Uvod
The Newland HR52 Bonito is a high-performance 2D CMOS Mega Pixel Handheld Reader designed for retail environments. This device is capable of reading various 1D and 2D barcodes, including DotCode, and features an autosense function for efficient operation. It connects via a 3-meter coiled USB cable, ensuring reliable data transmission to compatible devices such as laptops and desktops.
Slika 1: The Newland HR52 Bonito Handheld Reader. This image shows the black handheld scanner with a yellow trigger button, connected by a coiled USB cable. The Newland logo is visible on the side of the device.
Setup
Follow these steps to set up your Newland HR52 Bonito Handheld Reader:
- Raspakujte uređaj: Carefully remove the HR52 Bonito reader and its coiled USB cable from the packaging.
- Poveži se s host uređajem: Insert the USB connector of the coiled cable into an available USB port on your laptop or desktop computer.
- Instalacija drajvera (Plug & Play): The device is typically plug-and-play. Your operating system should automatically detect and install the necessary drivers. Wait for the installation to complete.
- Potvrdite vezu: Once connected, the scanner may emit a short beep or an indicator light may illuminate, signifying it is ready for use.
No additional power adapter is required as the device is powered via the USB connection (Operating Voltage: 5 volti).
Uputstvo za upotrebu
The HR52 Bonito is designed for intuitive operation. Here's how to use it:
- Skeniranje bar kodova:
- Point the scanning window of the reader towards the barcode you wish to scan.
- Press and hold the yellow trigger button located on the handle. A red aiming beam or illumination will appear.
- Position the aiming beam over the center of the barcode.
- Once the barcode is successfully read, the scanner will typically emit a beep and/or an indicator light will flash. The scanned data will be transmitted to your connected computer as if typed from a keyboard.
- Autosense Mode: The HR52 Bonito supports an autosense feature. When enabled, the scanner can automatically detect a barcode presented within its field of view without requiring the trigger button to be pressed. This is ideal for hands-free operation using an optional stand (not included).
- Podržani bar kodovi: This reader supports a wide range of 1D and 2D symbologies, including but not limited to UPC/EAN, Code 39, Code 128, QR Code, Data Matrix, PDF417, and DotCode.
Održavanje
Proper maintenance ensures the longevity and optimal performance of your HR52 Bonito reader:
- Čišćenje prozora za skeniranje:
- Ensure the device is disconnected from the power source (USB port) before cleaning.
- Lagano koristite meku krpu koja ne ostavlja dlačice dampoprano vodom ili blagim, neabrazivnim sredstvom za čišćenje.
- Gently wipe the scanning window to remove dust, smudges, or debris. Avoid excessive moisture.
- Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the plastic and optical components.
- Generalno čišćenje: Obrišite vanjski dio uređaja mekom, suhom krpom.
- Održavanje kablova: Izbjegavajte oštre savijanja ili pretjerano povlačenje USB kabela kako biste spriječili oštećenje unutrašnjih žica.
- Skladištenje: Store the reader in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
Rješavanje problema
If you encounter issues with your HR52 Bonito reader, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Skener se ne uključuje ili ne reaguje. | USB kabel nije pravilno spojen ili je USB priključak neispravan. | Ensure the USB cable is securely plugged into both the scanner and the computer. Try a different USB port on your computer. |
| Scanner reads some barcodes but not others. | Barcode type not enabled, damaged barcode, or poor print quality. | Verify the barcode is not damaged. Ensure the specific barcode symbology is enabled in the scanner's configuration (refer to advanced programming guide if available). Try scanning a known good barcode. |
| Skenirani podaci su netačni ili nepotpuni. | Incorrect scanner configuration or software issue on host computer. | Check the input settings of the application receiving the data. Ensure the scanner's output format matches the expected input. Restart the computer. |
| Autosense mode not working. | Autosense feature disabled or scanner not positioned correctly. | Ensure the autosense feature is enabled (if applicable, via programming barcodes). Position the scanner on a stable surface with the scanning window facing upwards, allowing barcodes to be presented to it. |
For further assistance, please contact Newland customer support.
Specifikacije
| Feature | Detalj |
|---|---|
| Broj modela | HR5280RT-SF |
| Dimenzije proizvoda | 1.1 x 9.7 x 6.5 inča |
| Tehnologija povezivanja | USB Cable (3 mtr. coiled) |
| Izvor napajanja | Električni sa kablom (napajanje putem USB-a) |
| Operating Voltage | 5 Volts |
| Kompatibilni uređaji | Laptop, Desktop |
| Tehnologija skeniranja | 2D CMOS Mega Pixel |
| Posebne karakteristike | DotCode Enabled, Autosense |
| Proizvođač | Newland |
Garancija i podrška
For warranty information and technical support, please refer to the official Newland webstranicu ili kontaktirajte lokalnog distributera. Sačuvajte račun kao dokaz o kupovini za reklamacije u slučaju garancije.
Newland Contact Information: www.newland-id.com
