VJOYCAR 2-Way LCD Pager Remote Control DIY Install System

Uputstvo za upotrebu bežičnog auto alarmnog sistema

Brand: VJOYCAR

Model: 2-Way LCD Pager Remote Control DIY Install System

Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your VJOYCAR Wireless Car Alarm System. This universal vehicle anti-theft security system features a 2-way LCD pager remote control, a siren horn, and integrated shock, vibration, window, door, and trunk open alarm capabilities. Designed for DIY installation, it offers advanced security without complex wiring.

Sadržaj paketa

Provjerite da li su sve komponente prisutne u vašem paketu:

Components of the VJOYCAR Wireless Car Alarm System, including the siren, two remote keys, air sensor, and antenna.

Figure 1: Included components of the VJOYCAR Wireless Car Alarm System.

Postavljanje i instalacija

The VJOYCAR Wireless Car Alarm System is designed for quick and easy DIY installation, typically taking about 5 minutes. No cutting of original car cables is required, preserving your vehicle's circuit integrity.

Siren Installation

  1. Connect the red cable of the siren to the car battery's positive (+) terminal.
  2. Connect the black cable of the siren to the car battery's negative (-) terminal.
  3. Connect the high frequency antenna to the designated connector on the siren.
  4. Securely fix the siren in a suitable location, such as near the wiper, ensuring it is stable and protected.
Diagram showing the easy DIY installation of the car alarm siren by connecting red and black cables to the car battery.

Figure 2: Simplified diagram of the siren's power connection to the car battery.

Air Pressure Sensor Setup

  1. Locate the on/off button on the car adaptor air sensor and turn it on. The LED light will flash, indicating it is active.
  2. Plug the car adaptor air sensor into your car's cigarette lighter port. The red light will flash, confirming it is working.
  3. The air sensor can be removed and hidden anywhere in the car after it is fully charged (lasts for approximately 5 days on a full charge).
Image showing the car adaptor air sensor and its battery indicator, emphasizing its portability and charging via cigarette lighter.

Figure 3: The car adaptor air sensor, designed for easy plug-and-play operation.

Video vodič za instalaciju

Video 1: Official VJOYCAR installation guide demonstrating the connection of the siren and antenna to the car battery.

Uputstvo za upotrebu

Arming and Disarming the System

Use the 2-way LCD pager remote control to arm or disarm the alarm system. When armed, the system monitors for unauthorized entry or significant vibrations.

Video 2: Demonstration of arming and disarming the alarm system using the remote control.

2-Way Pager and Long Distance Monitoring

The system features a 2-way LCD pager remote control that receives notifications from the alarm siren. The RF high-frequency antenna ensures a communication range of up to 1000 meters (in open air conditions).

Image illustrating the 1000-meter range of the 2-way pager alarm system, showing a car in a parking lot and the remote control.

Figure 4: The 2-way pager remote control provides real-time alerts over long distances.

Sensor Functionality

The system incorporates multiple sensors to detect various threats:

Two images: top shows a car door being opened with a red dot indicating air sensor detection; bottom shows a car being towed with a red dot indicating shock sensor detection.

Figure 5: Visual representation of air sensor detecting door/trunk opening and shock sensor detecting car movement.

Video 3: Demonstration of the alarm triggering when a car door is opened.

Video 4: Demonstration of the alarm triggering when the car trunk is opened.

Find Car Function

With just one click on your remote, you can activate a function to help you locate your car in a large parking area.

Image showing a car park with a red location pin indicating the 'Find Car' feature, alongside the two remote keys.

Figure 6: The 'Find Car' feature assists in locating your vehicle.

Adjusting Vibration Sensitivity

The system offers 8 levels of vibration sensitivity, from low to high. You can adjust this setting to suit your environment and prevent false alarms.

Image showing the siren and remote keys with text indicating '8 Level of vibration sensitivity' and '1-8' for adjustment.

Figure 7: Adjusting the vibration sensitivity of the alarm system.

Video 5: Guide on how to adjust the siren's sensitivity using the remote control.

Načini okidača

The alarm system supports four different trigger modes:

Image showing the siren and remote keys with text describing the '4 Kinds of Trigger Mode' and their functions.

Slika 8: Gotovoview of the four available trigger modes for the alarm system.

