Güde 94422

Güde GPR 822 PRO Post Driver Instruction Manual

Model: 94422

Uvod

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Güde GPR 822 PRO Post Driver. Please read these instructions carefully before using the device to ensure proper handling and to prevent injury or damage. Keep this manual in a safe place for future reference.

Sigurnosna uputstva

Always observe general safety regulations when operating power tools. Failure to follow these instructions may result in serious injury or property damage.

Product Overview

The Güde GPR 822 PRO is a powerful, portable post driver designed for efficiently installing fence posts. It features a robust 4-stroke engine for reliable performance.

Güde GPR 822 PRO Post Driver

Image: The Güde GPR 822 PRO Post Driver, showcasing its engine and driving mechanism. This view highlights the main components of the device.

Güde GPR 822 PRO Post Driver in Carrying Case

Image: The Güde GPR 822 PRO Post Driver stored securely within its durable black carrying case, ready for transport or storage.

Ključne komponente:

Tehničke specifikacije

FeatureVrijednost
Tip motora4-taktni
Potrošnja goriva0.65 l/h
Snaga motora0.8/1.0 (kW/HP)
Displacement31 cm³
Engine Speed (max)7500 o/min
Kapacitet rezervoara za gorivo0.6 l
Vrsta gorivaBenzin
Pokretanje sistemaPočetak oporavka
Kapacitet motornog ulja0.07 l
Tip motornog ulja10W40
Referenca proizvođača94422

Postavljanje i priprema

Before starting the post driver, ensure it is properly prepared with fuel and oil.

1. Fueling the Engine:

Use only clean, fresh gasoline. The fuel tank capacity is 0.6 liters.

2. Dodavanje motornog ulja:

The engine requires 10W40 engine oil. The oil capacity is 0.07 liters.

Measuring Cup for Fuel/Oil

Image: A clear measuring cup, typically used for accurately measuring fuel or oil volumes before adding them to the engine.

Tools and Measuring Cup

Image: A set of T-handle wrenches and a measuring cup, essential tools for assembly, maintenance, and precise fluid measurement for the post driver.

Uputstvo za upotrebu

Pokretanje motora:

  1. Place the post driver on a stable, level surface.
  2. Ensure the fuel and oil levels are correct.
  3. Postavite prekidač motora u položaj "UKLJUČENO".
  4. If the engine is cold, apply the choke.
  5. Pull the recoil starter handle firmly and smoothly until the engine starts. Do not pull the cord to its full extension.
  6. Once the engine starts, gradually open the choke (if used).
  7. Allow the engine to warm up for a few moments before operating.

Driving Posts:

  1. Position the post driver squarely over the top of the fence post.
  2. Ensure the post is vertical and stable before beginning to drive.
  3. Hold the post driver firmly with both hands, maintaining a secure grip on the handles.
  4. Engage the throttle to increase engine speed and begin the driving action.
  5. Apply steady, downward pressure to guide the post driver and keep it centered on the post.
  6. Continue driving until the post reaches the desired depth.
  7. Release the throttle to reduce engine speed and stop the driving action.
  8. Carefully lift the post driver off the post.

Zaustavljanje motora:

  1. Release the throttle to allow the engine to idle.
  2. Postavite prekidač motora u položaj "ISKLJUČENO".
  3. Wait for the engine to cool down before storing or performing maintenance.

Održavanje

Regular maintenance ensures the longevity and optimal performance of your post driver.

Nakon svake upotrebe:

Regular Checks (e.g., every 10-20 operating hours):

Skladištenje:

Rješavanje problema

Ovaj odjeljak se bavi uobičajenim problemima na koje možete naići. Za probleme koji nisu ovdje navedeni, obratite se kvalificiranom servisnom osoblju.

ProblemMogući uzrokRješenje
Motor se ne pokrećeNo fuel; Engine switch OFF; Choke not applied (cold engine); Fouled spark plug; Clogged fuel filter.Add fuel; Turn switch ON; Apply choke; Clean/replace spark plug; Clean/replace fuel filter.
Motor radi loše/nema snageDirty air filter; Stale fuel; Incorrect oil level; Fouled spark plug.Clean/replace air filter; Use fresh fuel; Check/adjust oil level; Clean/replace spark plug.
Pretjerane vibracijeLoose components; Damaged driving mechanism.Check and tighten all fasteners; Inspect driving mechanism for damage and replace parts if necessary.

Garancija i podrška

Information regarding warranty coverage and spare parts availability is not provided in the product details. For warranty claims, technical support, or to inquire about spare parts, please contact your authorized Güde dealer or the manufacturer's customer service directly. Always provide your model number (94422) and purchase date when seeking support.

Manufacturer: Güde

Broj modela: 94422

Povezani dokumenti - 94422

Preview Güde Uputstvo za upotrebu vodene pumpe
Ovaj sveobuhvatni priručnik pruža osnovne upute za instalaciju, rad i održavanje Güde vodenih pumpi, uključujući modele serije GP, HWA i HWW. Osigurajte sigurnu i efikasnu upotrebu vaše pumpe.
Preview Güde GSM 500 Uputstvo za upotrebu malčera
Sveobuhvatno uputstvo za upotrebu kosilice Güde GSM 500, koje obuhvata uputstva za montažu, rad, održavanje i sigurnosne upute na više jezika.
Preview GÜDE GLS 3000 VARIO Ručni usisivač/duvač lišća
Sveobuhvatni priručnik za upotrebu i sigurnost za GÜDE GLS 3000 VARIO duvač/usisavač lišća, koji obuhvata montažu, upotrebu, održavanje, rješavanje problema i tehničke specifikacije.
Preview GÜDE GH 2802 SILENT Električni vrtni usitnjivač - priručnik
Sveobuhvatni priručnik za GÜDE GH 2802 SILENT električnu vrtnu drobilicu (model #94376), koji obuhvata upute za montažu, rad, čišćenje, održavanje i sigurnosne upute.
Preview GUDE Stručni priručnik za kontrolu snage 8314/8316
Korisnički priručnik za GUDE Expert Power Control serije 8314 i 8316, koji detaljno opisuje podešavanje, rad, konfiguraciju i tehničke specifikacije ovih jedinica za distribuciju napajanja.
Preview Güde GW 2/2 Workbench Assembly Instructions
Assembly instructions for the Güde GW 2/2 workbench, model #40472. Includes multilingual assembly steps and part lists.