Hyper Tough 20886

Hyper Tough 300-Lumen LED Headlamp

Model: 20886 Korisnički priručnik

1. Uvod

Thank you for choosing the Hyper Tough 300-Lumen LED Headlamp. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your headlampMolimo vas da pažljivo pročitate ovaj priručnik prije upotrebe i sačuvate ga za buduću upotrebu.

2. Sigurnosne informacije

  • Sigurnost baterije: Always insert batteries correctly, observing polarity (+/-). Do not mix old and new batteries, or different types of batteries. Remove batteries if the headlamp will not be used for an extended period. Dispose of used batteries responsibly.
  • Sigurnost oka: Do not shine the light directly into eyes, as it can cause temporary vision impairment or damage.
  • toplina: The LED light source may become warm during prolonged use. Avoid direct contact with the light housing when operating for extended periods.
  • Otpornost na vodu: Ova glavaamp is IPX4 water-resistant, meaning it is protected against splashing water from any direction. It is not designed for submersion.
  • Uticaj: While impact-resistant, avoid dropping the headlamp from excessive heights to prevent damage.

3. Sadržaj paketa

  • Hyper Tough 300-Lumen LED Headlamp (1)
  • AAA baterije (3)

4. Proizvod je gotovview

The Hyper Tough 300-Lumen LED Headlamp features a versatile lighting system with both spot and flood modes, controlled by a variable light output dial. It is designed for hands-free illumination in various environments.

Hyper Tough 300-Lumen LED Headlamp, overall view

Slika 1: Sveukupno view of the Hyper Tough 300-Lumen LED Headlamp, na kojoj su prikazani glavna svjetlosna jedinica, podesivi remen i zadnji baterijski paket.

Close-up of the variable light output dial on the Hyper Tough headlamp

Slika 2: Close-up of the variable light output dial, located on the side of the headlamp unit, used for mode and brightness selection.

5. Podešavanje

5.1 Instalacija baterije

  1. Locate the battery compartment at the rear of the head strap.
  2. Otvorite poklopac odeljka za baterije.
  3. Insert three (3) AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
  4. Čvrsto zatvorite poklopac odeljka za baterije.

5.2 Podešavanje remena za glavu

Headlamp features a two-way fully adjustable head strap for a comfortable and secure fit. Adjust the elastic straps by sliding the buckles to achieve the desired tension and position on your head. The rear-mounted battery pack aids in improved weight distribution.

6. Uputstvo za upotrebu

The Hyper Tough 300-Lumen LED Headlamp offers multiple lighting modes and variable output control via a single dial.

  1. Uključivanje/isključivanje: Rotate the variable light output dial clockwise to turn the headlamp on. Continue rotating to cycle through modes and adjust brightness. Rotate counter-clockwise until it clicks to turn the headlamp off.
  2. Mode Selection and Brightness Control: The dial allows seamless transition between different light modes and brightness levels.
    • Spot Modes: As you rotate the dial clockwise from the off position, the headlamp will activate in spot mode. Continue rotating to increase brightness through Spot Low, Spot Medium, and Spot High. This mode provides a focused beam for distance illumination.
    • Način poplave: Further rotation of the dial will engage the flood mode. This mode provides a wide, uniform beam pattern, ideal for close-range work and reduced glare.
Hyper Tough headlamp illuminating in spot mode

Slika 3: Headlamp operating in a focused spot beam mode, suitable for illuminating distant objects.

Hyper Tough headlamp illuminating in flood mode

Slika 4: Headlamp operating in a wide flood beam mode, providing broad illumination for close-up tasks.

7. Održavanje

7.1 Čišćenje

Obrišite glavuamp sa mekim, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the plastic housing or lens.

7.2 Briga o bateriji i skladištenje

  • Replace batteries when the light output becomes dim or inconsistent.
  • Ako je glavaamp will not be used for an extended period (e.g., more than one month), remove the batteries to prevent leakage and corrosion.
  • Čuvajte glavuamp na hladnom i suvom mestu daleko od direktne sunčeve svetlosti.

8. Otkrivanje problema

ProblemMogući uzrokRješenje
Headlamp se ne uključuje.Baterije su prazne ili nepravilno umetnute.Zamijenite baterije novima, vodeći računa o ispravnom polaritetu.
Svjetlo je slabo ili treperi.Niska snaga baterije.Zamijenite baterije.
Brojčanik je krut ili ga je teško okretati.Prljavština ili ostaci u mehanizmu.Gently clean around the dial. Do not force rotation.

9. Specifikacije

FeatureDetalj
Broj modela20886
Light Output (Spot High)300 lumena
Run Time (Spot High)9 sata i 15 minuta
Beam Distance (Spot High)155 metara
Light Output (Spot Medium)80 lumena
Run Time (Spot Medium)32 sata i 30 minuta
Beam Distance (Spot Medium)94 metara
Light Output (Spot Low)30 lumena
Run Time (Spot Low)85 sata i 15 minuta
Beam Distance (Spot Low)59 metara
Light Output (Flood)95 lumena
Run Time (Flood)24 sati
Beam Distance (Flood)13 metara
Izvor napajanja3 x AAA baterije (uključene)
Vrsta izvora svjetlostiLED
MaterijalPlastika
Otpornost na voduIPX4 (otporan na vodu)
Otpornost na udar1-metar
Dimenzije (paket)21.1 x 17.6 x 7.9 cm
Težina (paket)256 g

10. Garancija i podrška

Specific warranty information for this product was not provided in the available data. For warranty claims or technical support, please refer to the product packaging or contact Hyper Tough customer service directly through their official webweb-stranicu ili kontaktne kanale.

Povezani dokumenti - 20886

Preview Hyper Tough HT19-401-003-11 20V Max Cordless Chain Saw Quick Start Guide
Quick start guide for the Hyper Tough HT19-401-003-11 20V Max Cordless Chain Saw, covering charging, battery installation, assembly, and safe operation procedures.
Preview Hyper Tough 1.5AMP Detail Sander Instruction Manual
Comprehensive instruction manual for the Hyper Tough 1.5AMP Detail Sander (Model AQ20021G), covering safety guidelines, operation, maintenance, specifications, and warranty information.
Preview HYPER TOUGH HT300 OBD2 Code Reader User Manual
This comprehensive user manual provides operating instructions and safety information for the HYPER TOUGH HT300 OBD2 Code Reader. Learn to troubleshoot 1996 and newer OBD2 vehicles, decode 'Check Engine' light problems, retrieve generic and manufacturer-specific codes, and display Freeze Frame Data.
Preview Hyper Tough 2.0 Amp 1/4 Sheet Sander Instruction Manual
Instruction manual for the Hyper Tough 2.0 Amp 1/4 Sheet Sander (Model AQ20019G), covering safety guidelines, tool anatomy, operation, installation, troubleshooting, maintenance, specifications, and warranty information.
Preview Hyper Tough 40V MAX 12" Cordless Self-Oiling Chainsaw: FAQs, Manual Info & Warranty
Get answers to common questions about the Hyper Tough 40V MAX 12" Cordless Self-Oiling Chainsaw (HT19-401-003-04). Learn about battery compatibility, chain assembly, oil usage, maintenance, and warranty details.
Preview Hyper Tough 20V 7.5-Inch Fan Operator's Manual
Comprehensive operator's manual for the Hyper Tough 20V 7.5-Inch Fan (Model C1005), detailing safety, operation, maintenance, and troubleshooting. Essential guide for safe and effective use.