1. Uvod
Thank you for choosing the Imetec Eco Ceramic Fan Heater, Model 4033. This appliance is designed to provide efficient and comfortable heating for your indoor spaces. Featuring advanced ceramic technology, it offers rapid heating with reduced energy consumption. Please read this manual carefully before use to ensure safe and optimal operation.
Figure 1: Imetec Eco Ceramic Fan Heater, Model 4033.
2. Sigurnosne informacije
Uvijek se pridržavajte osnovnih sigurnosnih mjera opreza prilikom korištenja električnih uređaja kako biste smanjili rizik od požara, strujnog udara i ozljeda osoba.
- Ne prekrivajte grijač kako biste izbjegli pregrijavanje.
- Držite zapaljive materijale dalje od grijača.
- Do not use in bathrooms or wet areas.
- Osigurajte voltage specified on the rating label corresponds to your mains supply voltage.
- Isključite uređaj iz struje kada ga ne koristite ili prije čišćenja.
3. Značajke proizvoda
- Keramička tehnologija: Provides rapid and efficient heating.
- Ušteda energije: Reduced energy consumption by up to 40%.
- Svestrana podešavanja temperature: Offers 3 temperature levels (cool, warm, very warm) for year-round use.
- Filter protiv prašine: Pomaže u održavanju kvalitete zraka.
- Ambient Thermostat: Allows you to select and maintain your desired room temperature.
Smanjena potrošnja energije
3 temperaturnih nivoa
Filter protiv prašine
Ambijentalni termostat
4. Podešavanje
- Raspakivanje: Carefully remove the fan heater from its packaging. Retain the packaging for future storage or transport.
- plasman: Place the heater on a firm, level surface, ensuring it is at least 1 meter (3 feet) away from walls, furniture, and curtains. Do not place it directly under a power socket.
- Priključak za napajanje: Ensure the heater is switched off (turn the control knob to '0' or 'OFF'). Plug the power cord into a suitable 240V AC electrical outlet.
Figure 2: Ensure proper placement and connection.
5. Uputstvo za upotrebu
The Imetec Eco Ceramic Fan Heater features a control knob for power and temperature settings, and a thermostat knob for ambient temperature control.
Figure 3: Control knob for power and temperature settings.
- Power On/Temperature Selection:
- Turn the main control knob clockwise to select the desired operating mode:
- Fan Only (Cool Air): Za cirkulaciju zraka bez zagrijavanja.
- Low Heat (Warm Air): For gentle heating, typically 1200W.
- High Heat (Very Warm Air): For rapid and powerful heating, typically 2000W.
- Podešavanje termostata:
- Once a heat setting is selected, turn the thermostat knob (usually the inner knob) clockwise to increase the desired room temperature.
- Grijač će raditi dok se ne dostigne zadana temperatura, a zatim će se ciklično uključivati i isključivati kako bi je održao.
- Turn the thermostat knob counter-clockwise to decrease the desired temperature.
- Iskljuciti: Turn the main control knob counter-clockwise to the '0' or 'OFF' position. Unplug the appliance from the power outlet when not in use for extended periods.
Figure 4: The fan heater provides comfortable warmth in various indoor environments.
6. Održavanje
Redovno održavanje osigurava dugotrajnost i efikasan rad vašeg ventilatorskog grijača.
- Čišćenje eksterijera:
- Uvijek isključite grijalicu iz struje i ostavite je da se potpuno ohladi prije čišćenja.
- Obrišite vanjske površine mekom krpom, damp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili rastvarače.
- Ensure no water enters the interior of the appliance.
- Čišćenje filtera protiv prašine:
- The anti-dust filter is located at the rear of the unit.
- Gently remove the filter cover and the filter itself.
- Clean the filter with a soft brush or vacuum cleaner to remove accumulated dust.
- Rinse the filter under running water if necessary, ensuring it is completely dry before reinserting.
- Reattach the filter and cover securely.
- Skladištenje: If storing the heater for an extended period, clean it thoroughly and store it in its original packaging in a dry, cool place.
Figure 5: Location of the anti-dust filter at the back of the unit.
7. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Grijač se ne uključuje. | Not plugged in; power switch off; no power at outlet; safety cut-out activated. | Check power cord connection; ensure main control knob is on a heat setting; check household fuse/circuit breaker; unplug, wait 10 minutes, then plug in again. |
| Nema grijanja, radi samo ventilator. | Main control knob set to fan-only mode; thermostat set too low. | Turn main control knob to a heat setting (Low Heat or High Heat); increase thermostat setting. |
| Heater produces unusual noise. | Dust accumulation on fan blades; loose internal component. | Clean the anti-dust filter and fan area (ensure unit is unplugged); if noise persists, contact customer support. |
| Heater smells burnt. | Dust on heating elements; new unit initial burn-off. | Unplug immediately. Clean dust from elements (when cool). If new, a slight smell is normal for first few uses. If smell persists or is strong, discontinue use and contact support. |
8. Specifikacije
| Brand | Imetec |
| Model | 4033 |
| Boja | Bijelo |
| Voltage | 240 Volt |
| Broj brzina | 3 |
| Posebne karakteristike | Electric, Ceramic Technology, Thermostat |
| Težina artikla | 1.57 kilograma |
| Dimenzije (D x Š x V) | 34.79 x 24.8 x 18.9 cm |
| Form Factor | Postolje |
| Unutarnja/vanjska upotreba | Indoor |
9. Garancija i podrška
This Imetec Eco Ceramic Fan Heater, Model 4033, comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including warranty duration and coverage details.
For technical support, troubleshooting assistance beyond what is provided in this manual, or warranty claims, please contact Imetec Customer Service. Contact information can typically be found on the official Imetec webweb-mjestu ili na ambalaži proizvoda.
Online resursi: For additional information and support, visit the official Imetec webstranica: www.imetec.com
