Uvod
The NVX XMICROLOC4 is a 4-channel line output converter designed to seamlessly integrate aftermarket amplifiers with factory OEM (Original Equipment Manufacturer) stereo systems. This device allows you to add an amplifier to your vehicle's existing audio setup without replacing the factory head unit, providing enhanced sound quality and power for your car audio system.
Ključne karakteristike
- High-Powered 4-Channel Output Converter: The NVX XMICROLOC4 is a 4-channel, 600W line output converter (150W per channel) designed to integrate aftermarket amplifiers with factory OEM stereos.
- Premium Audio Performance: Equipped with a premium input circuit that corrects crossover distortion, this converter ensures clear, accurate signal conversion for optimal sound quality.
- Adjustable Outputs for Custom Tuning: The 6:1 step-down ratio with individual adjustable outputs allows for precise control over the audio signal, enabling fine-tuning for balanced sound.
- Built-in Remote Turn-On Trigger: A 12-volt output for amplifier remote turn-on is integrated, enabling easy amplifier activation whenever the stereo is powered on.
- Compact & Easy Installation: The compact design allows for easy installation in tight spaces, making it a practical solution for adding an amplifier to a factory system.
Product Overview
Slika 1: Glavni proizvod view of the NVX XMICROLOC4, showing the top panel with the NVX logo, gain adjustment screws, and the multi-color wiring harness extending from the unit.
Slika 2: Top view of the NVX XMICROLOC4, highlighting the four blue gain adjustment screws (labeled 'L' for left and 'R' for right channels) and the NVX branding.
Slika 3: Side view of the NVX XMICROLOC4, clearly showing the four RCA output jacks. Two red jacks indicate right channels, and two white jacks indicate left channels for amppriključak lifiera.
Vodič za instalaciju
Sigurnosne mjere
- Always disconnect the vehicle's negative battery terminal before performing any electrical work to prevent short circuits and damage.
- Osigurajte da su svi priključci sigurni i pravilno izolirani kako biste izbjegli električne opasnosti.
- Ako niste sigurni u vezi s bilo kojim koracima instalacije, obratite se profesionalnom instalateru auto audio sistema.
Mounting the XMICROLOC4
Choose a secure, dry location within the vehicle, such as under the dashboard, behind the stereo, or in the trunk. Ensure the location is away from direct heat sources and allows for adequate ventilation. The compact design of the XMICROLOC4 facilitates installation in tight spaces.
Ožičenje
- Ulazi za nivo zvučnika: Connect the speaker wires from your factory stereo's speaker outputs to the corresponding input terminals on the XMICROLOC4's wiring harness. Ensure correct polarity (positive to positive, negative to negative) for each channel (Front Left, Front Right, Rear Left, Rear Right). Refer to your vehicle's wiring diagram for speaker wire identification.
- RCA izlazi: Connect RCA cables from the XMICROLOC4's RCA output jacks to the input jacks of your aftermarket amplifier. Match the front outputs of the XMICROLOC4 to the front inputs of the amplifier, and the rear outputs to the rear inputs.
- Daljinsko uključivanje: Connect the blue 12-volt remote output wire from the XMICROLOC4's harness to the remote turn-on input terminal of your amplifier. This connection will automatically activate your amplifier when the factory stereo is turned on.
- uzemljenje: Connect the black ground wire from the XMICROLOC4's harness to a clean, unpainted metal surface on the vehicle chassis. A solid ground connection is crucial for optimal performance and to prevent noise.
Uputstvo za upotrebu
Gain Adjustment
The NVX XMICROLOC4 features individual adjustable outputs for each channel, allowing for precise control over the audio signal level. After completing the installation and reconnecting the vehicle's battery:
- Turn on your factory stereo and aftermarket amplifier.
- Set the volume on your factory stereo to approximately 75% of its maximum level.
- Using a small flat-head screwdriver, slowly adjust the gain controls on the top of the XMICROLOC4 (labeled 'L' and 'R' for each channel pair). Start with the lowest gain setting and gradually increase it until the desired output level is achieved without any audible distortion.
- The 6:1 step-down ratio helps manage signal levels effectively, ensuring a clean signal to your ampspašivač. Podesite amplifier's gain settings as needed after setting the XMICROLOC4's gains.
Specifikacije
Slika 4: Diagram illustrating the dimensions and key specifications of the NVX XMICROLOC4.
| Feature | Specifikacija |
|---|---|
| Model | XMICROLOC4 |
| Kanali | 4-kanalni |
| Power Handling | 600 W (150 W po kanalu) |
| Voltage | 12 Volts |
| Minimalna ponuda Voltage | 12 Volts |
| Step-down Ratio | 6:1 |
| Vrsta montaže | Surface Mount |
| Posebne karakteristike | Premium Input Circuit, Individual Adjustable Outputs, 12-Volt Remote Turn-On Output |
Rješavanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Nema zvuka iz ampLifier/zvučnici |
|
|
| Izobličen ili nejasan zvuk |
|
|
| AmpLifier se ne uključuje |
|
|
Održavanje
The NVX XMICROLOC4 is designed for reliable operation with minimal maintenance. To ensure its longevity and optimal performance:
- Uređaj držite čistim od prašine i ostataka. Za čišćenje koristite meku, suhu krpu.
- Izbjegavajte izlaganje uređaja prekomjernoj vlazi ili ekstremnim temperaturama.
- Povremeno provjeravajte sve ožičenja kako biste bili sigurni da su sigurna.
Garancija i podrška
For information regarding warranty coverage, technical support, or service inquiries, please refer to the official NVX website or contact NVX customer support directly. Keep your purchase receipt as proof of purchase for any warranty claims.
