Herdio HCS-818BT

Herdio HCS-818BT 6.5-inčni Bluetooth stropni zvučnik - uputstvo za upotrebu

1. Uvod

Thank you for choosing Herdio HCS-818BT 6.5 Inch Bluetooth Ceiling Speakers. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new audio system. These speakers are designed to deliver high-quality, full-range stereo sound for various indoor environments such as homes, offices, bathrooms, and kitchens. Featuring Bluetooth connectivity, they allow for wireless audio streaming from compatible devices.

2. Sadržaj paketa

Molimo Vas da provjerite da li se u Vašem paketu nalaze sve dolje navedene stavke:

  • 2 x Herdio 6.5 Inch Ceiling Speakers
  • 2 x Speaker Cables (Red/Black)
  • 1 x Bluetooth Ampdizalica (AMP-BTX01)
  • 1 x 24V/3A Power Supply with AC Adapter
  • 1 x Uputstvo za upotrebu
  • 1 x Šablon za izrezivanje
  • 2 x Zaptivke
Contents of the Herdio HCS-818BT speaker package, including two ceiling speakers, speaker cables, a Bluetooth amplifier, and a power supply.

Image: All components included in the Herdio HCS-818BT speaker system package.

3. Specifikacije

FeatureSpecifikacija
Naziv modelaHCS-818BT
Vrsta zvučnika6.5 Inch 2-Way Flush Mount Ceiling Speaker
Vrsta montažeCeiling Mount
Maksimalna izlazna snaga zvučnika320 vati (po paru)
Impedansa8 Ohm
Frekvencijski odziv50Hz - 20kHz
Bežična tehnologijaBluetooth
Bluetooth dometDo 40 metara (130 stope)
Prečnik reza8.07 inča (20.5 cm)
Dubina montaže4.13 inča (10.5 cm)
Materijalakrilonitril butadien stiren (ABS)
Otpornost na voduWater Resistant (suitable for high humidity environments)
Izvor napajanjaAC (via included power supply)

4. Instalacija

4.1 Razmatranja prije instalacije

  • Ensure the mounting surface (ceiling or wall) is structurally sound and can support the weight of the speakers.
  • Verify that there are no electrical wires, pipes, or other obstructions behind the desired mounting location.
  • Turn off power to the installation area at the circuit breaker before beginning any wiring.
  • Use the provided cutout template to mark the precise location for speaker installation.

4.2 Montažne dimenzije

Accurate measurements are crucial for proper installation. The required cut-out diameter is 8.07 inča (20.5 cm), and the mounting depth is 4.13 inča (10.5 cm).

Diagram showing the installation dimensions of the Herdio ceiling speaker, including total speaker diameter, cut-out diameter, and mounting depth.

Image: Detailed dimensions for speaker installation.

4.3 Ožičenje i spajanje

Follow these steps to connect your speakers to the Bluetooth ampdizalica:

  1. Connect the speaker cables to the speakers: Ensure the red wire connects to the positive (+) terminal and the black wire to the negative (-) terminal on each speaker.
  2. Connect the speaker cables to the Bluetooth ampspasilac: The amplifier has clearly marked terminals for SPK L+ (Left Speaker Positive), SPK L- (Left Speaker Negative), SPK R+ (Right Speaker Positive), and SPK R- (Right Speaker Negative). Use a screwdriver to secure the wires.
  3. Connect the power supply: Plug the 24V/3A power supply into the 'Power Jack' input on the Bluetooth amplifier, then plug the power supply into an AC outlet.

For a visual guide on wiring and pairing, please refer to the video below:

Video: This video demonstrates the unboxing, wiring connections for the speakers and amplifier, and the Bluetooth pairing process for the Herdio HCS-818BT ceiling speakers.

4.4 Montiranje zvučnika

  1. After cutting the appropriate hole, remove the speaker grill by gently prying it off.
  2. Umetnite zvučnik u izrez.
  3. Tighten the speaker clips: Use a screwdriver to turn the screws on the speaker's mounting tabs. This will rotate the mounting clips outwards and secure the speaker firmly to the ceiling or wall.
  4. Replace the speaker grill: Once the speaker is securely mounted, carefully reattach the magnetic grill.
Image showing a Herdio ceiling speaker being installed into a ceiling, with a hand tightening the mounting screws.

Image: Illustration of the speaker installation process.

5. Operacija

5.1 Bluetooth uparivanje

Jednom amplifier is powered on, its blue indicator light will blink, indicating it is in pairing mode. To connect your device:

  1. Omogućite Bluetooth na svom pametnom telefonu, tabletu ili drugom kompatibilnom uređaju.
  2. Traži dostupnim Bluetooth uređajima.
  3. Select "Herdio HCS818" from the list.
  4. Jednom povezan, amplifier's blue light will become constant, indicating a successful connection.

5.2 Reprodukcija muzike

After successful pairing, you can play audio from your connected device. Adjust the volume using your device's controls. The speakers will reproduce the audio wirelessly.

