1. Uvod
This manual provides instructions for the installation, operation, and maintenance of the Vimar 02970 thermostat. This device is designed for controlling heating and cooling systems with ON/OFF functionality, featuring a control knob, relay output, and an LED backlight with brightness adjustment. It is compatible with Vimar Eikon, Arké, or Plana frames.
2. Sigurnosne informacije
Instalaciju mora izvršiti kvalificirano osoblje u skladu s lokalnim električnim propisima i propisima.
Disconnect power at the main circuit breaker before installation or maintenance to prevent electric shock.
Ne izlažite uređaj vlazi ili ekstremnim temperaturama.
Ensure proper wiring connections to avoid damage to the thermostat or connected systems.
3. Proizvod je gotovview
The Vimar 02970 thermostat offers intuitive control over your climate system. Key features include:
Kontrolna tipka: For easy temperature adjustment.
LED pozadinsko osvetljenje: Adjustable brightness for clear visibility.
Režimi grijanja i hlađenja: Supports both heating and cooling systems with ON/OFF control.
Friendly Programming: Designed for straightforward setup and use.
Tasterske prečice: Allows for quick interaction with the device.
Slika 1: Prednja strana view of the Vimar 02970 thermostat, showing the central display, control knob, and surrounding icons for temperature units, light, and mode selection.
4. Postavljanje i instalacija
4.1 Raspakivanje
Carefully remove the thermostat and any included components from the packaging. Verify that all parts are present.
4.2 Montaža
The Vimar 02970 thermostat is designed to be integrated into Eikon, Arké, or Plana frames. Ensure the chosen frame is compatible.
Figure 2: The Vimar 02970 thermostat integrated into a wall frame, demonstrating its flush-mount appearance.
4.3 Ožičenje
Before wiring, ensure the main power supply to the circuit is disconnected.
Identify the power supply wires (Live, Neutral) and the heating/cooling system control wires (Common, Normally Open, Normally Closed).
Connect the Live (L) and Neutral (N) wires to the corresponding terminals on the thermostat. The thermostat operates on 100-240V~, 50/60Hz.
Connect the heating/cooling system control wires to the C (Common), NO (Normally Open), and NC (Normally Closed) relay output terminals as required by your system.
Ensure all connections are secure. The terminals are designed for wires up to 6 mm².
Slika 3: Pozadi view of the Vimar 02970 thermostat, showing the screw terminals for electrical connections (L, N, C, NO, NC).
Slika 4: Bočna strana view of the Vimar 02970 thermostat, illustrating the depth and the wiring terminals with specifications (100-240V~, 5(2)A, 1B.U, -T40).
4.4 Početno napajanje
After wiring, restore power at the main circuit breaker. The thermostat display should illuminate.
5. Uputstvo za upotrebu
5.1 Uključivanje/isključivanje napajanja
Pritisnite ikonu napajanja (⏻) located on the bottom left of the thermostat to turn the device on or off.
5.2 Podešavanje temperature
Rotate the central control knob clockwise to increase the set temperature and counter-clockwise to decrease it. The current set temperature will be displayed on the LED screen.
Figure 5: A hand rotating the central control knob of the Vimar 02970 thermostat to adjust the temperature setting.
5.3 Changing Mode (Heating/Cooling)
The thermostat supports both heating and cooling modes. The mode can typically be switched using a dedicated button or a combination of button presses. Refer to the on-screen icons for current mode indication (e.g., snowflake for cooling, sun for heating).
5.4 Podešavanje svjetline pozadinskog osvjetljenja
The LED backlight brightness can be adjusted. Consult the Vimar website for specific instructions on accessing this setting, as it may involve keyboard shortcuts.
5.5 Programming (If Applicable)
The thermostat features "Friendly Programming." For detailed instructions on setting schedules or advanced programming options, refer to the comprehensive tutorials available on the official Vimar website.
6. Održavanje
čišćenje: Wipe the thermostat surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
inspekcija: Periodically check for any loose connections or signs of damage. If damage is observed, disconnect power and contact a qualified technician.
7. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Prikaz termostata je isključen. | Nema napajanja. | Check the main circuit breaker. Ensure wiring connections are secure. |
| System (heating/cooling) not responding. | Incorrect wiring; thermostat in wrong mode; set temperature not reached. | Verify wiring connections. Ensure the thermostat is in the correct mode (heating/cooling). Adjust the set temperature to be above/below the ambient temperature to trigger the system. |
| Očitavanje temperature izgleda netačno. | Na lokaciju termostata utiču propuh ili izvori toplote. | Ensure the thermostat is not installed near windows, doors, or direct heat/cold sources. |
8. Specifikacije
| Feature | Detalj |
|---|---|
| Broj modela | 02970 |
| Brand | VIMAR |
| Voltage | 100-240V~ |
| Frekvencija | 50/60Hz |
| Relejni izlaz | 5(2)A, 1B.U |
| Radna temperatura | -T40 (Specific range not provided, consult Vimar documentation) |
| Težina artikla | 70 g |
| Dimenzije proizvoda | 4.15 x 4.48 x 4.9 cm (42D x 45W x 49H millimeters) |
| Tip kontrolera | Mehaničko dugme |
| Posebne karakteristike | Lighted (LED Backlight) |
| Povezivanje | Žičani |
| Kompatibilni okviri | Eikon, Arké, or Plana |
Figure 6: Technical diagram showing the dimensions of the Vimar 02970 thermostat (41.7mm depth, 44.8mm width, 49mm height).
9. Garancija i podrška
For warranty information, technical support, or additional tutorials, please visit the official Vimar website or contact your local Vimar distributor. The Vimar website provides comprehensive instructions and tutorials for programming and advanced features.
Vimar Webstranica: www.vimar.com
