GYS 059856 Mjerač debljine boje Uputstvo za upotrebu

1. Uvod

This manual provides detailed instructions for the safe and effective use of the GYS 059856 Paint Thickness Gauge. This portable device is designed for quick and easy measurement of non-magnetic coatings (such as paint or film) on metallic surfaces. It is an essential tool for various applications including the processing industry, automotive repair, metal treatment, chemical industry, and goods inspection.

Molimo vas da pažljivo pročitate ovaj priručnik prije korištenja uređaja i sačuvajte ga za buduću upotrebu.

2. Sigurnosne informacije

• Always ensure the device is clean and dry before use.
• Ne izlažite uređaj ekstremnim temperaturama, vlazi ili direktnoj sunčevoj svjetlosti.
• Izbjegavajte ispuštanje ili izlaganje uređaja jakim udarima.
• Ne pokušavajte sami rastavljati ili popravljati uređaj. Za servis se obratite kvalifikovanom osoblju.
• Držite uređaj van domašaja djece.
• Odgovorno odložite baterije u skladu s lokalnim propisima.

3. Proizvod je gotovview

The GYS 059856 Paint Thickness Gauge features a compact design with an LCD display and intuitive controls.

Slika 1: Prednja strana view of the GYS 059856 Paint Thickness Gauge. The device is yellow with a black LCD screen at the top. Below the screen are three black buttons: 'MODE' on the left, 'UNIT' on the right, and 'ZERO' with a power symbol in the center bottom.

3.1 Ključne komponente

• LCD ekran: Shows measurement readings, units, and mode indicators.
• Dugme MODE: Used to switch between measurement modes (Single, Continuous, Differential).
• Dugme UNIT: Used to switch between metric (µm) and imperial (mils) units.
• Dugme ZERO: Used for zero calibration and powering the device on/off.
• Mjerna sonda: Located at the bottom of the device, used to contact the surface for measurement.

4. Podešavanje

4.1 Instalacija baterije

Locate the battery compartment on the back of the device. Insert the required batteries, ensuring correct polarity. Close the battery compartment securely.

4.2 Uključivanje/isključivanje

Pritisnite i držite NULA button to power on the device. To power off, press and hold the NULA button again. The device also features an automatic shut-off function to conserve battery life.

5. Uputstvo za upotrebu

The GYS 059856 offers three measurement modes and supports both metric and imperial units.

5.1 Selecting Measurement Units

Pritisnite JEDINICA button to toggle between metric (µm) and imperial (mils) units.

5.2 Načini mjerenja

Pritisnite MODE button to cycle through the following measurement modes:

• Single Measurement Mode: Takes a single reading each time the probe is placed on the surface.
• Continuous Measurement Mode: Continuously takes readings as the probe is moved across the surface.
• Differential Measurement Mode: Displays the difference between the current reading and a previously set reference value.

5.3 Mjerenje

1. Ensure the surface to be measured is clean and free of debris.
2. Select the desired measurement unit and mode.
3. Place the measurement probe firmly and perpendicularly onto the coated metallic surface.
4. Read the thickness value displayed on the LCD screen.
5. Lift the device from the surface to prepare for the next measurement (in Single mode).

6. Kalibracija

Accurate measurements depend on proper calibration. The device supports three calibration functions:

6.1 Kalibracija nule

This calibration is performed on an uncoated, bare metallic surface to establish a zero reference point. Place the probe on a clean, uncoated metal surface and follow the on-screen instructions or refer to the device's specific calibration sequence (usually involving the NULA dugme).

6.2 Kalibracija u dvije tačke

This method uses two known thickness standards (e.g., a thin film and a thicker film) to calibrate the device across a range. This provides more accurate readings for varying thicknesses.

6.3 Easy Calibration

Refer to the device's specific instructions for "Easy Calibration," which may involve a simplified process for quick adjustments.

Note: Always calibrate the device before critical measurements or if you suspect inaccurate readings.

7. Održavanje

• čišćenje: Obrišite uređaj mekom, suhom krpom. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
• Skladištenje: Store the device in a dry, cool place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries.
• Njega sonde: Keep the measurement probe clean and free from scratches or damage.

8. Otkrivanje problema

9. Specifikacije

• Model: GYS 059856
• Proizvođač: gys
• Dimenzije proizvoda (D x Š x V): 10.5 x 6.1 x 2.8 cm
• Težina: 137 grama
• Princip mjerenja: Non-magnetic coating on metallic surfaces
• Mjerne jedinice: Metric (µm), Imperial (mils)
• Načini mjerenja: Single, Continuous, Differential
• Calibration Functions: Zero calibration, 2-point calibration, Easy calibration
• Automatsko isključivanje: Da
• ASIN: B09GS7G1N4
• Referenca proizvođača: 059856
• Dostupnost rezervnih dijelova: Informacije nisu dostupne

10. Garancija i podrška

For warranty information and technical support, please refer to the official GYS website or contact your local distributor. Information regarding spare parts availability is not provided in the product specifications.

GYS Official Webstranica: www.gys.fr