Održavanje

To ensure the longevity and optimal performance of your VJOYCAR Wireless Car Alarm System, follow these general maintenance guidelines:

Rješavanje problema

If you encounter issues with your VJOYCAR Wireless Car Alarm System, please consult the following common troubleshooting steps:

Problem Mogući uzrok / rješenje
Siren does not sound or stops working.
  • Provjerite napajanje: Ensure the siren is perfectly installed and both power cables (red and black) have a secure power supply from the car battery.
  • Remote Control Setting: Verify that the 2-way remote control is not set to "auto disarm" mode. In this mode, if the remote is close to the car, the siren may not sound even if the car is shaken, as it disarms automatically.
  • Način isključivanja zvuka: Check if the remote control is in "mute" mode (often activated by pressing a specific button, e.g., '#'). In mute mode, the siren will not sound, but the alarm will still notify the 2-way remote control.
  • Način aktivacije: Confirm that the vibration working mode is activated and on for both 1-way and 2-way remote controls.
  • Kontaktirajte podršku: If the issue persists, contact VJOYCAR customer support for further assistance or a potential replacement siren.
False alarms or excessive sensitivity.
  • Podesite osjetljivost: The system has 8 levels of vibration sensitivity. Adjust it to a lower level if you are experiencing too many false alarms. Refer to the "Adjusting Vibration Sensitivity" section.
  • Način okidača: Consider changing the trigger mode to one that is less sensitive to minor disturbances, such as Mode 4 which forbids vibration triggers.
Daljinski upravljač ne reaguje.
  • Provjerite bateriju: Ensure the remote control's battery is not depleted. Replace if necessary.
  • Raspon: Verify you are within the 1000-meter operating range. Obstacles like buildings can reduce effective range.

For any complex issues or if troubleshooting steps do not resolve the problem, please do not hesitate to contact VJOYCAR customer support. They can provide the latest user manual or specific assistance.

Specifikacije proizvoda

Feature Detalj
Brand VJOYCAR
Težina artikla 1.63 funte
Dimenzije paketa 7.83 x 6.3 x 3.39 inča
Bežični daljinski upravljač Da
Kompatibilni uređaji Cars (12-15V power input)
Maksimalni domet 1000 Meters (RF high frequency antenna)
Nivo buke 125 dB
Senzori Built-in shock/vibration sensor, built-in air pressure sensor
Vrsta instalacije Uradi sam (Uradi sam)

Garancija i podrška

For warranty information, technical support, or to obtain the latest version of this user manual, please contact VJOYCAR customer service through their official channels. Your satisfaction is important, and they are available to assist with any questions or concerns regarding your product.

Također se možete obratiti službenom Uputstvo za upotrebu (PDF) za dodatne detalje.

Povezani dokumenti - 2-Way LCD Pager Remote Control DIY Install System

Preview VJOYCAR X6 Bežični auto alarmni sistem: Uputstvo za instalaciju i upotrebu
Detaljan vodič za instalaciju i korištenje bežičnog auto alarmnog sistema VJOYCAR X6. Obuhvata sadržaj paketa, detaljnu instalaciju sirene, antene i senzora zraka, te sveobuhvatna uputstva za rukovanje jednosmjernim i dvosmjernim daljinskim upravljačima, uključujući postavke okidača i podešavanja osjetljivosti.
Preview T10 Korisnički vodič: Karakteristike, specifikacije i rad
Sveobuhvatni korisnički vodič za GPS uređaj za praćenje T10. Saznajte više o njegovim karakteristikama, hardverskim specifikacijama, instalaciji, SMS naredbama za praćenje, daljinskom slušanju, upozorenjima i upravljanju napajanjem.
Preview V70 OBD automobilski računar - uputstvo za upotrebu
Korisnički priručnik za V70 OBD računarski mjerač automobila, s detaljnim opisom proizvodnje, specifikacijama, postavkama rada, ažuriranjima softvera, parametrima toka podataka i servisnim procedurama.
Preview Tehničke specifikacije i korisnički vodič za VJOYCAR GPS HUD
Detaljne tehničke specifikacije, upute za upotrebu i informacije o garanciji za VJOYCAR GPS Head-Up Display (HUD) za automobile i kamione. Saznajte više o njegovim karakteristikama, zahtjevima za napajanje, uvjetima rada i politici garancije.
Preview Korisnički priručnik za GPS praćenje vozila - VJOYCAR
Sveobuhvatni korisnički vodič za VJOYCAR GPS uređaj za praćenje vozila (verzija V2.1), koji pokriva instalaciju, podešavanje, rad, upravljanje alarmom i rješavanje problema.
Preview VJOYCAR W02 5.5" Head Up Display (HUD) Korisnički priručnik - Instalacija, postavke i rad
Sveobuhvatno korisničko uputstvo za VJOYCAR W02 5.5-inčni OBDII Head Up Display (HUD). Ovo uputstvo obuhvata instalaciju, glavne karakteristike, detaljna podešavanja, uobičajene postupke rada, rješavanje uobičajenih problema i tehničke specifikacije za sigurnu i udobnu vožnju.