Uvod
This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your GBC ShredMaster AUTO+ 50X Auto Feed Cross Cut Shredder. Please read this manual thoroughly before using the shredder and retain it for future reference.
The GBC ShredMaster AUTO+ 50X is designed for shredding paper documents and credit cards, offering a P-4 security level for confidential information. It features both automatic and manual feed options for convenience.
Sigurnosne informacije
- Držite ruke, kosu i labavu odjeću dalje od otvora za ulaz papira.
- Držite djecu i kućne ljubimce podalje od sjeckalice.
- Ne prskajte zapaljive proizvode po šrederu niti ga koristite u blizini zapaljivih materijala.
- Isključite drobilicu iz struje prije premještanja, čišćenja ili pražnjenja kante za otpad.
- Do not shred metal objects, large paper clips, or adhesive labels as these can damage the cutting mechanism. Small paper clips and staples are generally acceptable for this model.
- Koristite usitnjivač na ravnoj, stabilnoj površini.
Setup
- Raspakivanje: Carefully remove the shredder from its packaging. Ensure all packing materials are removed from around the shredder and inside the waste bin.
- plasman: Position the shredder on a level, stable surface near a power outlet. Ensure there is adequate space around the unit for ventilation and access to the waste bin.
- Priključak za napajanje: Uključite kabl za napajanje u standardnu električnu utičnicu.
- Kanta za smeće: Ensure the waste bin is correctly inserted into the shredder housing. The shredder will not operate if the bin is not properly seated.
Uputstvo za upotrebu
Kontrolna tabla završenaview
The control panel features intuitive touch controls for easy operation.
Automatic Feed Operation
The AUTO+ 50X features an automatic feed tray for shredding up to 50 sheets of 80 gsm paper at once.
- Ensure the shredder is plugged in and the waste bin is correctly inserted.
- Lift the automatic feed tray cover.
- Stack up to 50 sheets of paper neatly into the automatic feed tray. Ensure there are no folded or crumpled sheets.
- Close the automatic feed tray cover. The shredder will automatically detect the paper and begin shredding.
Ručno uvlačenje
For smaller quantities of paper (up to 6 sheets of 80 gsm) or credit cards, use the manual feed slot.
- Ensure the shredder is plugged in and the waste bin is correctly inserted.
- Insert paper or a credit card into the manual feed slot. The shredder will automatically start and stop.
- For credit cards, insert one card at a time into the designated slot.
Zaštita od pregrijavanja
To prevent motor overheating, the shredder is equipped with an automatic thermal overload protection system. After approximately 10 minutes of continuous shredding, the machine will automatically rest for 45 minutes to cool down. During this cool-down period, the shredder will not operate. Resume operation once the cool-down period is complete.
Održavanje
Pražnjenje kante za otpad
The shredder features an easy-to-empty 20-liter pull-out bin with a viewing window to monitor fill levels.
- Isključite šreder iz električne utičnice.
- Izvucite kantu za otpad s prednje strane usitnjivača.
- Empty the shredded material into a suitable receptacle.
- Slide the waste bin back into the shredder until it is securely seated.
- Ponovo uključite šreder u utičnicu.
Oiling the Shredder
Regular oiling of the shredder blades is recommended to maintain optimal performance and extend the life of your shredder. Use GBC shredder oil or a vegetable-based oil (avoid aerosol oils).
- Nanesite tanku liniju ulja za rezače papira preko otvora za ulaz papira.
- Run the shredder in reverse for 10 seconds to distribute the oil.
- Repeat this process after every 30 minutes of accumulated shredding or at least twice a month.
Čišćenje
Obrišite vanjski dio usitnjivača mekom, suhom krpom. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
Rješavanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Shredder se ne pokreće. |
|
|
| Zastoj papira. |
|
|
| Shredder radi sporo ili proizvodi neobičnu buku. |
|
|
Specifikacije
- Model: G2020050X
- Vrsta usitnjavanja: Cross Cut
- Nivo sigurnosti: P-4 (DIN 66399)
- Veličina usitnjavanja: 4 x 28 mm confetti cut
- Auto Feed Capacity: 50 listova (80 g/mXNUMX)
- Kapacitet ručnog uvlačenja: 6 listova (80 g/mXNUMX)
- komadići: Paper, small paper clips, staples, credit cards
- Kapacitet kante: 20 litara
- Vrijeme rada: 10 minutes continuous, 45 minutes cool-down
- Približne dimenzije (V x Š x D): 40.6 cm x 43.2 cm x 38.1 cm (16" H x 17" W x 15" D, based on product images)
- Težina: 11.6 kg
- Izvor napajanja: Corded Electric
- Posebne karakteristike: Automatic Start/Stop, Jam Proof
Garancija i podrška
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official GBC webSačuvajte dokaz o kupovini za slučaj reklamacije.
For further assistance, you may contact GBC customer service through their official channels. Details are typically available on the manufacturer's weblokacija ili ambalaža proizvoda.
