HOBBYWING Xerun XD10 Pro

HOBBYWING Xerun XD10 Pro ESC Instruction Manual

Model: Xerun XD10 Pro

Uvod

Thank you for choosing the HOBBYWING Xerun XD10 Pro Electronic Speed Controller (ESC). This high-performance sensored brushless ESC is designed to enhance your experience with Hobbywing brushless power systems. Please read this manual thoroughly before use to ensure proper setup and safe operation.

Važna sigurnosna upozorenja:

  • To prevent short circuits, ensure all wires and connections are well insulated before connecting the ESC to related devices.
  • Ensure all devices are securely connected to avoid poor connections and potential damage to electronic components.
  • Uvijek review the manuals for all power devices and chassis to confirm a rational power configuration before operating this unit.

Setup

Ožičenje i priključci

Use a soldering iron with a minimum power of 60W to solder all input/output wires and connectors. Proper soldering ensures reliable electrical connections.

BEC Output Configuration

The ESC features a built-in switch mode BEC with a maximum output of 10A. The voltage is adjustable from 5V to 7.4V in 0.1V steps, accommodating various servos and other devices requiring different voltages.

PRG/FAN Port Usage

A dedicated PRG/FAN port allows for connecting an external cooling fan to maximize performance or for connecting an LCD program box or WiFi module for advanced programming.

HOBBYWING Xerun XD10 Pro Electronic Speed Controller

Image of the HOBBYWING Xerun XD10 Pro Electronic Speed Controller.

Uputstvo za upotrebu

Driving and Braking Force Regulation

The ESC allows for variable frequency regulation of PWM and brake frequencies. This feature enables users to precisely control the driving and braking forces of the motors, optimizing performance for different conditions.

Operativna sigurnost

  • Avoid Free Revving: Do not hold the vehicle in the air and rev it to full throttle. Rubber tires can expand to extreme sizes or even crack, potentially causing serious injury.
  • Praćenje temperature: Discontinue use immediately if the ESC casing temperature exceeds 90°C (194°F). Prolonged operation above this temperature can damage both the ESC and the motor.
  • Thermal Protection Setting: Hobbywing recommends setting the 'ESC Thermal Protection' to 105°C (221°F). This refers to the internal temperature of the ESC.

Ažuriranja firmvera

Firmware upgrades can be performed using a Hobbywing multifunction LCD program box or an OTA Programmer (sold separately).

Održavanje

Isključivanje baterije

Always disconnect the batteries after each use. If the ESC remains connected to the batteries, it continuously consumes current, even when turned off. This can lead to complete discharge of the battery and potential damage to both the battery and the ESC if left connected for extended periods.

Rješavanje problema i zaštita

Ugrađene zaštite

The Xerun XD10 Pro ESC incorporates multiple protection features to safeguard your system:

  • Low-voltagZaštita od prekida
  • ESC and motor thermal protection
  • Fail-safe (throttle signal loss protection)
  • Reverse polarity protection (Note: The external standard capacitor pack may still be damaged if battery reversal occurs.)

Zapisivanje podataka

The ESC supports data logging, which records the maximum ESC/motor temperature, motor speed/RPM, and other relevant data in real-time. This information can be valuable for diagnosing performance issues and optimizing settings.

Specifikacije

FeatureSpecifikacija
Kontinuirana/vršna struja100A/800A
LiPo/NiMH ćelije2S LiPo / 4-6S NiMH
BEC izlaz5-7.4V Adjustable, 5A Continuous (Switch-mode)
Radna temperaturaDo 105°C (221°F)
Dimenzije proizvoda4 x 2 x 4 inča
Težina artikla7.2 unce (0.45 funte)
MaterijalPlastika
ProizvođačHobistička tehnologija
UPC/GTIN088718508605

Informacije o garanciji

Please note that damage resulting from continuous battery connection after use, leading to complete discharge, will not be covered under warranty. Always disconnect batteries when the ESC is not in use.

Podrška

For further assistance, technical support, or inquiries regarding your HOBBYWING Xerun XD10 Pro ESC, please contact your retailer or the official HOBBYWING support channels.

Povezani dokumenti - Xerun XD10 Pro

Preview Hobbywing XERUN XD10 Pro ESC uputstvo za upotrebu
Sveobuhvatno korisničko uputstvo za Hobbywing XERUN XD10 Pro elektronski regulator brzine bez četkica, koje obuhvata podešavanje, programiranje, karakteristike, specifikacije i rješavanje problema za RC vozila.
Preview Hobbywing XERUN XD10 Pro Brushless Electronic Speed Controller User Manual
Comprehensive user manual for the Hobbywing XERUN XD10 Pro Brushless Electronic Speed Controller, covering features, specifications, connections, ESC setup, programming, LED status, and troubleshooting.
Preview HOBBYWING XERUN XR8 PRO G3 Uputstvo za upotrebu ESC-a bez četkica
Sveobuhvatno korisničko uputstvo za HOBBYWING XERUN XR8 PRO G3 elektronski regulator brzine bez četkica, koje obuhvata podešavanje, programiranje, specifikacije i rješavanje problema.
Preview Hobbywing Xerun XR8 Pro G2 ESC User Manual: Setup, Features & Troubleshooting
Comprehensive user manual for the Hobbywing Xerun XR8 Pro G2 brushless electronic speed controller, covering setup, programming, features, specifications, and troubleshooting for RC vehicles.
Preview Hobbywing Xerun XR10 Pro DR ESC Uputstvo za upotrebu - Elektronski regulator brzine bez četkica Drag Racing
Comprehensive user manual for the Hobbywing Xerun XR10 Pro DR 200A Brushless Electronic Speed Controller, detailing features, specifications, connections, setup, programmable items, LED status explanation, and troubleshooting for drag racing applications.
Preview Hobbywing XeRun XR10 Justock G3S ESC User Manual
User manual for the Hobbywing XeRun XR10 Justock G3S Brushless Electronic Speed Controller (ESC). Provides detailed information on features, specifications, setup, programming, connections, and troubleshooting for RC vehicle enthusiasts.