1. Uvod
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Fantech CG73 Mid Tower Gaming PC Case. Please read this manual thoroughly before beginning assembly or use to ensure proper functionality and safety.
2. Sigurnosne informacije
- Always disconnect the power supply from the wall outlet before installing or removing any components inside the PC case.
- Pažljivo rukujte svim komponentama kako biste spriječili oštećenja uzrokovana statičkim elektricitetom. Razmislite o upotrebi antistatičke narukvice.
- Držite male dijelove i materijale za pakovanje dalje od djece.
- Osigurajte odgovarajuću ventilaciju oko kućišta računara kako biste spriječili pregrijavanje.
- Ne izlažite kućište vodi ili prekomjernoj vlazi.
- The tempered glass panel is fragile; handle with extreme care to avoid breakage.
3. Sadržaj paketa
Provjerite da li se sve stavke nalaze u vašem paketu:
- Fantech CG73 Mid Tower Gaming PC Case
- 4 x Pre-installed RGB Fans
- Kutija s priborom (vijci, vezice za kablove, odstojnici itd.)
- Korisnički priručnik (ovaj dokument)
4. Proizvod je gotovview
Familiarize yourself with the key features and components of the Fantech CG73 PC case.
Slika 4.1: Front view of the Fantech CG73 Mid Tower Gaming PC Case, showcasing the hexagonal design and pre-installed RGB fans.
4.1 Fan Support and Cooling
The HEXA CG73 case supports up to 6 RGB fans, providing extreme heat transfer and vibrant RGB lighting. It comes with 4 pre-installed fans.
Slika 4.2: Interni view highlighting fan installation points: 1. Rear fan, 2. Top fans, 3. Front fans, 4. Bottom fans. The case includes 4 pre-installed fans.
4.2 Inner Structure and Motherboard Compatibility
The CG73 case is designed to accommodate various motherboard form factors and storage devices.
Slika 4.3: Internal layout showing support for ATX, Micro-ATX, and Mini-ITX motherboards, along with dedicated installation locations for 1 SSD and 1 HDD.
4.3 Component Clearance
Ensure your components fit within the case's maximum supported dimensions.
Slika 4.4: Component clearance specifications: Maximum GPU length of 300mm, maximum CPU cooler height of 165mm. Supports ATX, Mini-ITX, and Micro-ATX motherboards. Motherboard and GPU are not included.
4.4 Handy I/O Ports
The top-front panel provides convenient access to essential ports.
Slika 4.5: Top-front I/O panel featuring one USB 3.0 port and two USB 2.0 ports for direct access, along with audio jacks and power/reset buttons.
5. Postavljanje i instalacija
Follow these steps to install your PC components into the Fantech CG73 case.
- Pripremite slučaj: Carefully remove the side panels. The tempered glass panel should be handled with extreme care.
- Instalirajte matičnu ploču: Poravnajte svoju ATX, Micro-ATX ili Mini-ITX matičnu ploču s odstojnicima unutar kućišta. Pričvrstite je priloženim vijcima.
- Instalacija hladnjaka za procesor: If not already installed, mount your CPU cooler. Ensure it does not exceed the maximum height of 165mm.
- Instaliranje grafičke kartice (GPU): Insert your GPU into the appropriate PCIe slot on the motherboard. Ensure it does not exceed the maximum length of 300mm. Secure it with screws.
- Instalirajte diskove za pohranu podataka:
- SSD diskovi: Mount 2.5-inch SSDs in the designated SSD trays/mounts.
- HDD-ovi: Mount 3.5-inch HDDs in the HDD cage.
- Instalirajte napajanje (PSU): Slide your PSU into the dedicated compartment at the bottom of the case. Secure it with screws from the rear.
- Upravljanje kablovima: Route all power cables and data cables through the cable management cutouts to the back of the motherboard tray. Connect them to the respective components. Ensure fan and RGB cables are connected to the motherboard or a fan controller.
- Ponovno pričvršćivanje panela: Once all components are installed and cables are managed, carefully reattach the side panels.
6. Uputstvo za upotrebu
After assembly, connect your peripherals and power on your system.
- Uključeno: Connect the power cable to your PSU and a wall outlet. Press the power button on the top-front I/O panel.
- RGB kontrola: The pre-installed RGB fans are typically controlled via your motherboard's RGB software (if connected to an RGB header) or a dedicated RGB controller (if included or purchased separately). Refer to your motherboard manual for specific RGB software instructions.
- USB portovi: Use the USB 3.0 and USB 2.0 ports on the top panel for connecting external devices.
- Audio priključci: Connect your headphones and microphone to the audio jacks on the top panel.
7. Održavanje
Redovno održavanje pomaže u osiguravanju optimalnih performansi i dugovječnosti kućišta i komponenti vašeg računara.
- Čišćenje prašine: Povremeno čistite filtere za prašinu (ako postoje) i unutrašnje komponente komprimiranim zrakom. Prije čišćenja provjerite je li sistem isključen iz struje i iskopčan iz struje.
- Čišćenje ventilatora: Gently clean fan blades with a soft brush or compressed air to prevent dust buildup, which can impede airflow.
- Eksterijerno čišćenje: Obrišite vanjski dio kućišta mekom,amp cloth. Avoid abrasive cleaners or solvents. For the tempered glass, use a glass cleaner and a microfiber cloth.
- Provjera upravljanja kablovima: Povremeno provjerite usmjeravanje kablova kako biste se uvjerili da nijedan kablov ne ometa protok zraka ili rad ventilatora.
8. Otkrivanje problema
Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Računar se ne uključuje. | Power cable loose, PSU switch off, front panel connectors incorrect. | Check all power connections. Ensure PSU switch is ON. Verify front panel power button connection to motherboard. |
| Ventilatori se ne okreću ili RGB podsjetnik ne svijetli. | Fan/RGB cables disconnected, incorrect connection to motherboard/controller. | Check fan power and RGB signal cable connections. Ensure they are securely plugged into the correct headers. |
| Overheating issues. | Poor airflow, dust buildup, insufficient fan speed. | Ensure all fans are spinning correctly. Clean dust filters and internal components. Verify fan orientation for optimal airflow. |
| USB portovi ne rade. | Front panel USB cable disconnected from motherboard. | Check the USB 3.0 and USB 2.0 headers on the motherboard are correctly connected to the case's front panel cables. |
9. Specifikacije
| Feature | Detalj |
|---|---|
| Brand | Fantech |
| Broj modela | CG73 |
| Tip | Mid Tower Gaming PC kućište |
| Boja | Crna |
| Materijal | Kaljeno staklo |
| Podrška za matičnu ploču | ATX, Micro ATX, Mini ITX |
| Unaprijed instalirani ventilatori | 4 x RGB Fans |
| Maksimalna dužina GPU-a | 300 mm |
| Maksimalna visina CPU hladnjaka | 165 mm |
| Storage Bays | 1 x 2.5" SSD, 1 x 3.5" HDD |
| I/O portovi | 1 x USB 3.0, 2 x USB 2.0, audio ulaz/izlaz |
| Metoda hlađenja | Vazduh |
| Težina artikla | 5 kilograma |
10. Garancija i podrška
Za informacije o garanciji i tehničkoj podršci, molimo vas da se obratite službenom Fantech servisu. webweb-mjesto ili kontaktirajte lokalnog prodavača. Sačuvajte dokaz o kupovini za slučaj reklamacije.
Za dodatnu pomoć posjetite: www.fantechworld.com
