TOTAL Aspirator Blower TB2046 User Manual

Uvod

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your TOTAL Aspirator Blower TB2046. Please read these instructions carefully before using the tool and retain them for future reference.

The TOTAL TB2046 is a versatile corded electric tool designed for both blowing and aspirating (vacuuming) tasks, suitable for various applications such as clearing dust, debris, and light garden waste.

Sigurnosna uputstva

Opća sigurnosna upozorenja:

• Always wear appropriate personal protective equipment (PPE) such as safety glasses, hearing protection, and a dust mask.
• Ensure the work area is clean, well-lit, and free from obstructions. Keep children and bystanders away while operating the tool.
• Nemojte koristiti električne alate u eksplozivnoj atmosferi, kao što je prisustvo zapaljivih tečnosti, gasova ili prašine.
• Izbjegavajte slučajno pokretanje. Uvjerite se da je prekidač u isključenom položaju prije uključivanja.
• Nemojte zloupotrebljavati kabl. Nikada nemojte koristiti kabel za nošenje, povlačenje ili isključivanje električnog alata. Držite kabl dalje od toplote, ulja, oštrih ivica ili pokretnih delova.
• Uvijek isključite utikač iz izvora napajanja prije bilo kakvih podešavanja, promjene pribora ili skladištenja električnih alata.
• Maintain the tool with care. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation.
• Ne usmjeravajte mlaznicu puhala prema ljudima ili životinjama.
• Ne blokirajte usis ili izlaz zraka tokom rada.

Product Overview

Familiarize yourself with the components of your TOTAL Aspirator Blower TB2046:

• Glavna jedinica (kućište motora)
• Blowing Pipe
• Dust Bag (for aspiration mode)
• Kabl za napajanje
• On/Off prekidač
• Ulaz/izlaz zraka

Image 1: The TOTAL TB2046 Aspirator Blower, showing the main unit and the attached blowing pipe. The power cord is visible at the rear.

Slika 2: Bočna strana view of the TOTAL TB2046, highlighting the air intake grille, which is used for aspiration (vacuum) functions.

Image 3: Product packaging illustrating the main components: the blower unit, blowing pipe, and dust bag. It also indicates replaceable carbon brushes.

Setup

1. Attaching the Blowing Pipe:

1. Align the blowing pipe with the air outlet on the front of the main unit.
2. Push the pipe firmly until it clicks into place or is securely seated. Ensure it is not loose.

2. Attaching the Dust Bag (for Aspiration Mode):

1. Remove the blowing pipe if it is attached to the air outlet.
2. Attach the blowing pipe to the air intake port (side opening) of the main unit. This converts the tool into a vacuum.
3. Attach the dust bag to the air outlet port (front opening) of the main unit. Ensure the bag is securely fastened to prevent debris leakage.

Uputstvo za upotrebu

1. Prije operacije:

• Ensure the tool is correctly assembled for the desired function (blowing or aspiration).
• Check that the power cord is in good condition and connected to a suitable power outlet (220-240V~50/60Hz).
• Wear all recommended PPE.

2. Starting the Tool:

• Hold the tool firmly by the handle.
• Press the On/Off switch to start the motor.

3. Blowing Function:

• Direct the blowing pipe towards the area to be cleared.
• Move the tool in a sweeping motion to effectively clear dust, leaves, or light debris.

4. Aspiration (Vacuum) Function:

• Ensure the blowing pipe is attached to the air intake and the dust bag to the air outlet.
• Position the end of the blowing pipe near the debris to be collected.
• The tool will draw in debris, which will be collected in the dust bag.
• Regularly check and empty the dust bag to maintain optimal suction power.

5. Stopping the Tool:

• Release the On/Off switch to turn off the motor.
• Unplug the tool from the power outlet after use.

Održavanje

Redovno održavanje osigurava dugotrajnost i optimalne performanse vašeg alata.

1. Čišćenje:

• Uvijek isključite alat prije čišćenja.
• Obrišite vanjski dio alata mekom,amp tkanina. Nemojte koristiti jake hemikalije ili abrazivna sredstva za čišćenje.
• Ensure air vents are clear of dust and debris to prevent overheating. Use a soft brush or compressed air if necessary.

2. Dust Bag:

• Empty the dust bag regularly, especially when it is half full, to maintain suction efficiency.
• Clean the dust bag periodically by shaking out accumulated dust or washing it if the material allows (ensure it is completely dry before reattaching).

3. Carbon Brushes:

• The TOTAL TB2046 features replaceable carbon brushes. Over time, carbon brushes wear down and may need replacement.
• If the motor performance decreases significantly or sparks are visible, the carbon brushes may need inspection or replacement.
• Refer to a qualified service technician for carbon brush replacement to ensure proper installation and tool safety.

4. Skladištenje:

• Alat čuvajte na suhom, sigurnom mjestu, van dohvata djece.
• Coil the power cord neatly to prevent damage.

Rješavanje problema

Specifikacije

Image 4: Size comparison of the TOTAL TB2046 Aspirator Blower, indicating its compact and handheld design, approximately 19 cm (7.8 inches) in height.

Garancija i podrška

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact your local TOTAL tools distributor or customer service center. Keep your proof of purchase for warranty claims.

Always ensure that any repairs or maintenance beyond basic cleaning are performed by qualified personnel using genuine replacement parts.