1. Važna sigurnosna uputstva
Read and understand all safety warnings and instructions before operating this plasma cutter. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.
- Električni šok: Plasma cutting involves high voltage. Always ensure proper grounding. Do not operate in wet conditions. Wear dry gloves and protective clothing.
- Isparenja i gasovi: Cutting operations produce fumes and gases that can be hazardous to health. Work in a well-ventilated area or use a fume extractor.
- lučni zraci: Plasma arc rays can burn eyes and skin. Always wear a welding helmet with appropriate shade, safety glasses, and protective clothing.
- Požar i eksplozija: Varnice i vrući metal mogu izazvati požar. Držite zapaljive materijale dalje od područja rezanja. Imajte aparat za gašenje požara pri ruci.
- buka: Visok nivo buke može oštetiti sluh. Nosite zaštitu za uši.
- Vrući dijelovi: Torch and workpieces become hot. Allow them to cool before handling.
2. Sadržaj paketa
Provjerite da li su sve stavke prisutne u paketu:
- Reboot RBC-4000 Plasma Cutter Unit
- PT31 Cutting Torch (13 ft cable)
- Zemlja Clamp (6.56 stopa kabla)
- Air Hose (6.5 ft)
- Air Pressure Valve (Regulator)
- Consumables (SHEDED-CUP, TIP-EXTENDED, GAS RING, ELECTRODE-EXTENDED)
Image: The complete package contents, including the plasma cutter unit, PT31 cutting torch, earth clamp, air hose, air pressure valve, and various consumables.
3. Proizvod je gotovview
3.1 Kontrole i veze na prednjoj ploči
Slika: Detaljna view of the plasma cutter's front panel, highlighting the current display meter, current adjustment button, cutting gun connection, gun switch, and ground wire pliers connection.
- Current Display Meter: Digital display showing the output amperage.
- Current Adjustment Button: Rotary knob to set the desired cutting amperage (MIN to MAX).
- Cutting Gun Connection: Port for connecting the PT31 cutting torch.
- Gun Switch: Connector for the torch trigger cable.
- Ground Wire Pliers Connection: Terminal for connecting the earth clamp.
3.2 Rear Panel Connections and Features
Slika: Detaljna view of the plasma cutter's rear panel, showing the waterproof power switch, air input, and high-speed cooling fan.
- Vodootporni prekidač: Main power ON/OFF switch.
- Air IN: Connection point for the compressed air supply.
- High-speed Fan: Unutrašnji ventilator za hlađenje za održavanje optimalne radne temperature.
3.3 PT31 Cutting Torch Components
Image: An exploded diagram of the PT31 cutting torch head, illustrating the SHEDED-CUP, TIP-EXTENDED, GAS RING, and ELECTRODE-EXTENDED components.
- SHEDED-CUP: Protects the electrode and focuses the plasma arc.
- TIP-EXTENDED: Directs the plasma arc to the workpiece.
- GAS RING: Ensures proper gas flow around the electrode.
- ELECTRODE-EXTENDED: Generates the plasma arc.
4. Upute za postavljanje
- Connect Air Pressure Valve: Attach the air pressure valve (regulator) to the 'AIR IN' port on the rear of the plasma cutter. Ensure a secure, airtight connection.
- Spojite crijevo za zrak: Connect one end of the air hose to the air pressure valve and the other end to your compressed air supply.
- Connect Cutting Torch: Insert the cutting torch cable connector into the 'Cutting gun connection' port on the front panel. Connect the gun switch cable to its designated port.
- Connect Earth Clamp: Pričvrstiti uzemljenje clamp cable to the 'Ground wire pliers connection' terminal on the front panel. Securely clamp zemlja klamp to the workpiece or a clean, bare metal part of the work table.
- Priključak za napajanje: Plug the plasma cutter into a 110V AC power outlet. A dedicated 50A breaker is suggested for optimal performance and safety.
