WilTec Telescopic Bike Rack

1. Uvod

This manual provides essential information for the safe and efficient installation and use of your WilTec Telescopic Bike Rack. Designed to store two bicycles in a space-saving manner, this rack is ideal for garages, cellars, and other confined spaces, helping to keep your floor clear and organized. Please read these instructions carefully before assembly and use, and retain them for future reference.

2. Sigurnosne informacije

• Maksimalna nosivost: The rack supports up to 20 kg (44 lbs) per bicycle, with a total maximum load capacity of 40 kg (88 lbs). Do not exceed these limits.
• Stabilna instalacija: Ensure the telescopic pole is securely fixed between the floor and ceiling. The anti-slip ends must be firmly pressed against both surfaces.
• Razmak od zida: Maintain sufficient distance from the wall to prevent bicycles from scratching or dirtying it.
• Bicycle Compatibility: The fixing hooks are suitable for bicycle frames with a maximum diameter of 50 mm.
• Redovni pregled: Periodically check all connections and adjustments to ensure the rack remains stable and secure.

3. Components Overview

Familiarize yourself with the main components of your bike rack:

• Telescopic Pole (main vertical support)
• Adjustable Support Arms (two sets, each with two hooks)
• Anti-slip End Caps (for floor and ceiling contact)
• Mounting Hardware (screws, Allen key for securing arms)

Slika 1: Sveukupno view of the telescopic bike rack with dimensions. The pole is adjustable from 160 cm to 340 cm in height. The base has a diameter of 118 mm, and the top cap has a diameter of 100 mm.

4. Upute za postavljanje

Slijedite ove korake za pravilno sastavljanje i instalaciju:

1. Sastavite štap: Connect the sections of the telescopic pole. Ensure all connections are firm.
2. Postavite motku: Place the assembled pole vertically between your desired floor and ceiling location. The anti-slip end caps should be at both ends.
3. Adjust Height and Secure: Extend the telescopic pole until it is firmly pressed against the floor and ceiling. The anti-slip ends (Figure 2) provide a secure grip on various surfaces. No drilling is required for installation.


Figure 2: Detail of the anti-slip top and bottom caps ensuring stability.

4. Attach Support Arms: Slide the support arms onto the telescopic pole. Each arm consists of two hooks.
5. Podesite položaj ruke: The support arms are adjustable in height and can swivel 360 degrees (Figure 3). Adjust them to the desired height and angle to accommodate your bicycles. Secure them in place using the provided screws and Allen key.


Figure 3: The support arms feature a 360-degree swivel mechanism for flexible positioning.

6. Osigurajte ruke: Tighten the screws on the support arms to prevent them from sliding or rotating unintentionally.

5. Uputstvo za upotrebu

To safely store your bicycles on the rack:

1. Pripremite udice: Ensure the hooks on the support arms are positioned correctly to cradle your bicycle frame. The hooks are adjustable in width to fit frames up to 50 mm in diameter (Figure 4).


Figure 4: The hooks can be adjusted horizontally to fit various bike frame sizes.

2. Mount the First Bicycle: Carefully lift your first bicycle and place its frame onto the hooks of one set of support arms. Ensure the bicycle is balanced and stable.
3. Mount the Second Bicycle: Repeat the process for the second bicycle on the other set of support arms. It is recommended to place heavier bikes on the lower arms for better stability.

Slika 5: Prample of two bicycles securely mounted on the rack.
4. Provjerite stabilnost: After mounting both bicycles, gently shake the rack to confirm its stability. If there is any wobbling, re-check the pole's tension and the arm's tightness.

6. Održavanje

• čišćenje: Wipe down the aluminum pole and plastic components with a damp tkanina. Izbjegavajte abrazivna sredstva za čišćenje.
• Redovne provjere: Periodically inspect the telescopic mechanism, support arm connections, and anti-slip end caps for any signs of wear or damage. Tighten any loose screws.
• podmazivanje: If the telescopic mechanism becomes stiff, apply a small amount of silicone-based lubricant to the sliding parts.

7. Otkrivanje problema

• Rack is Unstable: Ensure the telescopic pole is fully extended and firmly secured between the floor and ceiling. Check that the anti-slip end caps are making full contact and are not damaged.
• Support Arms Slide Down: Tighten the screws on the support arms using the provided Allen key. Ensure the bicycle weight does not exceed the 20 kg per arm limit.
• Teškoće s podešavanjem visine: Check for any obstructions or debris in the telescopic mechanism. Clean and lubricate if necessary.

8. Specifikacije

9. Garancija i podrška

This WilTec product comes with standard legal guarantees. For any questions, issues, or support needs, please contact Wiltec Wildanger Technik GmbH directly. They offer specialized customer support and a 30-day return policy.

Za više informacija posjetite stranicu WilTec prodavnica robne marke.