Uvod
Thank you for choosing the Miracase Upgraded Version Cup Phone Holder. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new car phone mount. Designed for universal compatibility and superior stability, this holder ensures your smartphone is securely positioned for safe and convenient access while driving.
Šta je uključeno
Your Miracase Cup Phone Holder package includes the following components:
- 1x Adjustable Car Cup Holder Base
- 1x Universal Phone Clamp
- 1x Korisnički priručnik (ovaj dokument)
Postavljanje i instalacija
Follow these steps to properly install your Miracase Cup Phone Holder:
- Sastavite držač: Attach the universal phone clamp to the adjustable long neck arm. Ensure the nut (Nut1) is tightened to secure the clamp.
- Pripremite bazu: Locate a suitable cup holder in your vehicle. The Miracase base is designed to fit most car cup holders with a diameter between 2.6 and 4.0 inches.
- Expand the Base: Insert the cup holder base into your car's cup holder. Twist the knob on the base clockwise to expand the anti-skid silicone pads until the base is securely locked in place and does not wobble. Twist counter-clockwise to shrink.
- Podesite ruku: Loosen the nuts (Nut2 and Nut3) on the adjustable long neck to position the phone holder at your desired height and angle. The arm can extend up to 11 inches and offers 180-degree and 270-degree articulation for optimal viewing. Once positioned, tighten the nuts to secure the arm.
- Umetni broj telefona: Press the release button on the back of the phone clamp to open the arms. Place your smartphone into the cradle and gently squeeze the arms together until your phone is held firmly. The deeper clamp arms and soft holding feet provide 360-degree protection.
Uputstvo za upotrebu
The Miracase Cup Phone Holder is designed for ease of use and maximum flexibility:
- Phone Insertion and Removal: To insert your phone, press the release button on the back of the phone clamp to open the arms. Place your phone in the cradle and gently push the arms inward until it is securely held. To remove, press the release button again.
- Podešavanje Viewugao ugla: The holder features two adjustable knobs on the long neck, allowing for precise positioning. Loosen the knobs to adjust the height and angle (up to 180 and 270 degrees of rotation), then tighten them to lock the position. This ensures a perfect view angle for navigation, calls, or music without obstructing your driving sight.
- Univerzalna kompatibilnost: The super wide adjustable clamp arms accommodate all cell phones from 4.0 to 7.0 inches, including those with thick cases (e.g., Otterbox, battery cases, wallet cases, MagSafe cases).
- Pristup punjenju: The design includes a 0.6-inch depth at the bottom of the clamp, allowing easy access for charging cables while your phone is mounted.
Održavanje
To ensure the longevity and optimal performance of your Miracase Cup Phone Holder, follow these simple maintenance guidelines:
- čišćenje: Obrišite držač mekom krpomamp cloth to remove dust and grime. Avoid using harsh chemicals or abrasive cleaners, as they may damage the surface.
- Provjerite nepropusnost: Periodically check that all adjustable knobs and the base expansion mechanism are securely tightened to maintain stability, especially after prolonged use or driving on rough roads.
- Skladištenje: If not in use for an extended period, you may remove the holder from your cup holder and store it in a cool, dry place.
Rješavanje problema
If you encounter any issues with your Miracase Cup Phone Holder, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Holder is unstable or shaking | Base not fully expanded in cup holder; adjustable knobs not tightened. | Twist the base knob clockwise to expand fully until snug. Ensure all adjustable nuts (Nut1, Nut2, Nut3) are tightened after positioning. |
| Telefon nije sigurno pričvršćen | Clamp arms not fully closed around phone; phone size outside compatible range. | Gently squeeze the clamp arms together after placing the phone until it is firm. Ensure your phone is between 4.0 and 7.0 inches. |
| Difficulty adjusting angle/height | Adjustable knobs are too tight. | Loosen the adjustable knobs slightly before attempting to reposition the arm. Tighten once the desired position is achieved. |
Specifikacije
- Dimenzije proizvoda: 5.7 x 4.5 x 3 inča
- Težina artikla: 9.9 unce
- Broj modela: Cup Phone Holder Car-CA052
- Compatible Phone Sizes: 4.0 - 7.0 inča
- Cup Holder Compatibility: 2.6 - 4.0 inches diameter
- Podesiva visina: Do 11 inča
- Vrsta montaže: Cup Holder
- Boja: Crna
Garancija i podrška
Miracase is committed to providing high-quality products and premium customer care. While specific warranty details are not provided in this manual, for any product-related inquiries, technical support, or warranty claims, please contact the seller directly through your purchase platform. Please retain your proof of purchase for any support requests.
For more information or to explore other Miracase products, please visit the official Miracase Store online.
