Kohree HY1733

Kohree RV Water Pump 3.5GPM 55PSI User Manual

Model: HY1733

1. Važne informacije o sigurnosti

Please read and understand all safety instructions before installing or operating this pump. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage.

  • električna sigurnost: Ensure the power supply is disconnected before performing any installation or maintenance. Connect the pump only to a 12V DC power source. Use appropriate fuse protection as specified (15-18 amp preporučeno).
  • Sigurnost vode: This pump is designed for fresh water only. Do not use with flammable liquids, corrosive chemicals, or water above 110°F (43°C).
  • Instalacija: Mount the pump in a dry, well-ventilated area. Ensure all connections are secure and leak-free.
  • Operacija: Do not run the pump dry for extended periods. The pump features built-in thermal overload protection to prevent motor damage.

2. Proizvod je gotovview

The Kohree 12V DC Fresh Water Pump (Model HY1733) is a self-priming diaphragm pump designed for reliable water transfer in various applications. It delivers a flow rate of 3.5 gallons per minute (GPM) with a pressure switch set to 55 PSI, making it suitable for RVs, campers, marine vessels, yachts, and garden irrigation systems.

Kohree RV Water Pump with included accessories

Image: The Kohree RV Water Pump shown with various included accessories, such as hose barb fittings, a water strainer, and Teflon tape.

Ključne karakteristike:

  • High Flow & Pressure: 3.5 GPM flow rate and 55 PSI pressure for efficient water delivery.
  • Samousisavajuci: Primes up to 3 meters (approximately 10 feet), simplifying initial setup.
  • Run Dry Protection: Can run dry for short periods without damage, preventing motor burnout.
  • Termička zaštita od preopterećenja: Automatically shuts off the motor if it overheats, ensuring safety and longevity.
  • Rad sa niskim nivoom buke: Engineered for reduced operational noise.
  • Izdržljiva konstrukcija: Features an iron base for stability and quality materials for reliability.
Diagram illustrating low noise level of the pump

Image: A diagram illustrating the pump's low noise level, comparing it to common sounds like whispering and a car refrigerator.

3. Specifikacije

SpecifikacijaVrijednost
Broj modelaHY1733
Voltage12 volti DC
Maksimalni protok3.5 galona u minuti (GPM)
Podešavanje prekidača pritiska55 PSI
Maksimalna visina podizanja124 stopa
Current Draw7.0 Amps (maks.)
Preporučeni osigurač15-18 Amps
MaterijalCopper, Nylon/Polypropylene
Dimenzije proizvoda (D x Š x V)10.98" x 5.63" x 5.08"
Težina artikla10.2 unci (približno 290 grama)
Basic parameters of the Kohree water pump: 12V, 3.5GPM, 124FT lift

Image: Visual representation of the pump's basic parameters: 12V operating voltage, 3.5 GPM flow rate, and 124 feet maximum lift.

Product dimensions of the Kohree water pump

Image: Detailed product dimensions of the Kohree water pump, including overall length, width, and height, and inlet/outlet sizes.

Components and materials of the Kohree water pump

Image: An illustration detailing the quality materials used in the pump's construction, such as Nylon/Polypropylene shell, EPDM/Viton sealing, copper motor, and anti-vibration rubber pump bracket.

4. Instalacija

Proper installation is crucial for optimal performance and longevity of your water pump.

4.1 Provjere prije instalacije

  • Ensure the mounting surface is solid and stable.
  • Verify that the power source is 12V DC and can supply the required amperage (7.0 Amps).
  • Confirm you have all necessary plumbing fittings and hoses.

4.2 Montaža pumpe

Mount the pump in a location that is easily accessible for maintenance, protected from freezing temperatures, and as close as possible to the water source. Use the integrated mounting feet to secure the pump to a flat surface.

4.3 Vodovodne veze

  1. Ulazni priključak: Connect the water supply line (from the freshwater tank) to the pump's inlet port. It is recommended to install a water strainer/filter on the inlet side to prevent debris from entering the pump.
  2. Izlazni priključak: Connect the discharge line (to the RV/marine plumbing system) to the pump's outlet port.
  3. Okov: Use the provided hose barb fittings for secure connections. Apply Teflon tape to threaded connections to ensure a watertight seal and prevent leaks.
Diagram of a water pump installation in a yacht

Image: A schematic diagram illustrating a typical water pump installation in a yacht, showing connections to the freshwater tank, filter, accumulator tank, water heater, faucet, and shower.

Diagram of a water pump installation in an RV

Image: A schematic diagram illustrating a typical water pump installation within an RV's water system, connecting to various fixtures like sinks, toilets, and showers.

Hose barb fittings for water pump connections

Slika: Krupni plan view of the hose barb fittings provided for connecting water lines to the pump.

Teflon tape for sealing pipe threads

Image: A roll of Teflon tape, used for sealing threaded pipe connections to prevent leaks.

4.4 Električne veze

  1. Connect the positive (+) wire from the pump to the positive terminal of your 12V DC power source, ensuring an in-line fuse (15-18 amp) je instaliran.
  2. Connect the negative (-) wire from the pump to the negative terminal of your 12V DC power source.
  3. Osigurajte da su svi električni priključci sigurni i zaštićeni od vlage.