- Install Consumables: Ensure the correct SHEDED-CUP, TIP-EXTENDED, GAS RING, and ELECTRODE-EXTENDED are properly installed in the PT31 cutting torch head.
5. Uputstvo za upotrebu
- Uključeno: Flip the waterproof switch on the rear panel to the 'ON' position. The current display meter should illuminate.
- Set Air Pressure: Adjust your compressed air supply to provide 60-70 psi at the air pressure valve.
- Podesite struju rezanja: Use the current adjustment button on the front panel to set the desired amperage based on the material thickness and type. Refer to the cutting chart below for guidance.
- Pripremite radni komad: Ensure the workpiece is clean and free of rust, paint, or other contaminants that could interfere with the arc.
- Započnite rezanje: Position the torch nozzle close to the workpiece. Press the trigger on the cutting torch to initiate the plasma arc. Maintain a consistent standoff distance and travel speed for a clean cut.
- Kapacitet rezanja: The RBC-4000 has a maximum rated clean cutting thickness of 9mm.
- Kompatibilni materijali: This plasma cutter is suitable for cutting aluminum, stainless steel, alloy steel, mild steel, copper, cast iron, and chrome.
5.1 Cutting Parameter Guide (RBC4000D-110V)
| Parametar | 20 Amps | 30 Amps | 35 Amps |
|---|---|---|---|
| Debljina (mm) | 5mm | 6mm | 8mm |
| Pritisak zraka (psi) | 40-50psi | 40-50psi | 50-60psi |
Slika: Visual examples demonstrating the quality of cuts on different material thicknesses (1mm, 5mm, 12mm).
6. Održavanje
- Zamjena potrošnog materijala: Regularly inspect the torch consumables (electrode, tip, shield cup). Replace them when they show signs of wear or damage to ensure optimal cutting performance.
- Filter zraka: Periodically check and drain the moisture from the air pressure valve's filter bowl. Replace the filter element if it becomes clogged.
- čišćenje: Keep the plasma cutter unit clean and free of dust and metal particles. Use compressed air to blow out internal components if necessary, ensuring the unit is unplugged.
- Inspekcija kablova: Inspect all cables (power, torch, earth clamp) for cuts, abrasions, or loose connections before each use.
7. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| No arc when trigger is pressed | No power; Loose connections; Faulty torch consumables; No air supply. | Check power supply and breaker; Secure all connections; Replace consumables; Verify air compressor is on and pressure is set. |
| Poor cut quality / Incomplete cuts | Netačno amperage setting; Low air pressure; Worn consumables; Too fast travel speed. | Podesite amperage according to material; Increase air pressure to 60-70 psi; Replace worn consumables; Reduce travel speed. |
| Unit overheats / Shuts down | Exceeded duty cycle; Blocked ventilation. | Allow unit to cool down; Ensure proper ventilation around the machine. |
| Curenje zraka | Loose air hose connections; Damaged air hose or regulator. | Tighten all air connections; Inspect and replace damaged components. |
8. Specifikacije
- Model: RBC-4000
- Ulazni voltage: 110 V AC
- Izlazna struja: 40 Amps (maks.)
- Radni ciklus: 60% na 40A, 100% na 28A
- Pritisak zraka: 60-70 psi
- Max Clean Cutting Thickness: 9mm (approximately 1/2 inch)
- Materijali za rezanje: Aluminum, Stainless Steel, Alloy Steel, Mild Steel, Copper, Cast Iron, Chrome
- Težina artikla: 13.97 funte
- Dimenzije paketa: 14.6 x 11.25 x 9.25 inča
- Proizvođač: Reboot-US
9. Garancija i podrška
The Reboot RBC-4000 Plasma Cutter comes with a 1 godine ograničene garancije. Additionally, Reboot offers a 30-day 100% satisfaction or money-back guarantee. For technical support, warranty claims, or assistance with product operation, please contact Reboot customer service through their official channels.
