Adtran NetVanta 1560-48-Port PoE Switch User Manual

1. Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of the ADTRAN NetVanta 1560-48-Port, 740 Watt PoE Switch (Model 17108148PF2). This device is a fully managed rack-mountable Ethernet switch designed for enterprise-class networking, offering 48 PoE+ ports and 4 10-Gigabit SFP+ ports for high-speed connectivity. It is suitable for powering network devices such as IP phones, security cameras, and wireless access points.

2. Sigurnosne informacije

Pridržavajte se sljedećih sigurnosnih mjera opreza kako biste spriječili ozljede i oštećenje opreme:

• Osigurajte ispravno uzemljenje uređaja.
• Ne koristite prekidač u okruženjima s prekomjernom vlagom ili ekstremnim temperaturama.
• Koristite samo napajanje koje je isporučio ili odredio proizvođač.
• Izbjegavajte blokiranje ventilacijskih otvora kako biste spriječili pregrijavanje.
• Sav servis prepustite kvalifikovanom osoblju.

3. Sadržaj paketa

Provjerite da li vaš paket sadrži sljedeće stavke:

• ADTRAN NetVanta 1560-48-Port PoE Switch (Model 17108148PF2)
• Kabl za napajanje
• Komplet za montažu u rack
• Dokumentacija (Vodič za brzi početak, Sigurnosne informacije)

Ako bilo koji artikl nedostaje ili je oštećen, odmah se obratite svom prodavaču.

4. Fizički opis

The NetVanta 1560-48 is a standard 1U rack-mountable unit. Its front panel features network ports and status indicators, while the rear panel typically includes the power input and cooling fans.

4.1 Prednja ploča

Figure 1: Front Panel of the NetVanta 1560-48 Switch

This image displays the front panel of the Adtran NetVanta 1560-48-Port PoE Switch. It features 48 RJ45 Ethernet ports, arranged in two rows, and four 10-Gigabit SFP+ uplink ports on the right side. Status indicator LEDs (Power, System, Link/Act, Speed, PoE) are visible on the left, along with a console port and a USB port.

4.1.1 portova

• 48 x 10/100/1000Base-T Ethernet Ports: RJ45 connectors supporting Power over Ethernet Plus (PoE+).
• 4 x 10-Gigabit SFP+ Ports: For high-speed fiber uplink connections.
• Konzolni port: RJ45 for local management access.
• USB port: For firmware upgrades or configuration backup/restore.

4.1.2 LED indikatori

• LED za napajanje: Označava status napajanja.
• Sistemska LED dioda: Označava operativni status sistema.
• LED diode za povezivanje/aktivnost (po portu): Označava mrežnu vezu i aktivnost.
• LED diode za brzinu (po portu): Indicates connection speed (e.g., 100Mbps, 1Gbps).
• PoE LEDs (per port): Indicates PoE status for the respective port.

5. Postavljanje i instalacija

Follow these steps to properly install and connect your NetVanta 1560-48 switch.

5.1 Montaža u stalak

1. Attach the provided rack-mount brackets to the sides of the switch using the included screws.
2. Pričvrstite prekidač u standardni 19-inčni nosač opreme pomoću odgovarajućih vijaka za nosač.

5.2 Priključak za napajanje

1. Spojite kabel za napajanje na AC priključak na stražnjoj ploči prekidača.
2. Uključite drugi kraj kabla za napajanje u uzemljenu električnu utičnicu.
3. Provjerite da li LED lampica za napajanje na prednjoj ploči svijetli.

5.3 Mrežne veze

1. Connect Ethernet cables from your network devices (e.g., computers, IP phones, access points) to the RJ45 ports on the switch.
2. For high-speed uplinks, insert compatible SFP+ transceivers into the SFP+ ports and connect fiber optic cables.
3. Observe the Link/Act and Speed LEDs to confirm successful connections.

6. Uputstvo za upotrebu

The NetVanta 1560-48 is a managed switch, offering various configuration and monitoring options.

6.1 Početni pristup

The switch can be accessed via a Command Line Interface (CLI) through the console port or via a webGrafički korisnički interfejs (GUI) zasnovan na -.

• Pristup preko CLI-ja: Connect a serial cable from your computer to the switch's console port. Use a terminal emulation program (e.g., PuTTY) with settings: 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control.
• Web GUI pristup: By default, the switch may obtain an IP address via DHCP or have a default static IP. Refer to the Quick Start Guide for the default IP address or DHCP discovery method. Access the GUI by entering the switch's IP address into a web pretraživač.

6.2 Osnovna konfiguracija

Upon initial access, it is recommended to:

• Change the default administrator password.
• Configure the management IP address.
• Podesite sistemsko vreme i datum.
• Enable necessary management protocols (e.g., SNMP, SSH, HTTPS).

6.3 Rad PoE-a

The switch provides 740 Watts of total PoE+ power. Connected PoE-compatible devices will automatically receive power upon connection, provided the port is enabled for PoE and sufficient power is available.

• Monitor PoE status via the front panel LEDs or the management interface.
• Configure PoE settings (e.g., power priority, power limits) through the switch's management interface.

7. Održavanje

Redovno održavanje osigurava optimalne performanse i dugotrajnost vašeg prekidača.

7.1 Ažuriranja firmvera

Periodično provjeravajte ADTRAN podršku website for the latest firmware versions. Firmware updates can provide new features, performance enhancements, and security patches. Follow the instructions provided with the firmware package for a safe update process.

7.2 Čišćenje

• Prije čišćenja provjerite je li prekidač isključen i odvojen od izvora napajanja.
• Koristite meku, suhu krpu za brisanje vanjske strane prekidača.
• Use compressed air to clear dust from ventilation openings and ports.
• Nemojte koristiti tečna ili aerosolna sredstva za čišćenje.

7.3 Razmatranja životne sredine

Održavajte radno okruženje unutar specificiranih raspona temperature i vlažnosti kako biste spriječili kvar hardvera.

8. Otkrivanje problema

Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti.

8.1 Nema napajanja

• Simptom: LED za napajanje je isključen.
• Akcija:
  • Provjerite je li kabel za napajanje sigurno spojen i na prekidač i na utičnicu.
  • Provjerite utičnicu s drugim uređajem kako biste se uvjerili da je funkcionalna.
  • Provjerite je li prekidač za napajanje (ako postoji) u položaju 'UKLJUČENO'.

8.2 Nema mrežne veze

• Simptom: Link/Act LED for a port is off.
• Akcija:
  • Provjerite je li Ethernet kabel pravilno spojen na oba kraja.
  • Pokušajte s drugim Ethernet kabelom.
  • Provjerite je li povezani uređaj uključen i ispravno funkcionira.
  • Check port configuration in the switch's management interface.

8.3 PoE Device Not Powering On

• Simptom: PoE-compatible device does not receive power.
• Akcija:
  • Verify the device is PoE-compatible (802.3af/at).
  • Check the PoE LED for the port; if off, ensure PoE is enabled for that port in the switch configuration.
  • Ensure the total PoE power budget (740W) of the switch is not exceeded.
  • Pokušajte spojiti uređaj na drugi PoE port.

9. Specifikacije

Key technical specifications for the ADTRAN NetVanta 1560-48-Port PoE Switch:

10. Garancija i podrška

For warranty information and technical support, please refer to the official ADTRAN website or contact your authorized ADTRAN reseller. Keep your purchase receipt for warranty claims.

ADTRAN Support: www.adtran.com/support