Simrad IP CAM-1 Marine Camera Korisničko uputstvo

1. Uvod

The Simrad IP CAM-1 is a robust marine camera designed to enhance vessel awareness and safety. This camera provides clear visual monitoring of areas onboard or in close proximity to your boat. Its durable construction and advanced features make it suitable for demanding marine environments.

This manual provides essential information for the proper installation, operation, and maintenance of your IP CAM-1 camera. Please read it thoroughly before using the product.

2. Značajke proizvoda

Rugged 316 Stainless Steel Construction: Engineered to withstand harsh saltwater environments, ensuring longevity and reliability.
Slika visoke rezolucije: Delivers clear visuals with a 1920 x 1080 resolution.
Mogućnost noćnog vida: Equipped with high-performance IR LEDs for operation in low-light conditions or complete darkness, offering a 10-meter range.
Širokougaoni objektiv: Features a 1.8mm wide-angle lens to provide a broad field of view.
Fleksibilne opcije napajanja: Supports Power Over Ethernet (POE) for simplified wiring or a standard 12V power supply.
Besprekorna integracija: Preconfigured for compatible Simrad NSSevo3/3S, NSOevo3/3S, Lowrance HDS LIVE, B&G Zeus 3, and Zeus 3S chartplotters/fish finders.

3. Sigurnosne informacije

Molimo vas da se pridržavate sljedećih sigurnosnih mjera opreza kako biste spriječili ozljede ili oštećenje proizvoda:

Ensure all power connections are made correctly and securely to avoid electrical hazards.
Do not attempt to open or modify the camera housing, as this may compromise its waterproof integrity and void the warranty.
Mount the camera in a location where it will not obstruct navigation or create a tripping hazard.
Isključite napajanje prije bilo kakvog održavanja ili čišćenja.
Consult a qualified marine electronics technician for complex installations or repairs.

4. Sadržaj paketa

Nakon otvaranja pakovanja, provjerite da li su sve komponente prisutne i neoštećene:

Simrad IP CAM-1 Marine Camera
Mounting Hardware (screws, gaskets, etc. - typical for marine cameras)
Šablon za instalaciju (ako je primjenjivo)
Dokumentacija (ovaj korisnički priručnik)

Note: Specific cable lengths and types may vary. Ensure you have appropriate Ethernet (for POE) or 12V power cables for your installation.

5. Postavljanje i instalacija

The IP CAM-1 is designed for straightforward installation. Follow these steps for optimal performance:

Odaberite lokaciju za montažu: Select a position that provides the desired field of view. The camera can be mounted rear-facing for use as a reverse camera or forward-facing for a view ahead of your vessel. Ensure the location is clear of obstructions and allows for proper cable routing.
Montirajte kameru: Secure the camera using the provided mounting hardware. Ensure a watertight seal if mounting in an exposed area. The 316 stainless steel housing is designed for direct exposure to marine elements.
Priključak za napajanje:
- Napajanje preko Etherneta (POE): If using POE, connect a compatible Ethernet cable from a POE-enabled network switch or injector directly to the camera's Ethernet port. This single cable will provide both power and data.
- 12V napajanje: If not using POE, connect the camera to a stable 12V DC power source. Ensure correct polarity (positive to positive, negative to negative) to prevent damage.
Mrežna veza: Connect the camera to your vessel's network via an Ethernet cable. The camera is preconfigured for direct integration with compatible Simrad, Lowrance, and B&G chartplotters.
Initial Configuration (IP Address): After connecting, you may need to manually enter the camera's IP address on each compatible multifunction display (MFD) where you wish to view the camera feed. Refer to your MFD's user manual for specific instructions on adding IP cameras.

Simrad IP CAM-1 Marine Camera, front view showing the lens and stainless steel housing.

Figure 5.1: The compact, spherical design of the Simrad IP CAM-1 Marine Camera, highlighting its durable 316 stainless steel housing and the wide-angle lens. The camera is designed for marine environments.

6. Operacija

Once installed and configured, the IP CAM-1 camera feed can be accessed through your compatible chartplotter or fish finder.

Accessing Camera Feed: Navigate to the camera input section on your Simrad, Lowrance, or B&G multifunction display. The camera feed should appear as an available source.
Više kamera: If multiple IP CAM-1 cameras are installed on your network, you can typically cycle through their views directly from your MFD.
noćni vid: The camera automatically activates its IR LEDs in low-light conditions, providing clear black-and-white video up to 10 meters.

