Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of your Pipishell Full Motion TV Wall Mount. Please read this manual thoroughly before installation to ensure safe and correct usage. Keep this manual for future reference.
Image: The Pipishell Full Motion TV Wall Mount, showcasing its articulating arm and VESA plate.
Sigurnosne informacije
Nepravilna instalacija ili upotreba ovog proizvoda može dovesti do ozbiljnih povreda ili oštećenja. Molimo vas da se pridržavate sljedećih sigurnosnih smjernica:
- Osigurajte da površina za montažu može sigurno podnijeti ukupnu težinu nosača i televizora.
- Do not mount on drywall alone. This mount requires installation into a single wood stud, concrete wall, or block wall.
- Use all provided hardware and do not substitute parts.
- Ako niste sigurni u vezi bilo kojeg dijela procesa instalacije, obratite se kvalificiranom stručnjaku.
- Držite djecu i kućne ljubimce podalje tokom instalacije.
Image: Illustration showing compatible wall types: concrete wall, single wood stud, and block wall. A warning indicates not to mount on drywall alone.
Sadržaj paketa
Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact Pipishell customer support.
| Komponenta | Količina |
|---|---|
| Sklapanje zidne ploče | 1 |
| TV nosač | 1 |
| Mounting Hardware (screws, anchors, washers) | Asorted |
| Uputstvo za upotrebu | 1 |
Podešavanje i instalacija
Follow these steps carefully for a secure installation:
- Provjerite kompatibilnost: Before starting, ensure your TV's VESA pattern (Max: 100x100mm, Min: 75x75mm) and weight (Max: 33 lbs) are compatible with this mount.
- Pronađite položaj za montažu: Choose a suitable location on a single wood stud, concrete, or block wall. Use a stud finder to accurately locate the center of the wood stud if applicable.
- Zidna ploča za montažu: Secure the wall plate to the chosen wall type using the appropriate anchor bolts and hardware. Ensure it is level and firmly attached.
- Pričvrstite nosač za TV: Fasten the TV bracket to the back of your television using the provided screws that match your TV's VESA pattern.
- Viseći displej: Carefully lift the television with the attached bracket and hook it onto the wall plate assembly. Ensure it is securely seated.
Image: Diagram illustrating VESA mounting patterns (100x100mm, 75x75mm) and maximum load capacity of 33 lbs for TV sizes 13-26 inches.
Image: Visual guide showing three steps: 1) Mount Wall Plate, 2) Attach TV Bracket, 3) Hang Display.
Uputstvo za upotrebu
Your Pipishell Full Motion TV Wall Mount offers versatile adjustments for optimal viewing:
- Okretni: The mount allows for a swivel range of up to ±90° (depending on TV size and wall distance) to adjust the horizontal viewing kut.
- Nagib: Adjust the vertical tilt from -15° to +5° to reduce glare and find the perfect viewing kut.
- Extension & Retraction: Extend the TV up to 10.6 inches from the wall for flexible positioning or retract it to a mere 2.9 inches for a low-profile pogledajte.
- rotacija: The VESA plate can rotate 360° allowing for landscape or portrait orientation of your display.
Image: A TV mounted on the wall, illustrating the swivel motion of ±90° and the extension/retraction range of 2.9 to 10.6 inches, along with tilt angles of -15° to +5°.
Image: A diagram showing the TV mount's full motion flexibility, including 360° rotation of the VESA plate.
Održavanje
To ensure the longevity and proper function of your TV wall mount:
- Redovno provjeravajte sve vijke i spojeve kako biste bili sigurni da su čvrsto zategnuti i sigurni.
- Očistite nosač mekom, suhom krpom. Izbjegavajte abrazivna sredstva za čišćenje ili rastvarače.
- Do not hang anything from the mount other than the intended television.
Rješavanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Nosač se čini nestabilnim nakon instalacije. | Loose mounting screws or incorrect wall anchors. | Re-check all wall plate screws and ensure they are tightened into a solid stud or appropriate anchors. Refer to installation steps. |
| Teškoće s podešavanjem okretanja/nagiba. | Joints may be too tight or need lubrication. | Apply a small amount of silicone-based lubricant to the moving joints. Do not over-tighten joint bolts. |
| TV nije ravan. | Wall plate installed unevenly. | Adjust the leveling screws on the VESA plate if available, or re-install the wall plate ensuring it is perfectly level. |
Specifikacije
- Model: PIXSF2
- Brand: Pipishell
- Materijal: legirani čelik
- Boja: Crna
- Kompatibilne veličine TV-a: 13-26 inča
- Maksimalna nosivost: 33 lbs (15 kg)
- VESA kompatibilnost: 75x75mm, 100x100mm
- Vrsta pokreta: Swivel, Rotate, Tilt, Full Motion, Articulating
- Ugao nagiba: -15° do +5°
- Ugao okretanja: ±90° (max, depends on TV size)
- Produžetak od zida: 2.9 inča (uvučeno) do 10.6 inča (izvučeno)
- Dimenzije proizvoda: 38.98 x 12.6 x 5.12 inches (mount only)
- Težina artikla: 1.39 funte
Garancija i podrška
Pipishell products are designed for durability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Pipishell website.
For technical support, installation assistance, or any questions regarding your product, please contact Pipishell customer service:
- Email: support@pipishell.com
- Webstranica: www.pipishell.com
You can also find additional resources and FAQs on our website.
