnik: Insert the speaker into the ceiling opening. The mounting clamps will automatically engage.
- Zategnite Clamps: Use a screwdriver to tighten the screws on the front baffle of the speaker. This will rotate the mounting clamps and secure the speaker firmly in place.
- Replace Grille: Reattach the magnetic grille to the speaker.
3. Dijagram ožičenja
Connect the speaker wires from the ceiling speakers to the amplifier terminals. Ensure correct polarity for both speakers (red to +, black to -).
4. Priključak za napajanje
Connect the AC adapter to a standard 120V power outlet and then plug the DC end into the amplifier's power input. The power LED on the ampLampica za snižavanje temperature će se upaliti.
Video: This video demonstrates the unboxing, wiring, Bluetooth pairing, and installation process for the Herdio 6.5-inch Bluetooth Ceiling Speakers Set.
Uputstvo za upotrebu
Learn how to use your Herdio ceiling speaker system.
1. Uključivanje/isključivanje i kontrola jačine zvuka
Turn the knob on the amplifier clockwise to power on the unit and increase the volume. Turn it counter-clockwise to decrease volume and power off. You will hear an audible drop sound when powering on.
2. Bluetooth uparivanje
After powering on, the blue Bluetooth indicator light will flash, indicating it is in pairing mode. On your smart device (phone, tablet, etc.), search for available Bluetooth devices and select 'Herdio'. Once connected, the blue light will remain solid.
3. Izbor ulaza
Use the input selection switch on the amplifier to choose between Bluetooth (BT), Auxiliary (AUX), or Microphone (MIC) input modes.
4. USB Functionality
The USB port functions as a flash memory reader for media playback and also provides a charging port for your devices (5V/1A).
5. Ulaz za mikrofon
Connect a microphone to the 1/4-inch MIC IN jack for paging or voice applications.
Održavanje
To ensure the longevity and optimal performance of your Herdio ceiling speakers and ampspašivač, slijedite ove smjernice za održavanje:
- čišćenje: Za čišćenje koristite meku, suhu krpu amplifier faceplate and speaker grilles. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish.
- Uklanjanje prašine: Periodically use a soft brush or a low-power vacuum with a brush attachment to gently remove dust from the speaker grilles.
- Uslovi okoline: Ensure the speakers and amplifier are installed in environments free from excessive moisture, extreme temperatures, and direct sunlight. The product is not waterproof.
- Inspekcija ožičenja: Periodically check all wiring connections to ensure they are secure and free from corrosion or damage.
Rješavanje problema
If you encounter issues with your Herdio ceiling speaker system, refer to the following common problems and solutions:
- Nema napajanja:
- Ensure the AC adapter is securely plugged into a working power outlet and the amplifier's DC input.
- Check if the power knob on the amplifier is turned clockwise to the 'ON' position.
- Provjerite da li je utičnica funkcionalna tako što ćete uključiti drugi uređaj.
- Nema zvuka iz zvučnika:
- Confirm that the speaker wires are correctly connected to both the speakers and the amplifier, observing proper polarity (+ to +, - to -).
- Ensure the volume knob on the ampLifier je podignut.
- Check the input selection switch on the amplifier to ensure the correct source (BT, AUX, MIC) is selected.
- Ako koristite Bluetooth, provjerite je li vaš uređaj uparen i reproducira li zvuk.
- If using AUX or MIC, ensure the external device is connected and functioning correctly.
- Problemi sa Bluetooth vezom:
- Osigurajte amplifier is in Bluetooth pairing mode (blue light flashing).
- Make sure your Bluetooth device is within the 30+ feet wireless range.
- Forget the 'Herdio' device from your smart device's Bluetooth settings and attempt to re-pair.
- Ponovo pokrenite oba amplifier i vaš Bluetooth uređaj.
- izobličeni zvuk:
- Smanjite jačinu zvuka na oba amplifier and your audio source device.
- Provjerite spojeve žica zvučnika na labave žice ili kratke spojeve.
- Ensure the audio source is not overdriven or producing distorted signals.
Specifikacije
| Brand | Herdio |
| Naziv modela | HCS 818 |
| Vrsta zvučnika | Woofer, Visokotonac |
| Veličina zvučnika | 6.5 inča |
| Maksimalna izlazna snaga zvučnika | 320 Watts |
| Impedansa | 8 Ohma |
| Frekvencijski odziv | 20 KHz (Note: This is likely the upper limit, typical range is broader) |
| Tehnologija povezivanja | Pomoćni, Bluetooth, USB |
| Bežična komunikacijska tehnologija | Bluetooth |
| Bluetooth domet | 30 stopa |
| Ulazni voltage | 120 Volts |
| Izvor napajanja | Corded Electric |
| Vrsta montaže | Ugradna montaža, Montaža na plafon |
| Dimenzije proizvoda (Ampdizalica) | 9.25"D x 9.25"W x 4.13"H (Note: This dimension seems to be for the speaker, not the amplifier. Amplifier is typically smaller, as shown in images.) |
| Materijal | akrilonitril butadien stiren (ABS) |
| Je vodootporan | NETAČNO (Nije vodootporno) |
| Težina artikla | 9.08 funte (ukupna težina paketa) |
Informacije o garanciji
The Herdio 6.5-inch Bluetooth Ceiling Speakers with In-Wall AmpLifier dolazi sa a Ograničena garancija. For specific details regarding warranty coverage, duration, and claims process, please refer to the warranty card included in your package or contact Herdio customer support directly.
Podrška
For further assistance, technical support, or inquiries regarding your Herdio product, please visit the official Herdio website or contact their customer service department. Contact information can typically be found on the product packaging or on the Herdio website.