7. Održavanje

Regular maintenance ensures the longevity and optimal performance of your IP CAM-1 camera.

Čišćenje sočiva: Pažljivo očistite objektiv kamere mekom krpomamp cloth to remove salt spray, dirt, or debris. Avoid abrasive cleaners or materials that could scratch the lens.
stambena inspekcija: Periodically inspect the 316 stainless steel housing for any signs of corrosion or damage. While highly resistant, extreme conditions may require attention.
Kablovske veze: Check all cable connections for tightness and signs of wear or corrosion. Ensure waterproof seals are intact.

8. Otkrivanje problema

If you encounter issues with your IP CAM-1 camera, refer to the following common problems and solutions:

Problem	Mogući uzrok	Rješenje
No camera feed on MFD	Nema napajanja za kameru Loose network cable Incorrect IP address configuration Incompatible MFD model	Check power supply (POE or 12V). Ensure Ethernet cable is securely connected. Verify IP address settings on your MFD. Note: This camera is not compatible with Lowrance HDS Gen 3 units.
Loša kvaliteta slike	Prljava sočiva Insufficient lighting (if IR not active) Network interference	Očistite sočivo kamere. Ensure IR LEDs are functioning in dark conditions. Check network cabling and connections for integrity.
Camera not recognized by network	Network configuration issue Neispravan Ethernet kabl	Verify network settings on your MFD and network switch. Testirajte s drugim Ethernet kabelom.

9. Tehničke specifikacije

Model: IP CAM-1
rezolucija: 1920 x 1080
Objektiv: 1.8mm wide-angle
noćni vid: High-performance IR LEDs (10m range)
Građevinski materijal: 316 Nerđajući čelik
Opcije napajanja: Power Over Ethernet (POE) or 12V DC
Kompatibilnost: Simrad NSSevo3/3S, NSOevo3/3S, Lowrance HDS LIVE, B&G Zeus 3, Zeus 3S (Not compatible with Lowrance HDS Gen 3)
Težina artikla: Otprilike 2 funti (0.91 kg)
Dimenzije paketa: Približno 8 x 6 x 6 inča (20.3 x 15.2 x 15.2 cm)
Proizvođač: Simrad

10. Garancija i podrška

For warranty information and technical support, please refer to the official Simrad website or contact your authorized Simrad dealer. Keep your proof of purchase for warranty claims.

Online resursi: For the latest product information, software updates, and additional support resources, visit the Simrad Store or the official Simrad website.

	Simrad NSX Kratki vodič: Podešavanje, funkcije i rad Započnite s korištenjem višenamjenskog ekrana Simrad NSX. Ovaj vodič pokriva početno podešavanje, meni za brzi pristup, aplikacije, upozorenja, sistemske postavke i još mnogo toga za efikasnu pomorsku navigaciju.
	Simrad S2009-S2016 Fish Finder: Manuale di Istruzioni Ufficiali Vodič za kompletnu funkciju, konfiguraciju, instalaciju i rukovanje u sistemima Simrad S2009 i S2016 Fish Finder. Scopri le funzionalità avanzate e le specifiche tecniche per la pesca e la navigazione marittima.
	Simrad I3007 Uputstvo za instalaciju Ovaj dokument pruža smjernice za instalaciju Simrad I3007, detaljno opisujući tehničke specifikacije, informacije o konektorima, uzemljenju i sistemskoj examples.
	Simrad NSS evo3S Uputstvo za upotrebu - Sveobuhvatni vodič za pomorsku navigaciju Istražite uputstvo za upotrebu Simrad NSS evo3S za detaljan uvid u pomorsku navigaciju, kartografiranje, sonar, radar, autopilot i prilagođavanje sistema. Osnovni vodič za nautičare.
	Simrad GO XSE uputstvo za instalaciju Sveobuhvatni priručnik za instalaciju višenamjenskih displeja serije Simrad GO XSE, koji obuhvata podešavanje, ožičenje, konfiguraciju softvera i specifikacije za pomorske navigacijske i sonarne sisteme.
	Kratki vodič za bežični autopilot Simrad WR10 i Bluetooth bazu BT-1 Ovaj Kratki vodič pruža osnovne informacije o Simrad WR10 bežičnom kontroleru autopilota i BT-1 Bluetooth baznoj stanici, obuhvatajući standardni sadržaj paketa, dodatnu opremu, specifikacije, dimenzijske crteže, upute za montažu, postupke uparivanja i detalje o radu.

Simrad IP CAM-1