5. Operacija

Once installed, operating the Kohree water pump is straightforward.

  1. Prajming: Ensure the freshwater tank has water. Open a faucet in your system to allow air to escape. Turn on the pump's power. The pump will self-prime, drawing water and expelling air until a steady flow is achieved. Close the faucet once water flows consistently.
  2. Automatski rad: The pump features a built-in pressure switch. When a faucet is opened, the pressure drops, and the pump automatically turns on. When the faucet is closed, the pressure builds up, and the pump automatically turns off.
  3. Run Dry Protection: The pump is designed to run dry for a short period without damage. However, it is best practice to ensure a water supply is always available to prevent unnecessary wear.
Comparison of water flow before and after using the pump

Image: A visual comparison showing low water flow before the pump and significantly improved, high water flow after the pump is activated, demonstrating its effectiveness.

6. Održavanje

Regular maintenance helps ensure the longevity and efficient operation of your pump.

6.1 Cleaning the Water Strainer

The inlet water strainer should be inspected and cleaned periodically, especially if you notice reduced water flow. To clean:

  1. Isključite napajanje pumpe.
  2. Unscrew the clear housing of the strainer.
  3. Remove the mesh filter and rinse it thoroughly under clean water.
  4. Reassemble the strainer, ensuring a tight seal.
Components of the water strainer for cleaning

Slika: Eksplodirano view of the water strainer, showing its main body, mesh filter, and clear housing, indicating how to disassemble for cleaning.

6.2 Pressure Switch Adjustment

The pressure switch is factory-set to 55 PSI. If minor adjustments are needed, consult a qualified technician. Improper adjustment can lead to pump malfunction or damage.

Pressure switch adjustment screw on the pump

Slika: Krupni plan view of the pressure switch on the pump, highlighting the adjustment screw for fine-tuning pressure settings.

6.3 Zimovanje

In freezing conditions, the pump and plumbing system must be winterized to prevent damage. This typically involves draining all water from the system or flushing with RV-specific antifreeze. Refer to your RV or marine vessel's specific winterization guidelines.

7. Otkrivanje problema

Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti s vašom vodenom pumpom.

ProblemMogući uzrokRješenje
Pumpa ne radiNo power, blown fuse, loose wiringCheck power supply, replace fuse, tighten connections.
No water flow / Low flowNo water in tank, clogged strainer, air in system, kinked hoseFill tank, clean strainer, prime pump, check hoses.
Pumpa radi neprekidnoLeak in system, faulty pressure switch, air in systemCheck for leaks, inspect pressure switch, re-prime system.
Pumpa se brzo uključuje i isključujeSmall leak, restricted flow, low voltageCheck for minor leaks, ensure clear flow path, verify voltage.

8. Garancija i korisnička podrška

The Kohree 12V water pump is certified to CE standards and comes with a one-year warranty. If you experience any quality issues or are not satisfied with your purchase, please contact Kohree customer service for assistance.

For customer support, please refer to the contact information provided with your purchase or visit the official Kohree website.

9. Video resursi

No official product videos from the seller were available for embedding based on the provided data. Please refer to the manufacturer's webweb-mjesto ili stranicu proizvoda za sve dostupne video resurse.

Povezani dokumenti - HY1733

Preview KOHREE Uputstvo za upotrebu auto frižidera: Karakteristike, rad i rešavanje problema
Sveobuhvatno korisničko uputstvo za KOHREE automobilski frižider sa kompresorom. Saznajte više o njegovim karakteristikama, instalaciji, radu, postavkama temperature, zaštiti baterije, rješavanju problema i informacijama o garanciji.
Preview KOHREE Uputstvo za upotrebu auto frižidera
Sveobuhvatno korisničko uputstvo za KOHREE automobilski frižider, koje detaljno opisuje njegove karakteristike, rad, instalaciju, rješavanje problema i informacije o garanciji. Pogodno za kamione, kampere,...ampi kućnu upotrebu.
Preview KOHREE HY1234 RV Door Lock User Manual - Installation & Operation Guide
Comprehensive user manual for the KOHREE HY1234 RV Door Lock. Includes step-by-step installation, keypad programming, app setup, basic operations, and FCC compliance information.
Preview KOHREE HY1704 RV nivelator Uputstvo za upotrebu i tehničke specifikacije
Ovaj dokument pruža upute i tehničke detalje za KOHREE HY1704 RV nivelator, uključujući informacije o postavljanju, upotrebi i usklađenosti s FCC propisima.
Preview KOHREE RV Awning LED Light Strip Installation Guide & Manual (Model HY0682)
Comprehensive guide for installing and operating the KOHREE 20-foot RV Awning LED Light Strip (Model HY0682). Learn about package contents, mounting, cutting, connecting to power, and using the mobile app for control. Includes troubleshooting tips and FCC compliance information.
Preview KOHREE Uputstvo za upotrebu auto frižidera: Karakteristike, rukovanje i vodič za rešavanje problema
Istražite korisnički priručnik za automobilski hladnjak KOHREE za detaljne informacije o njegovim karakteristikama, radu, sigurnosnim smjernicama, savjetima za rješavanje problema i garanciji. Naučite kako efikasno koristiti svoj prijenosni hladnjak s dvije zone za putovanja i kod kuće.