REBEL RB-0003 3-in-1 Detector User Manual

Model: RB-0003

1. Uvod

Thank you for choosing the REBEL RB-0003 3-in-1 Detector. This device is designed to assist you in safely locating metal, wood, and live AC cables hidden within walls, ceilings, and floors. Please read this manual thoroughly before operating the device to ensure safe and effective use.

The RB-0003 is an essential tool for DIY enthusiasts and professionals, providing accurate detection to prevent damage during drilling, cutting, or renovation projects.

2. Sigurnosne informacije

Always exercise caution when working near detected objects.
Do not rely solely on the detector for safety. Always verify findings with other methods if possible, especially when dealing with electrical wires.
Uređaj držite suhim i čistim. Ne izlažite ga vlazi ili ekstremnim temperaturama.
Ne pokušavajte otvarati ili modificirati uređaj. Popravke treba obavljati samo kvalificirano osoblje.
Uklonite baterije ako se uređaj neće koristiti duži period.

3. Proizvod je gotovview

Familiarize yourself with the components of your REBEL RB-0003 detector:

REBEL RB-0003 3-in-1 Detector in its retail packaging, showing the front of the device with its display and 'SELECT' button.

Slika 1: Prednja strana view of the REBEL RB-0003 Detector in packaging. The device features a large display and a 'SELECT' button for mode switching.

Back of the REBEL RB-0003 3-in-1 Detector, showing the battery compartment cover and product label with model number MIE-RB-0003.

Slika 2: Pozadi view of the REBEL RB-0003 Detector. This view shows the battery compartment and the product information label.

Zaslon: Shows detection mode, signal strength, and low battery indicator. (Display size: 51 x 25 mm)
Dugme SELECT: Used to switch between detection modes (Metal, Wood, AC Cable).
Područje senzora: Located on the back of the device, this area must be flush against the surface for accurate readings.
Pretinac za baterije: Located on the back, for battery installation.

4. Podešavanje

4.1. Instalacija baterije

Open the battery compartment cover on the back of the device (refer to Figure 2).
Insert the required batteries, ensuring correct polarity (+/-). The device requires batteries for operation.
Čvrsto zatvorite poklopac odeljka za baterije.

The device features a low battery indicator on the display. Replace batteries promptly when this indicator appears to ensure accurate readings.

5. Uputstvo za upotrebu

5.1. Opći rad

Press the power button (if available, otherwise the SELECT button usually powers it on) to turn on the device.
Pritisnite SELECT button to cycle through the detection modes: Metal, Wood, and AC Cable. The selected mode will be indicated on the display.
Place the detector flat against the surface you wish to scan. Ensure the sensor area is in full contact.
Slowly slide the detector across the surface. The display will show signal strength and indicate when an object is detected.

5.2. Detekcija metala

In Metal detection mode, the RB-0003 can detect metal parts in walls up to a depth of 30 mm.

Select the Metal detection mode.
Move the device slowly across the surface. The display will show increasing bars as it approaches a metal object.
A distinct audio alert or visual indicator will confirm the presence of metal.

5.3. Wood Detection

The device can detect wooden profiles with a maximum dimension of 30 x 30 mm at a depth of 18 mm.

Switch to Wood detection mode.
Scan the wall slowly. The detector will indicate the edges and center of wooden studs or beams.
Mark the detected areas for reference.

5.4. AC Cable Detection

The RB-0003 is capable of detecting live AC 90-250V cables.

Select the AC Cable detection mode.
Move the detector slowly over the area. The device will emit a warning and display an icon when live AC voltage je otkriven.
Oprez: Always assume wires are live until confirmed otherwise by a qualified electrician.

6. Održavanje

čišćenje: Obrišite uređaj mekom, suhom krpom. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
Skladištenje: Store the detector in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
Zamjena baterije: Replace batteries when the low battery indicator appears on the display. Use only the specified battery type.

7. Otkrivanje problema

Problem	Mogući uzrok	Rješenje
Uređaj se ne uključuje.	Prazne ili nepravilno instalirane baterije.	Provjerite polaritet baterija ili zamijenite baterije.
Netačna očitavanja.	Low battery, improper contact with surface, or environmental interference.	Replace batteries. Ensure the device is flat against the surface. Avoid scanning near strong electromagnetic fields.
Nema detekcije u AC režimu.	Wires are not live, or too deep.	Ensure power is on to the circuit. Scan slowly and thoroughly.

8. Specifikacije

Feature	Detalj
Broj modela	RB-0003 (MIE-RB-0003)
Brand	REBEL
Dubina detekcije metala	Do 30 mm
Dubina detekcije drveta	Up to 18 mm (for 30x30 mm profiles)
AC Cable Detection	90-250V
Veličina ekrana	51 x 25 mm
Indikator slabe baterije	Da
Izvor napajanja	Battery Powered
Dimenzije proizvoda	15.5 x 5.4 x 2.7 cm
Težina artikla	157 grama
Međunarodna ocjena zaštite	IP66

9. Garancija i podrška

REBEL products are manufactured to high-quality standards and are guaranteed against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official REBEL website.

For technical support, troubleshooting assistance, or spare parts, please contact your local REBEL dealer or customer service department. Contact information can typically be found on the product packaging or the official REBEL website.