Image showing a Herdio ceiling speaker with various Bluetooth-enabled devices like a smartphone, tablet, and laptop, illustrating compatibility.

Image: Herdio speakers are compatible with a wide range of Bluetooth devices.

6. Održavanje

To ensure the longevity and optimal performance of your Herdio HCS-818BT speakers, follow these maintenance guidelines:

  • čišćenje: Gently wipe the speaker grills and surfaces with a soft, dry cloth. Do not use harsh chemicals, solvents, or abrasive cleaners.
  • Okruženje: While the speakers are water-resistant and suitable for high-humidity environments, avoid direct exposure to water or extreme temperatures.
  • Veze: Periodically check all wiring connections to ensure they are secure. Loose connections can affect sound quality.
  • Skladištenje: If storing the speakers for an extended period, ensure they are in a cool, dry place, protected from dust and physical damage.

7. Otkrivanje problema

If you encounter issues with your Herdio HCS-818BT speakers, refer to the following common troubleshooting steps:

ProblemMogući uzrokRješenje
Nema zvuka iz zvučnikaPower not connected; loose speaker wires; Bluetooth not paired.Ensure power supply is plugged in. Check all speaker wire connections at both the speaker and amplifier. Re-pair Bluetooth device.
Bluetooth se ne povezujeAmplifier not in pairing mode; device too far; interference.Osigurati amplifier is powered on and blue light is blinking. Move device closer to the amplifier. Turn off other Bluetooth devices nearby.
Poor sound quality (distortion, low volume)Incorrect wiring; volume too high/low; source audio quality.Verify speaker wire polarity (+ to + and - to -). Adjust volume on both the source device and amplifier. Test with different audio sources.
Isprekidan zvukLoose connections; Bluetooth range issues; interference.Check all wiring connections. Ensure Bluetooth device is within the 40-meter range. Minimize other wireless interference.

8. Garancija i podrška

Herdio HCS-818BT speakers come with a limited warranty. For specific warranty terms and conditions, please refer to the warranty information provided with your purchase or contact Herdio customer support. For technical assistance or further inquiries, please reach out to Herdio Direct, the seller, or visit the official Herdio website.

Official Herdio Webstranica: www.herdiotech.com

Povezani dokumenti - HCS-818BT

Preview Herdio Home Bluetooth stropni/zidni zvučnici s dvostrukim mikrofonom AmpProgram ožičenja sistema lifier
Ovaj dokument opisuje program ožičenja i Bluetooth operacije za Herdio Home Bluetooth zvučnike za ugradnju u plafon/zid, sa dvostrukim... ampsistem za povezivanje zvučnika. Pruža detaljna uputstva za povezivanje zvučnika, ampkutije za spašavanje i adaptere za napajanje, zajedno s uputama o uparivanju Bluetooth uređaja.
Preview Herdio visokoperformansni zvučnici za ugradnju u plafon/zid - uputstvo za upotrebu i uputstvo za instalaciju
Ovaj dokument pruža upute za instalaciju, tehničke specifikacije i informacije o garanciji za Herdio visokoperformansne sisteme zvučnika za ugradnju u plafon i zid, uključujući modele poput HCS418, HCS528, HCS628 i HCS828, sa i bez Bluetooth povezivosti.
Preview Herdio vodootporni zvučnici za unutrašnju i vanjsku upotrebu - uputstvo za upotrebu HOS-401 HOS-501 HOS-601
Ovaj korisnički priručnik pruža detaljne upute za vodootporne zvučnike za unutrašnju/vanjsku upotrebu Herdio HOS-401, HOS-501 i HOS-601, koje obuhvataju instalaciju, ožičenje, podešavanje, specifikacije i informacije o garanciji.
Preview Herdio Univerzalni Bluetooth Amplified Box AMP-BTX01 Korisnički priručnik
Ovaj dokument pruža važne sigurnosne mjere opreza, upute za korištenje Bluetootha i tehničke specifikacije za Herdio Universal Bluetooth. Amplified Box AMP-BTX01. Također uključuje informacije o garanciji i vodiče za instalaciju za različite modele Herdio zvučnika.
Preview Herdio 1618 Ugradbeni Bluetooth audio AmpSistem prijemnika Liferier - Korisnički priručnik i specifikacije
Detaljan korisnički priručnik i tehničke specifikacije za Herdio 1618 ugradbeni/zidni BT audio kontroler AmpPrijemni sistem Liferier (Model 2AYZ2-1618). Saznajte više o funkcijama, instalaciji, napajanju, Bluetooth uparivanju i FCC usklađenosti.
Preview Herdio HWA16BT Ploča za ugradnju u zid/zid BT Audio Control AmpUputstvo za sistem prijemnika za spašavanje
Korisnički priručnik za Herdio HWA16BT Ugradbenu/zidnu ploču za montažu BT audio kontrolu AmpLiferijev prijemni sistem, detaljni opis funkcija, povezivosti, specifikacija i uputa za podešavanje Bluetooth uparivanja.